Got the compressor a few days ago, moved it into the garage, added a breaker to my main panel, punched through the wall, mounted a sub panel, piped the conduit in, pulled all the wires, added service disconnect for compressor, and there she is. Added bonus is that i was able to add 2 20 amp 120 volt breakers i the sub panel too, so i wont keep tripping the stupid 15s thag are in the garage already lol.
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
stg454
Well-known member
fresh off the truck
What brand are those socket racks?
Strouty
Well-known member
NOS plomb,it was still covered with black conservant when i got it..
The "WF" stands for "War Finish" and given your location, more than like came out of a WWII era U.S. Military tool kit of some sort. Cool stuff regardless.
TheRobotCow
Well-known member
- Joined
- Dec 11, 2014
- Messages
- 176
Gotta love promos!
First is my new Mac cart, set of Cornwell ½ metric impact sockets 10mm-22mm 24 & 27, and a 24" mac magnetic rail
Sent from my iPhone using Tapatalk
First is my new Mac cart, set of Cornwell ½ metric impact sockets 10mm-22mm 24 & 27, and a 24" mac magnetic rail
Sent from my iPhone using Tapatalk
buddy found it,along with some NOS aircraft parts Travisnd
Well-known member
Had these shipped to the local Sears and picked them up today!! All Made in USA!! 
WhiffySpark
Well-known member
- Joined
- Oct 22, 2009
- Messages
- 6,252
abvw
Well-known member
Is that the new CAT1300 catalog?
MattVette89
Well-known member
Nice. Now you have to get the stubby flex. They are awesome.
TheRobotCow
Well-known member
- Joined
- Dec 11, 2014
- Messages
- 176
It looks like it
WhiffySpark
Well-known member
- Joined
- Oct 22, 2009
- Messages
- 6,252
Yeah he had them today
Jarhead0408
Well-known member
Westling.
MattVette89
Well-known member
Shout out to KCTool (www.kctoolco.com). Picked up these plus a magnetizer/demagnetizer and a couple other impact power bits. They even threw in a thank you gift. No, thank you.
Attachments
Nephronracing
Well-known member
MattVette89
Well-known member
I believe "you ****!"
IFMJohn
Well-known member
This is my newest tool arrival.
I don't want to talk about why i bought it.
This is my newest tool arrival.
I don't want to talk about why i bought it.
Too bad!!! You posted it I want to hear the story.
Sent from my iPhone 6 using Tapatalk.
padronanniversary
Well-known member
I was debating on buying that here in town. By the way nice Duc
Saw my snap on guy at a local garage and swung in and grabbed this 3/8 impact 12point 14mm socket for an upcoming dodge ram ujoint job I'm doin at my place
Sent from my iPhone using Tapatalk
I just did the U-joints on my 1500 a couple months ago. I don't have it in front of me, but I remember the clearance being minimal, even for a 1/2" ratchet. Might work with a good impact swivel. Good luck.
Nephronracing
Well-known member
Thanks. I love that bike. Seemed like too good of a deal to pass up. I must say I'm glad I beat you to it. Retired mechanic sold it. Ended up BSing with him for almost 2 hours.
IFMJohn
Well-known member
Let me preface this by saying that i have never locked my keys in my car... until today.
Pulled into work,rocking out to some good country music, smoking a marlboro red... it was going to be a good day! Got out of my car, nodded to my foreman as he pulled in, closed the car door... Then all I could think was ****. All my car doors were locked with the car running.
Customer walked over and helped me try to break into my car with a clothes hanger that i style from our Cintas rack. No luck. My service manager brought me a sturdier clothes hanger. After 40 minutes of trying to get my car unlocked, the snap-on man pulls in. So i went on the truck and bought it from him. Tried to unlock it for another half hour. Day shift foreman clocks out to go home and sees my about to break a window with a hammer and comes over. Another 30 minutes or so later he managed to pop the lock.
I've got a new respect for my Toyota. For a 2006 corolla with no power anything, they made it a ********** to break into. It took 8 mechanics and one truck driver over an hour and a half to break into it.
The slim jim didnt help at all.
IFMJohn
Well-known member
What truck do you go on that sells westling socket rails??fresh off the truck
I wish our trucks stocked those :/
MoToys
Well-known member
The slim Jim only works on vertical linkages not horizontal. Give me a slim Jim and a car with a vertical linkage and I'll have it opened faster than you could with a set of keys.
It's not just having the tool it's knowing how to use it.
It's not just having the tool it's knowing how to use it.
MattVette89
Well-known member
Basically no good on modern cars. I use the pump air bag with the long bendable lockout tool if I have to get into a car. It's fast.
Yeah I bought one of these because I was always locking my keys in my car.
http://www.matcotools.com/catalog/product/LT146/MULTI-PIECE-EASY-ACCESS-KIT/
Then I discovered intelligent access cars. Never have to take my keys out of my pocket and if I do the drivers door never locks. Perfect invention for people like me.
Now I carry the lockout set with me everywhere just in case. Never know when I'll need it.
Sent from my iPhone 6 using Tapatalk.
Shootingblanks
Well-known member
I locked myself out of my 2006 Honda Ridgeline for the first time last year at my brother's house. He is one of the few police officers that gets to take the city's squad car home and luckily he had one of those full elaborate vehicle and entry lockout kits in a bag with slim Jim, wedges, bars, etc. He placed a wedge between door and window and was able to place a big easy in between the void and managed to trip the unlock button in a matter of a few minutes. He told me that they do not offer the service to people unless it's an absolute emergency like an infant locked in a car, etc.
Stooge
Well-known member
first of a few new deliveries coming in today! i've had enough fun with the cheap spot weld drill bits and i have quite a few spot welds that will be needing to be drilled out in the very near future. i've never heard anything bad about Blair, so if i end up liking these, i'll probably end up with one of their larger sets soon.
MattVette89
Well-known member
What is it?
home made piston ring compressor
damienga15de
Well-known member
- Joined
- Sep 9, 2014
- Messages
- 128
New knipex ferrule crimper straight in from Germany 
OCD
Well-known member
first of a few new deliveries coming in today! i've had enough fun with the cheap spot weld drill bits and i have quite a few spot welds that will be needing to be drilled out in the very near future. i've never heard anything bad about Blair, so if i end up liking these, i'll probably end up with one of their larger sets soon.
You will like the Blair!! It's awesome!! I can grind but can't weld!!
Heavy Metal Doctor
Well-known member
first of a few new deliveries coming in today! i've had enough fun with the cheap spot weld drill bits and i have quite a few spot welds that will be needing to be drilled out in the very near future. i've never heard anything bad about Blair, so if i end up liking these, i'll probably end up with one of their larger sets soon.
You'll love 'em! I've been using them for nearly 20 years (when did they first come out? 97?). Even for some crazy stuff like drilling truck frames in a pinch.
Very often do 1/4" thick -- Punch holes in steel in seconds!
Hey_Pontiac
Member
-25% off on channellock in Canadian Tire. Cant resist.
-25% off on channellock in Canadian Tire. Cant resist.
Nice! Going to CT in 30 min!!!
