illmatyk
Well-known member
I had to return this today, gun was weak. Factory issue maybe. Exchanged it for TiMax impact.
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
I had to return this today, gun was weak. Factory issue maybe. Exchanged it for TiMax impact.
Ditchdigger
Well-known member
Picks off the truck
Needed an inexpensive 1/4" set for my tool cart at the other shop. Taiwan Williams.
They seem OK. Nothing special.
Misplaced my smaller Blackhawk snap ring pliers. Cheaped out on amazon and bought the Tektons.
Am unimpressed. but will work with them a while. Unfortunately they wouldn't fit the first retainer I came across since there is a big ol burr on the end of the tips that I will have to file off
Needed an inexpensive 1/4" set for my tool cart at the other shop. Taiwan Williams.
They seem OK. Nothing special.
Misplaced my smaller Blackhawk snap ring pliers. Cheaped out on amazon and bought the Tektons.
Am unimpressed. but will work with them a while. Unfortunately they wouldn't fit the first retainer I came across since there is a big ol burr on the end of the tips that I will have to file off
Ditchdigger
Well-known member
Dawn 90 Australia 3 1/2" vice
I LOVE this. I have been keeping my eye out for an offset vise for a decade now and have never seen one for sale.
Needed an inexpensive 1/4" set for my tool cart at the other shop. Taiwan Williams.
They seem OK. Nothing special.
Use some Super Lube on that ratchet, you will be impressed by how smooth it can be.
Bighead38
Well-known member
That ratchet and driver are identical to my blue point set. Not sure about the sockets.
Even the case looks the same as my bigger case.
JDon99
Well-known member
Taiwan Williams socket sets are the same as Blue Point.
MattVette89
Well-known member
Courtesy of the hot deals thread, picked this up tonight on clearance on Menard's. Wilde 3-piece small prybar set for $12.99:
derosa
Well-known member
New 13" planer/molder from jet. Replaces my old 12.5" dewalt. Need to pick up some molding knives and wire it to 220.
Wrenches were an amazon arrival 5/16-7/8 for 63.00 to my door. Oddly the 5/8 is not a wrightgrip style but had the right part number. Can't beat the price though.
Wrenches were an amazon arrival 5/16-7/8 for 63.00 to my door. Oddly the 5/8 is not a wrightgrip style but had the right part number. Can't beat the price though.
Attachments
Those look very nice. How much was that set?
A little over $90
Ditchdigger
Well-known member
I now have a full day of using the Williams set to assemble a 750cc Fiat Abarth motor. I like it.
The universal joint is really bulky compared to my snap on 1/4" one.
For $33 shipped I am pleased.
The universal joint is really bulky compared to my snap on 1/4" one.
For $33 shipped I am pleased.
Picked this 1/2HP up today for $50
It doesn't spin long, however, after turning off. Any idea what I can do to fix?
I wish I could help but.... As popular as they are, it would be nice if there was a thread for rebuilding one. Pics and all.
Ive been looking for one for a while now and there pretty hard to find.
Dang, the pics didn't come when I did the quote, This is about the block grinder.
Last edited:
New snap on 1/4 long ratchet.
Sent from my iPhone using Tapatalk
1/4 my ***!!!
Unless snap on came out with something new. I'm trying to compare it to the other sizes of things on ur bench and it's hard.
Looks like a 1/2" to me but I do see a "f72" which means some type of 1/4"
Interesting. Wondering what someone would need that large of a 1/4 ratchet for
Sent from my iPhone using Tapatalk
JAKE-THE-TOOL-MAN
Well-known member
Part number?
Jarhead0408
Well-known member
Jarhead0408
Well-known member
Need to do the all 4 struts on the wife's Honda CRV and saw this MAC Tool MS456, the cost was $89.45 shipped. It was the price between one of the cheap ones and an OTC at about $165.00. Just like some of the guys here I like some of the older US made equipment.
=
=
=
=
=
=
=
=
=
=
=
Looks like they still make a version of that now.
http://www.ebay.com/itm/Single-Acti...:g:W3cAAOSw5IJWeZgu&item=351610518918&vxp=mtr
I think it's a safe bet to say it's produced overseas though. Glad you got a U.S. made model.
Mastermind
Well-known member
Does that mean they came out with the 18" 3/8 flex head finally????
nickb
Member
d.mcfarland
Well-known member
I didn't think the 1/4 had screws in the head like that though.
Jarhead0408
Well-known member
The mystery continues...and I'm intrigued!
Its TLLF72 and new for February. They changed the screw location for strength so people cant blow the guts out of it as easily same as they did on the 1/2" models. Its close to 11" I believe so you'll still just twist the anvil off if you crank on it.
Last edited:
Jarhead0408
Well-known member
Sweet! Looks like it'll be great for access. I think I'll be picking one up. Any idea on MSRP Skin?
JAKE-THE-TOOL-MAN
Well-known member
Ditto! It's not even on the website yet, I checked earlier with the part number Skin posted
youngunn2008
Well-known member
How much did you pay for yours and where from? Looks nice
finally upgraded to an OTC slide hammer. i broke the hub puller attachment on my hf kit a few months ago on a seized bmw hub and got sick of my attachments not all fitting both slide hammers I own.
Jarhead0408
Well-known member
finally upgraded to an OTC slide hammer. i broke the hub puller attachment on my hf kit a few months ago on a seized bmw hub and got sick of my attachments not all fitting both slide hammers I own.
Nice! That's the 9-way right? I just bought that set in November of last year. Pretty nice piece of kit in my opinion.
thanks! It was $80+tax amazon prime
yeah this is the 9-way kit! I wanted the "silver *******" kit but I guess they are no longer made in USA
four.cycle
Well-known member
^ keep your eye on "Owatonna puller" on Ebay and one will pop up if it's not there already.
TLL72 is non flex 9". I have one in front of me as I type.
BASTARDS There goes another $120
I'll put it and the EZ 11" to the test and see which explodes first