To avoid these ads, REGISTER NOW!

Show your new tool arrivals

M

MrAperture

Well-known member
Joined
Feb 20, 2015
Messages
130
Location
Montreal, Qc
Bought a set of VIM DT6200, a Proto Impact driver set & few Gearwrench 3/8 deep 6pt sizes I was missing.

Honestly, if you need a good set of trim removers, I highly suggest the Vim DT6200 its extremely well made, metal part is thick and its the same exact quality as the MAC. (I believe they are both made by the same factory) you can get em' for 50$

1e0f5ce225981c2c3d5919a4696f4d99.jpg



Sent from my iPhone using Tapatalk
 
To avoid these ads, REGISTER NOW!
T

toufue_yang17

Well-known member
Joined
Jun 1, 2013
Messages
196
Eastwood on ebay had brand new fender rollers going for $89 shipped a month back. The price jumped up to $99 so i picked one up. Don't know the price now.
 
J

JBradley500

Well-known member
Joined
Jul 19, 2013
Messages
781
thecheeseguy said:
How much did that set run you? I've been looking to get a set, but they are expensive, even off Craigslist.
Click to expand...

I got them off of amazon warehouse with "damaged packaging", but I didn't see the damage anywhere. I paid like 75 bucks shipped. The HF set is almost 50 bucks after tax and doesn't get good reviews so I thought I did ok.

I tried local Craigslist for US made but they have been 125-175 bucks used and about 2-3 hours of driving. A couple of years ago there was a Wright set for $75 bucks really close to me but I didn't think I needed it. That was a mistake.
 
O

OHMS LAW

Well-known member
Joined
Jun 8, 2012
Messages
927
Location
Houston TX
Off the truck today. Started a new account with Matco. I really like this impact compared to mg725. I was using a li ion snap on but Im moving back to air tools for piece of mind. And it's fast.
 

Attachments

  • image.jpg
    image.jpg
    135.3 KB · Views: 132
S

Skin

Well-known member
Joined
Feb 24, 2010
Messages
11,713
Location
Boston
A taste of Europe.

Felco F8
Knipex Cobolt offset
Knipex 10" Cobra
Knipex 5" Cobra
Knipex Titanium Tweezers (I don't think they actually make them)
Gedore 7UR 10mm to satisfy my curiosity. I'll put it to real use but first impression is that the ratcheting action is very course with a fair amount of drag. I'm happy I didn't get a set.

311outh.jpg
 
Last edited:
K

K-Dog

Well-known member
Joined
Mar 15, 2014
Messages
2,523
Location
Millersville Maryland
NoiseRacing said:


price finally came down on these and I'm sick of renting.
Click to expand...

I am intrigued by this tool.

I have not found the Eastwoods deal, but I found a knock off for a good deal. Some reviews on Amazon claim its completely identical to Eastwoods. Possibly rebranded.

Since it seems you have done more than a few, on average how much time per wheel well ?
What if any complaints to you have with that tool?
I am seeing a few new quarter panels that are getting hemmed in the wheel house, I can only assume this tool would work like a champ in that setting.
 
T

toufue_yang17

Well-known member
Joined
Jun 1, 2013
Messages
196
K-Dog said:
I am intrigued by this tool.

I have not found the Eastwoods deal, but I found a knock off for a good deal. Some reviews on Amazon claim its completely identical to Eastwoods. Possibly rebranded.

Since it seems you have done more than a few, on average how much time per wheel well ?
What if any complaints to you have with that tool?
I am seeing a few new quarter panels that are getting hemmed in the wheel house, I can only assume this tool would work like a champ in that setting.
Click to expand...

I think $120 for a brand new Eastwood fender is still a deal going on right now.
 
N

NoiseRacing

Well-known member
Joined
May 8, 2011
Messages
47
Location
Orangeville, ON
K-Dog said:
I am intrigued by this tool.

I have not found the Eastwoods deal, but I found a knock off for a good deal. Some reviews on Amazon claim its completely identical to Eastwoods. Possibly rebranded.

Since it seems you have done more than a few, on average how much time per wheel well ?
What if any complaints to you have with that tool?
I am seeing a few new quarter panels that are getting hemmed in the wheel house, I can only assume this tool would work like a champ in that setting.
Click to expand...

They still have it on their site for 129.99

those amazon ones good be very well rebranded as they are made in Taiwan

Time wise varies a little on the car the last miata i did only took 40 mins or so a corner, but it was the second one i had done. I'm expect 50-60 mins a corner on my subie.

My only complaint would be with the gauld up threads on the adjustment rod of the last one i rented. This could have been somebody moving to much metal two quick instead of using it properly though or just from normal wear. An ACME threaded rod might the solution if this too happens to mine.
 
9

90zcar

Well-known member
Joined
Nov 8, 2013
Messages
3,254
Decided I'd get the credit card out today for this purchase. Rare USA made lisle battery terminal brush.
44ef7e7926241c1b1dd77f7c1c6a965d.jpg



Sent from my iPhone using Tapatalk
 
To avoid these ads, REGISTER NOW!
C

Chngalay

Well-known member
Joined
Mar 7, 2015
Messages
63
Location
Texas
3/4" x 18" Bosch SDS Plus concrete bit. Needed it to rehang the back gate and will also be used when installing the two post lift I will be buying soon.
 

Attachments

  • 001.jpg
    001.jpg
    145.4 KB · Views: 98
R

Ruger_556

Well-known member
Joined
Dec 8, 2013
Messages
4,005
MrAperture said:
Flexzilla is the best, you wont regret it. Purchased mine this winter and worked with it at -15F no problems. Best air hose money can buy


Sent from my iPhone using Tapatalk
Click to expand...

Nah, Parker Push-Lok is nicer, the price reflects that though.

This is a lot smaller than I thought it was going to be.
 
W

WaveBlaster1200

Active member
Joined
Dec 22, 2014
Messages
25
Location
CenCal
MrAperture said:
Flexzilla is the best, you wont regret it. Purchased mine this winter and worked with it at -15F no problems. Best air hose money can buy


Sent from my iPhone using Tapatalk
Click to expand...
Only bad thing I've read about is the green shows dirt pretty easily. Oh well.
 
Last edited:
D

dutchgray

Well-known member
Joined
Sep 28, 2014
Messages
6,465
Location
Dorset. England.
View media item 49531Estwing EB15SR hammer and E323LP pick, got all 3 versions of the ultra now, this is the new version of it.
Channelock screwdrivers, one large strait and the precision set, thought I would give them a try for dirty work as acetate handles are easy to clean.
 
9

94blu1500

Well-known member
Joined
Jul 19, 2013
Messages
51
Found these at the junk yard yesterday got a 1993 double ratcheting wrench, a 1956 7/8 12 point socket, a 5/16 sk wrench, and a belzer 1 & 1/16 wrench

5539fac30a92bd3fbe4ea5969f34f288.jpg

843b58b56b9bb4b2f865178e40af6987.jpg



Sent from my iPhone using Tapatalk
 
G

G-Ram

Well-known member
Joined
Dec 10, 2012
Messages
565
Location
NWO
Jet 3/8 drive crowfoot sets, 3/8 drive extension set, and Mastercraft T15 screwdriver, replaced under warranty as the end twisted and eventually stripped...




Sent from my iPad using Tapatalk
 
M

MrAperture

Well-known member
Joined
Feb 20, 2015
Messages
130
Location
Montreal, Qc
zkling said:
Down here in the states, the $1,$5,$10, $20 and $100 are all the same size.
Click to expand...


lol I know I was just kidding, in Canada we dont have 1$ bill so if you hit the ********** you better have real money and they are color coded so everybody can see you'r throwing 5's


Sent from my iPhone using Tapatalk
 
P

panknuckshovel

Well-known member
Joined
Apr 29, 2014
Messages
2,990
Location
Land o Lakes FL
MrAperture said:
lol I know I was just kidding, in Canada we dont have 1$ bill so if you hit the ********** you better have real money and they are color coded so everybody can see you'r throwing 5's


Sent from my iPhone using Tapatalk
Click to expand...

Yah, tipping with a looney at the Windsor ballet got you snubbed real quick and coin slot jokes are a big no-no.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom