scooternut
Well-known member
Was lucky to find some nice old craftsman measuring tools lately. Very nice stuff for quick reference over the bench. I keep them and some others handy on a magnet
Sent from my iPhone using Tapatalk
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Was lucky to find some nice old craftsman measuring tools lately. Very nice stuff for quick reference over the bench. I keep them and some others handy on a magnet
Sent from my iPhone using Tapatalk
Strouty
Well-known member
I believe snap on bought Bahco and these are the same adjustable.
Sent from my XT1254 using Tapatalk
The Bahco ones do not have the teeth, the Snap On ones do and they work great.
dutchgray
Well-known member
Well you have to get something extra to be paying Snap-on prices over Bahco prices other than a red grip.
I have the smaller SO part no ADHW6 and its made in Sweden and doesn't have any teeth. A very well made tool!
A 3/8 dewalt air drill, we'll see how she does. And a sunnex half moon wrench set, ordered the metric but received sae. I'll keep em though they were cheap enough
Sent from my SCH-I545 using Tapatalk
More pics of the sunex wrenches. Just curious on the finish. Must say tho I have a half moon wrench or two in my drawer and never needed one once. Can't even recall how I squired them.
Sent from my iPhone using Tapatalk
Roobaix
Well-known member
starting to upgrade all my cheapo HF and TJ Maxx tools! It's going to be a long run...
I have that Wera and use it as my EDC in my pouch at work. It's great and it'll do the majority of my screwdriving tasks without being all that bulky.
I still have full sets of Wera Chiseldrivers and Felos.
jz43
Member
New HF 29 Gal Air Compressor to replace my 17 yr old Craftsman. It had good reviews and it's much quite than my Craftsman.
vartz04
Well-known member
I really like the wera handles too. Kinda makes me wish I wouldn't have gone Pratt Reed for my normal screwdrivers. I have a bit holder handle from wera (different than this one as it doesn't store the bits in the handle)
Xmoonstompx
Well-known member
Finally found a tape measure that had all the things I wanted on it. Kinda bummed it's COO is China.
Then picked up another one of these
Sent from my LG-H901 using Tapatalk
Then picked up another one of these
Sent from my LG-H901 using Tapatalk
77Mini
Well-known member
Picked up a 3/8" drive torque wrench on the way home today. 60% off. Same as the pic.
MattVette89
Well-known member
Warranty replacement, picked it up today:
What was wrong with the other one?Warranty replacement, picked it up today:
Strouty
Well-known member
Matt is making people look at his crotch!
MattVette89
Well-known member
It was older and well used...the gear inside had chipped and it would not ratchet smoothly, it would catch. I asked my dealer for a rebuild kit, he said they just replace them.
MattVette89
Well-known member
PelicanPines
ALLIANCE MEMBER
Now I can't look at Matt's tools.
MattVette89
Well-known member
d.mcfarland
Well-known member
TK-421
Well-known member
Just got my Milwaukee M12 tools. Not shown are the 2 2.0 batteries I got off eBay that also arrived today, and the 4 bay sequential charger I'm about to head to Home Depot to pick up.
PelicanPines
ALLIANCE MEMBER
Are you saying I shouldn't post a picture of my tool on the internet?
Lol... Nah its all good.
On topic:
Been playing with my new DowelMax doweling jig system. Awesome quality. Was a bit pricey but I got it for a valentines gift from my wife. Sorry for the lack of pictures.
Jeepster425
Well-known member
mjoekingz28
Well-known member
I'm married. Someone has to
Keep to yourself where your new tool arrivals have been.
And dont list them for sale in the classifieds. I dont even think we want them dirtying up the melt down recycling stations
Jazz1
Well-known member
4 Wraplock ratchets were in tool box I bought today. I had to Google Wraplock to see what the heck they were. Also a Bushman hacksaw and some Black Diamond files. I was just expecting a generic tool box for $15. A little wash with lacquer thinner cleaned up the overspray on box
Attachments
Last edited:
Jarhead0408
Well-known member
That is most definitely a score.
You ****!
Congratulations!
You ****!
Congratulations!
Just got my Milwaukee M12 tools. Not shown are the 2 2.0 batteries I got off eBay that also arrived today, and the 4 bay sequential charger I'm about to head to Home Depot to pick up.
Well what do you think of all that red? Have you tried anything out yet?
How much did you get the 3 drills and the ratchet for if you don't mind me asking?
MattVette89
Well-known member
MattVette89
Well-known member
Here you go, Strouty, sans crotch....
Scored this on eBay for a good deal. I haven't needed them yet, but figure they will come in handy with a German car:
Scored this on eBay for a good deal. I haven't needed them yet, but figure they will come in handy with a German car:
TK-421
Well-known member
The Fuel items are a 3/8" Impact Wrench, 1/4" Impact Driver and a 1/2" Hammer Drill/Driver, with those three purchases I got a free 3/8" Ratchet, a free stick light and a free 4 amp hour battery, all told it cost me $547 with no tax or shipping. It was quick shipping too, I ordered it on the 3rd and it got here today. Could've been faster though, seeing as how it got here at 1:49am on the 5th, but UPS can't be bothered to deliver stuff on Saturday, so I had to wait until Monday.
The buy a tool get something free deal should still be going on until the end of this month, and I used cpomilwaukee.com and don't have any complaints, other than the fact that they used UPS whereas USPS would've gotten it to me on Saturday instead of Monday, but using UPS is fairly typical for tool shipments it seems.
TK-421
Well-known member
Honestly, I'm more of a green guy, but Christmas is my favorite time of year, so I think green and red will go together well. Plus, I much prefer red instead of blue or yellow. Wouldn't mind Ryobi's green, but Milwaukee has been calling to me since I was a kid, so I figured what the hey.
Haven't tried anything out just yet, need to get impact sockets before I use the impact wrench, don't really have anything to drill right now, and need bits for the impact driver. I mainly got them right this instant because the deal was too good to pass up, if not for the deal I would've waited until it was closer to school time come the end of May. I got them for my automotive classes, and wrenching at home once I figure out what I'm doing.
However, with my CEL coming on and throwing a code about my throttle body, I was going to see if I can't figure out how to get that off and get it cleaned tonight, I'll use the ratchet and stick light for that, and then come thursday I'll see about using the ratchet again to replace a gasket that seems to have failed and is causing an oil leak. Just need to see what my HOA says about wrenching in the driveway, since right now my garage is too cluttered. So hopefully soon I'll get to play around with them.
TK-421
Well-known member
The power ratchet is so nice, so much better than turning one by hand, don't think I'll ever go back to using a regular one if the power one will fit. Granted, I'm still new to all this, so maybe with time I'll figure out tricks for the regular one, or learn that power ones aren't so nice as they are at first glance, but right this second I love it, and I'll be getting the 1/4" version eventually.
OCD
Well-known member
I was just going to pick up this,
and this, that's it...
But noooo, had to see this on promo, and technically it was on my future to get list... 
and this, that's it...
But noooo, had to see this on promo, and technically it was on my future to get list...
FOCUS.FREAK
Well-known member
That's were they always get ya! ^
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
OCD
Well-known member
MattVette89
Well-known member
bmwpowere36m3
Well-known member
- Joined
- Nov 8, 2012
- Messages
- 1,125
Its not about if he does or doesn't. Its a tool, and if you don't own one.. you probably should!
