Snap-on/Accuride drawer slides

[toddoky]

Just thought I'd let others that have Snap-on boxes with Accuride slides know that you can obtain worn out detent bumpers for them directly through Accuride. I received confirmation today from Accuride that a complete set of bumpers for the slides in my 25 year old KR 1000B are on their way to me no charge. I've always gotten great customer service from Snap-on, but I wanted to go this route to test Accuride's warranty directly.

 

[plinker]

Are there detent's for the wide bottom drawer? Mine wont stay shut with out a magnet assist. I had replaced all the other detents, but those slides were different.

 

[rodsnratfinks]

Usually, the detents on the heavy duty drawers are a roller type that is sandwiched between the two outer slides.


Sent from my iPhone using Tapatalk

 

[toddoky]

Usually, the detents on the heavy duty drawers are a roller type that is sandwiched between the two outer slides.


Sent from my iPhone using Tapatalk

That's correct, these two round style bumpers are included in the shipment along with the rivets that hold them in and work as their axles for them to rotate on.

 

[Buckgnarly]

That's correct, these two round style bumpers are included in the shipment along with the rivets that hold them in and work as their axles for them to rotate on.

Can you get pics when they come in? I have done all the stops and dog bones on all my KR series Accurides except this. never knew the big drawers had stops.

 

[toddoky]

Can you get pics when they come in? I have done all the stops and dog bones on all my KR series Accurides except this. never knew the big drawers had stops.

Sure, no problem.

 

[toddoky]

Can you get pics when they come in? I have done all the stops and dog bones on all my KR series Accurides except this. never knew the big drawers had stops.

This is the slide from the largest drawer on my KR1000B; you can see the location where the detent wheel would reside if it were still present and the rivet that is still in place. Your large slides should be similar, but they may be a different part number and/or use a different quantity of them if you have a KR1000, KR1000A or KR1000C. The two large medium depth drawers on the KR1000B used the same slides as all the other smaller drawers but I know for certain The KR1000 and KR1000A used specific slides on the two medium depth drawers that were different from the slides on the smaller drawers.

[/URL][/IMG]