Show your new tool arrivals

[mingus2112]

New for me from Ryobi

I just got this as well. MAN is it great. More than enough torque on my lug nuts. Haven't used it for anything else yet. I couldn't find it at any of the home depots around me and had to take to ebay. Found a seller who was listing it with free shipping for cheaper than home depot was listing it. It'll probably be cheaper after Thanksgiving, but when I want something. . . .

Anyway, great buy! I know there's not a lot of love for Ryobi around these parts, but I love it. As long as you get the right tools (they have a MILLION. . .and this impact wrench is the RIGHT TOOL), Ryobi is great!

-J

 

[RalloZ35]

Finally got a deal out of snapper guy I think... Still seemed ridiculous but 399 for the set, pakpb071


Sent from my iPhone using Tapatalk

 

[JAKE-THE-TOOL-MAN]

Almost like you are calling them second tier tools...

not at all, my intention was not for it to come across that way

 

[chilly460]

Auction find today, Baldor 333b and stand...$95. I don't think it was ever used, buffing wheels have no rouge on them and thing is perfectly clean.

 

[gtg082y]

Auction find today, Baldor 333b and stand...$95. I don't think it was ever used, buffing wheels have no rouge on them and thing is perfectly clean.

Wow... I've been cruising for a nice used Baldor for a long time. Great grab.

 

[brendancunningham4]

this thread is a 1/4 mile long

 

[ATK305]

Bought the last US made Husky 1/2" torque wrench at the Redlands HD. The new Chinese made versions were on top. I needed a half inch for a suspension job so I figured I would try one. Don't think I would use it to build an engine but it should be fine for this job and at $84.00 it was half the cost of a P.I. wrench.

 

[Silentt]

Got an old Mac 1/4 driver, 10mm and 12mm SO 3/8 extended swivel sockets, new Matco 3/8 21mm swivel and some green SO long picks/hook set to match the shorties.

 

[Negen]

Picked up a 6 pack of Proto Duratek screwdrivers from wallmart.com sold by zoro. Paid 53$ 50$ of which was a gift card from my credit card company from rebate points. I think I got a good deal.

 

[Fedwrench]

Picked up a 6 pack of Proto Duratek screwdrivers from wallmart.com sold by zoro. Paid 53$ 50$ of which was a gift card from my credit card company from rebate points. I think I got a good deal.

I would agree Those have quickly become my favorite screwdrivers. I do wish that Proto had the cooler handle colors like Mac's.

 

[dkroth]

Auction find today, Baldor 333b and stand...$95. I don't think it was ever used, buffing wheels have no rouge on them and thing is perfectly clean.

Chilly, that's beyond "you ****" all the way to "fawk you!"

 

[Ruger_556]

I would agree Those have quickly become my favorite screwdrivers. I do wish that Proto had the cooler handle colors like Mac's.

I like the grey Proto handles better, then for some inexplicable reason I ordered a set of orange MAC's

 

[MilwaukeeFish]

Auction find today, Baldor 333b and stand...$95. I don't think it was ever used, buffing wheels have no rouge on them and thing is perfectly clean.

Chilly, that's beyond "you ****" all the way to "fawk you!"

Ditto. I was going to post a "you ****" but a "fawk you" is more appropriate in this case. Nice score! Hopefully one of them will turn up in my neck of the woods for under a c-note someday.

 

[NorthSea92]

3/8 general service set




Sent from my iPad using Tapatalk

 

[bcradio]

3/8 general service set

I have the Williams Taiwan version of that 3/8" ratchet and it is my favorite and most used ratchet.

 

[rdog422]

had it for a while, but this is the new Scratchet, made buy Snap-Off

 

[90zcar]

Brilliant^^^^!!!!!


Sent from my iPhone using Tapatalk

 

[1950mercury]

Auction find today, Baldor 333b and stand...$95. I don't think it was ever used, buffing wheels have no rouge on them and thing is perfectly clean.

Nice

 

[RatZ1LLa]

Received some Ko-Ken Z-eal 3/8 sockets this week, they are amazing.

 

[rdog422]

Received some Ko-Ken Z-eal 3/8 sockets this week, they are amazing.

You won't have to worry about rounding off the head of a bolt with those.

 

[Askme42]

HJE day haul

 

[chris5790]

I have the Williams Taiwan version of that 3/8" ratchet and it is my favorite and most used ratchet.

I bought the blue point version off the truck for $50. The saw that the Williams is like 25 or 30. The blue point is 35 tooth, Williams is 60. That is some serious ********. It's cus they don't want you to like it so much you don't buy the dual 80. **** blue point. At least snap on is some of the best. Blue point is like buying gearwrench or Williams or Blackhawk but 3 times the price

Sent from my LGMS345 using Tapatalk

 

[NorthSea92]

I'm not bothered about the ratchet because I'll be using a Snap On one, I only bought the set because I start a new job next month and as its only a short contract I can't be bothered taking all my Snap On stuff.


Sent from my iPad using Tapatalk

 

[firworks]

HJE day haul

Is that an SK flask?

 

[Tellingthem]

Local true value was having a sidewalk sale. Snagged mostly USA stuff except for the masterlock and freud. Got it all for $17 so not too shabby.

 

[jinx]

Got my amazon order finally.
Aircat 1150
Aircat 802
Williams cutters
Sunex 3329 impact set.

I can't wait to put these to use.

Sent from my XT1097 using Tapatalk

 

[upgrading]

 

[Rogue1987]

3/8 general service set




Sent from my iPad using Tapatalk

I've always liked that set, wish they sold it under the Williams brand (and with the associated decrease in price.)

Sent from my SM-G900V using Tapatalk

 

[Mud]

Fronius Transpocket 1500. Also got a Bizel 17 torch, flowmeters etc for Tig.

 

[Askme42]

Is that an SK flask?

It's actuall a battery back. To charge a phone or something off of.


It was a freebie they threw in. Pretty sweet.

 

[xurusaibobx]

Got an old Mac 1/4 driver, 10mm and 12mm SO 3/8 extended swivel sockets, new Matco 3/8 21mm swivel and some green SO long picks/hook set to match the shorties.

those extended swivel sockets are awesome i use them daily. 10mm 12mm and i use the BMW 13mm thats longer

 

[trever]

Anyone got a link for the extended swivel sockets I can't find them on SO's site

 

[trever]

Got a link for the williams cutters?

 

[jinx]

Got a link for the williams cutters?

https://www.amazon.com/dp/B001DNT1R6/?tag=atomicindus08-20

Sent from my XT1097 using Tapatalk

 

[colin39]

I have the Williams Taiwan version of that 3/8" ratchet and it is my favorite and most used ratchet.

Funny its horses for courses aint it, its the one bit of the kit i hate. It feels notchy noisey and nasty all at the same time

 

[The Toolest Guy]

You have to worry about rounding off the head of a bolt with those.

Not sure why you would say this. Ko-Ken make some of the world's best sockets.
Maybe you meant 'You have to worry about SHEARING off the head of a bolt with those'?.....

 

[Fedwrench]

You have to worry about rounding off the head of a bolt with those.

Why? they have off corner engagement. They're just excellent short 6 point sockets. I've never had an issue with mine.

 

[Fedwrench]

Anyone got a link for the extended swivel sockets I can't find them on SO's site

try looking for PFSXM910B


They come in sizes 10 to 15mm. substitute the last two numbers for different sizes PFSXM913B would be 13mm for example.


https://store.snapon.com/Product-Details-PFSXM912B-P647457.aspx

 

[slee3247]

Estwing ccd45..more of an impulse buy than anything

Sent from my XT1254 using Tapatalk

 

[krc328ic]

Recent purchases from Amazon and the bay. Wilde picks (thanks Hot Deals), step drill, Channel Lock 215's (things HUGE!), tiny Knipex, and a barely used if ever MAC 1/4" Ratchet.