Rough Cost Estimate Please

[Greatwhitewing]

I hope this hasn't been beat to death.
Either one large overhead door in front or two 8' wide and an 8 wide in rear. One 36"x80" door in side
20 w 30-36 deep x 10h walls
I would do electrical work
25 year 3 tab shingles
Overhangs all four sides
No sheetrock or insulation
residential look

Rough cost for materials and rough cost for finished minus electrical.
Property in MASS
I saw 28-30k finished and 6k for material but I don't trust those numbers

 

[kd3pc]

siding or exterior choice could easily add 50% to your estimate...brick? Hardy? Vinyl?

Slab? Floor finish could add $5 per sqft. if epoxy as opposed to sealer.

Others more local may have better numbers based on what you are calling residential look?

 

[matt_i]

Is there any concrete? (guessing yes due to residential look). How thick of a floor and is there any reinforcing steel?
Poured walls, block walls, how deep?
Is there any brickwork or is it vinyl siding?
Is the door the cheap skin or a 2-1/8" thick fully insulated door with windows?
How many widows? and cheap single pane or double pane vinyl?

I would say 30k is about right dependent on above. Windows alone could swing you $6k depending on quantity and quality.

 

[Greatwhitewing]

siding or exterior choice could easily add 50% to your estimate...brick? Hardy? Vinyl?

Slab? Floor finish could add $5 per sqft. if epoxy as opposed to sealer.

Others more local may have better numbers based on what you are calling residential look?

Vinyl siding. If I epoxy coat floor I will do it later myself

Need a slab floor and removal of patio blocks in place now

 

[Greatwhitewing]

Is there any concrete? (guessing yes due to residential look). How thick of a floor and is there any reinforcing steel?
Poured walls, block walls, how deep?
Is there any brickwork or is it vinyl siding?
Is the door the cheap skin or a 2-1/8" thick fully insulated door with windows?
How many widows? and cheap single pane or double pane vinyl?

I would say 30k is about right dependent on above. Windows alone could swing you $6k depending on quantity and quality.

Good questions on the floor. I would like the option of a lift in the future so I would probably need thicker than normal. Assume a four post would put less stress on the floor.

I don't think I would go with insulated doors, few windows and one regular door

 

[marksland]

I'm in MA and just finished framing, sheathing and windows with full foundation walls and concrete floor poured on my 30' x 40' x 12' garage. All total I am into for over 30k right now.

 

[Greatwhitewing]

I'm in MA and just finished framing, sheathing and windows with full foundation walls and concrete floor poured on my 30' x 40' x 12' garage. All total I am into for over 30k right now.

Can I ask a dumb question, what's a full foundation for a garage? Footings and a wall a foot or two off the grade?

 

[marksland]

Can I ask a dumb question, what's a full foundation for a garage? Footings and a wall a foot or two off the grade?

In my case footings, stub walls on two sides and 6 to 8 foot on the others.

Sent from my SAMSUNG-SM-G870A using Tapatalk