Show your new tool arrivals

[rdog422]

Why? they have off corner engagement. They're just excellent short 6 point sockets. I've never had an issue with mine.

I'm about to go edit this post....... sometimes my hands don't type what my brain thinks. You WON'T have to worry about rounding the heads off bolts. sorry for the confusion.

 

[Fedwrench]

Today's finds:

Snap on SAE nut driver set and the FB333O handled feeler gauge set. The feeler gauge set stores in a plastic tray inside a neat wooden box with a sliding plexiglass cover.

 

[RalloZ35]

I've been so excited all week for this!

Wright 958 18 Piece Full Polish Metric Wrench Set

These things are gorgeous. They feel oh so good. I cannot wait to get a chance to use them. From the smallest to the largest and even the tool roll exudes quality. I went back and forth on these things for a month trying to decide if I should really spend the money on them and now I'm so glad I did. Now there's no question of if I should buy the SAE set, but when.

What did you pay the those wright grips? If you don't mind

 

[hautpot]

The feeler gauge set stores in a plastic tray inside a neat wooden box with a sliding plexiglass cover.

Wow that feeler gage set is nearly $100!

 

[90zcar]

Got these at the morning flea market today for 50 cents a piece
Armstrong 18mm
Gearwrench 8mm
Gearwrench 3/4 hex socket


Sent from my iPhone using Tapatalk

 

[Fedwrench]

Wow that feeler gage set is nearly $100!

Yea, I felt like I didn't get that good of a deal paying $15 for it. Only two sizes have been used.

 

[MattVette89]

Gearwrench 3/4 hex socket

Do you have a specific use for that, or just bought it because it was cheap?

 

[90zcar]

Bought it because it was 50cents and it is brand new....
I don't have that size either
3 very good reasons. Will I ever need it? Probably not....hopefully not lol


Sent from my iPhone using Tapatalk

 

[NoahG]

Kobalt 8pt sockets. Because apparently Kobalt makes 8pt sockets!!


And Craftsman ball drivers.



Sent from my iPhone using Tapatalk

 

[90zcar]

^^^^Hmm. Does kobalt make a 9/32 8pt socket? I could use one of them


Sent from my iPhone using Tapatalk

 

[NoahG]

^^^^Hmm. Does kobalt make a 9/32 8pt socket? I could use one of them


Sent from my iPhone using Tapatalk

Kobalt doesn't, but SOMEONE does, as McMaster-Carr carries what you are looking for.


Sent from my iPhone using Tapatalk

 

[gtg082y]

Some ebay wrenches. Matco WCL set 10-22 missing 14 and 17 was an OK but not smoking deal. The SKs and the industrial Snap Ons were a much better deal. Will be finishing both sets out as soon as good deals come up. My truck tools are going to get much fancier.

 

[uglyjacko]

Got around to taking pictures of them.

 

[MagnumForce]

This


And these


Love those strippers

 

[Jarhead0408]

Nice box. I've always loved the pull out shelf on those.

 

[canuckian]

Couple pairs of grip on's and some Gray flex wrenches. I've never owned a flex set so I figured I'd give these a whirl to see what all the hooplah was about . Thought it was kinda neat that they come packaged in Ernst wrench racks.

 

[Jarhead0408]

Whoa... Those Grays are nice!

 

[SteveCh]

Auction find today, Baldor 333b and stand...$95. I don't think it was ever used, buffing wheels have no rouge on them and thing is perfectly clean.

May be the best deal I've seen anyone get in a year.

 

[Qualitytools]

Kobalt 8pt sockets. Because apparently Kobalt makes 8pt sockets!!


And Craftsman ball drivers.



Sent from my iPhone using Tapatalk

Those Craftsman Ball Driver's are made by Vessel in Japan, you will like them I am sure

 

[lugnut71]

Hey gtg082y I sent you a pm.

 

[jlh92]

Some ebay wrenches. Matco WCL set 10-22 missing 14 and 17 was an OK but not smoking deal. The SKs and the industrial Snap Ons were a much better deal. Will be finishing both sets out as soon as good deals come up. My truck tools are going to get much fancier.

[/IMG]

Nice WCLs! I have 10-19mm and love them. My set is a bit worse for wear than yours though.

 

[zmotorsports]

My latest tool addition that arrived via the big brown truck. I purchased a keyless chuck for my new mill last year and I fell in love with it so last week I used the Enco coupon to get 15% off and free freight to buy a Jacobs keyless chuck and MT3-J33 arbor for the lathe.

Mounted in the tailstock. Looks good don't she?

Mike.

 

[Chadwilliam1]

that chuck is pretty.

 

[MattVette89]

Ordered this off eBay last week for a good deal. Doesn't seem quite as nice as my snap on but the pistol grip seems to give a lot of torque:



This was an impulse buy on the truck today. I have been trying to put together a full set of the old style hard handles. He had this new style on the truck and once I compared them, the new style felt way better in my hand. He gave me a deal I couldn't say no to:

 

[MattVette89]

Bought it because it was 50cents and it is brand new....
I don't have that size either
3 very good reasons. Will I ever need it? Probably not....hopefully not lol


Sent from my iPhone using Tapatalk

I would have bought it, too....lol. Just curious because I didn't know if you needed it for a particular car/job

 

[RalloZ35]

Got a set of matco 1/4 extensions


Sent from my iPhone using Tapatalk

 

[upgrading]

Ordered this off eBay last week for a good deal. Doesn't seem quite as nice as my snap on but the pistol grip seems to give a lot of torque:

Looks decent.
COO ?

The picture of the stubby on the box makes me interested in that.

Excellent.

 

[MattVette89]

No COO on the Matco, but it does feel nice in the hand.

The MAC screwdrivers are USA.

 

[Smokeshow69]

No COO on the Matco, but it does feel nice in the hand.

The MAC screwdrivers are USA.

Correct, the screwdrivers are rebadged proto drivers. I have a set and really like them!

 

[flying eyeball]

https://scontent-sea1-1.**.fbcdn.net/hphotos-xfp1/v/t1.0-9/11752448_1027891367234733_6651866739646192564_n.jpg?oh=4fbdfcb9acb794553e6f260c36ac585c&oe=56566F81

https://scontent-sea1-1.**.fbcdn.net/hphotos-xap1/v/t1.0-9/11828611_1027891973901339_1575497457495018524_n.jpg?oh=d90a817326771faf8521e66f12091d76&oe=56536BFC

 

[AmishFury]

what's the COO on those tekton stubbies?


the wrench that was missing from my amazon order last thursday came in

 

[flying eyeball]

what's the COO on those tekton stubbies?

China...I already have the metric set..they are plenty decent for working on my stuff.

 

[upgrading]

That TOPTUL set is interesting.
Who sells it ?

 

[MattVette89]

China...I already have the metric set..they are plenty decent for working on my stuff.

What did they set you back? I have an old HF set of metric stubbies and I would like to add an SAE set.

 

[Leoruiz]

That TOPTUL set is interesting.
Who sells it ?

Ebay it. There's a member here who sells them there. Cheap. Like $30 IIRC.

 

[Gear Wolf]

I nabbed two sets of Craftsman Premium Ratchets.

 

[tjmonsen5]

TLL72 and FLL80. Thought they might come in handy some day! Dealer was giving 25 bucks any ratchet trade in, so I got rid of some craftsman ratchets for these!

 

[90zcar]

Nice^^ were they new? U musta already put a good hurting on them already if they were!


Sent from my iPhone using Tapatalk

 

[Alexbn921]

Yeaaaa new tools. Finally made the jump from Ryobi.
<a href="http://s122.photobucket.com/user/alexbn921/media/Garage/Tools/20150717_201453_zpspyrwhivw.jpg.html" target="_blank"><img src="http://i122.photobucket.com/albums/o241/alexbn921/Garage/Tools/20150717_201453_zpspyrwhivw.jpg" border="0" alt=" photo 20150717_201453_zpspyrwhivw.jpg"/></a>

 

[zmotorsports]

that chuck is pretty.

Thanks. I used it for the first time last night.

Mike.