Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
neonlazer
Well-known member
JohnM45
Well-known member
Got one out of the box
40" lift height is a night and day difference compared to the HF version.
Sent from my LG-H901 using Tapatalk
I soooo want a Handy lift for the cycles...very nice!
Where'd you find those, four?
Xmoonstompx
Well-known member
It has the down points and the vice, I just threw it on there to try it out.
It doesn't have a way to attach it to the floor, but it is super heavy and at full lift hight with nothing on it it's a ton more stable than the HF I'm used to. It is a bit more narrow than I'm used to (one of the reasons I went with the sport instead of the standard) so I just need to make sure I always strap it down.
Sent from my LG-H901 using Tapatalk
four.cycle
Well-known member
toolmutt:
Ebay.
Ebay.
JBradley500
Well-known member
- Joined
- Jul 19, 2013
- Messages
- 781
Something that i've wanted for a while for oil pressure stuff.
NedNorton
Well-known member
Got one out of the box
40" lift height is a night and day difference compared to the HF version.
Sent from my LG-H901 using Tapatalk
four.cycle
Well-known member
jbradley500 said:
they make sockets for those, if a socket will fit in there.
JBradley500
Well-known member
- Joined
- Jul 19, 2013
- Messages
- 781
I have a SK 4488 socket but I felt the need for this too.
d.mcfarland
Well-known member
The brand new Snap On is only like $20. Pretty reasonable I'd say. USA Craftsman can be had for $5 or something like that.
T_Roze
Well-known member
Something that i've wanted for a while for oil pressure stuff.
Never even thought of this. Sometimes a socket and extension isn't the best fit; against the intake manifold in a gm for example. This would work well to get it turning.
Sent from my iPhone using Tapatalk
MattVette89
Well-known member
Picked this up today 1/2 off. From $72 to $35. Found it in the hot deals thread.
http://www.napaonline.com/p/CHQR14S100
http://www.napaonline.com/p/CHQR14S100
one9gt
Well-known member
Sent from my iPhone using Tapatalk
Strouty
Well-known member
Got my Trusty Cook Stubbies, they also sent me a green monster that is not available yet. It is a model 14 head on a model 7 handle, totally awesome and Thor would be proud.
Got my Trusty Cook Stubbies, they also sent me a green monster that is not available yet. It is a model 14 head on a model 7 handle, totally awesome and Thor would be proud.
Very nice! I love TC hammers!
TK-421
Well-known member
I believe you have to PM them on here and order them via PM rather than a link on their website, for right now anyways. I think they said eventually they'll go up on the website, but until they do you can order them by PMing them and letting them know what you want.
Got my Trusty Cook Stubbies, they also sent me a green monster that is not available yet. It is a model 14 head on a model 7 handle, totally awesome and Thor would be proud.
Whoah you got the thor hammer! That's awesome!
Strouty
Well-known member
It is cool, can't wait to use my new BFH on something uncooperative.
Thanks buddy. What is their username?
Jeepster425
Well-known member
Can someone post a picture of the new shallow impact wobbles and a part number for snap on? My snap on guy doesn't beleive me there's a set. Thanks!
Sent from my SCH-I545 using Tapatalk
Sent from my SCH-I545 using Tapatalk
JonDick13926
Well-known member
No pics, but I've bought a few things in the last couple of days.
Gearwrench microdriver (p/n 85035). Seems like a nice tool. I did work in a little bit of super lube and then "break" it in with a cordless drill, because it seemed a little stiff when I first opened it up. Now it's very smooth.
Bought two new ratchets. 1/2" and 3/8" Proto premium pear head. Didn't need them, but got both for $60 plus $13 shipping. $73 total for both ratchets brand new seemed okay enough.
Also bought a terminal release tool, labeled masterforce. No clue who actually made it. The handle style makes me think Klein. USA made.
Gearwrench microdriver (p/n 85035). Seems like a nice tool. I did work in a little bit of super lube and then "break" it in with a cordless drill, because it seemed a little stiff when I first opened it up. Now it's very smooth.
Bought two new ratchets. 1/2" and 3/8" Proto premium pear head. Didn't need them, but got both for $60 plus $13 shipping. $73 total for both ratchets brand new seemed okay enough.
Also bought a terminal release tool, labeled masterforce. No clue who actually made it. The handle style makes me think Klein. USA made.
Williams 5 pc set and extra #3 phillips to go with it. First time for me with these handles, and I gotta say I really like em. This is a nice set fo the money, but quality control is a little lacking. The shaft on the #3 has a nice curve to it and the #1 and #2's shaft werent inserted into the handles straight. Not sure if it is worth the hassle of exchanging them or not.
Attachments
anndel
Well-known member
Got my Trusty Cook Stubbies, they also sent me a green monster that is not available yet. It is a model 14 head on a model 7 handle, totally awesome and Thor would be proud.
HAMMER TIME
I like Loki
Buckgnarly
Well-known member
No pics, but 207RIPFM.....I think Skin posted some pics earlier.
Not my ad, but here's some good shots...
http://www.ebay.com/itm/-/281953737526?vxp=mtr
Last edited:
anndel
Well-known member
Well, my light finally got here. I'm thoroughly disgusted with the seller though, I have never seen such an abysmal packing job in my entire life. He put the light's box inside a box close to 10 times too big to ship it, and absolutely nothing else. The box was mangled horribly, since there was nothing to support it when it got tossed around by people and machines, and I truly have no idea how the light managed to not get destroyed, as there's no padding inside the box it came in. Guess that's about as real a testament to its ruggedness as you'll ever get.
He didn't even attempt to get a box closer to a proper size, and didn't even attempt to put any newspaper, bubble wrap, plastic bags, packing peanuts, or anything inside the box along with the light.
Like I said, the worst packing job I've ever seen. So steamed, but at least the light got here and seems to be okay.
Here's what the box looked like when I got it
And when I opened it
glad the light works ok. Who's the vendor so we can avoid them? Or just a hint is good?
SHolt
Well-known member
tlpatter
Well-known member
Sent from my iPhone using Tapatalk
Are these in close out at all Lowe's locations? I looked in their site for this set but didn't see it.
panknuckshovel
Well-known member
one9gt
Well-known member
My local store has them on sale right now at 169, normal price is 199. In the lowes clearance thread someone had posted a link that showed it at 79.99 but I couldn't tell in which city. I showed it to the head cashier and she price matched it at 79. When I looked up my store it said 169 as well...
Sent from my iPhone using Tapatalk
Got my Trusty Cook Stubbies, they also sent me a green monster that is not available yet. It is a model 14 head on a model 7 handle, totally awesome and Thor would be proud.
holy moly i thought these #3's was a BFH. Then I thought about getting a #7 as a real BFH. This is a whole nother level of awesome.
Edit: And they branded it. DANG
My local store has them on sale right now at 169, normal price is 199. In the lowes clearance thread someone had posted a link that showed it at 79.99 but I couldn't tell in which city. I showed it to the head cashier and she price matched it at 79. When I looked up my store it said 169 as well...
Sent from my iPhone using Tapatalk
Rang up for $40 in my local store.
Sent from my iPhone using Tapatalk
[email protected]
Well-known member
- Joined
- Mar 4, 2013
- Messages
- 170
Where are you located
Rossco
Well-known member
Those Stubbys look great. So good I've just ordered a pair for work.
They Won't be looking so Stella after a tour of the mine.
They Won't be looking so Stella after a tour of the mine.
Last edited:
TK-421
Well-known member
My enco order won't be here until the 8th, the tracking hasn't updated but my Milwaukee tools should also be here on the 8th, and according to ebay's guess, the two m12 batteries I just won should be here on the 8th as well, presuming the seller gets off his **** and ships them tomorrow.
So the 8th should be a fun day.
So the 8th should be a fun day.
kunkernator
Well-known member
Most of my Enco order came in. Only thing I'm waiting on is the bristle discs.
Gotta love the % off and free shipping deals!
What model number is that dial indicator? I have a few SPI tools, and have been impressed.