Lots of stuff ... no reasonable offer or trade is refused!

[Stick Figure]

EDITED Again to remove some sold items


EDITED to add prices per forum rules.... all prices are or best offer, and all prices include shipping in the continental US. I will of course offer deals on multiple items, just post or PM what you are looking at and we can go from there. I was hoping to not have to try and price the stuff out individually since i would guess that most people would want more than a single wrench or screwdriver, but whatever ... on to the original post:


So as some of you know from my first post on here a couple weeks back i bought out a guys tool collection. Some of this stuff i don't have a use for right now, and some of this stuff i will probably never have a use for. About 90% of the work i do is in metric, in fact outside of fittings i rarely need an SAE or fractional wrench, so any trades for metric stuff would probably be worth it to me. Anyway here we go w/ the pics and descriptions.

Snap On 3/8" Torque adapter FRES12

$18.26 obo

MAC 5/8" torque adapter

$18.25 obo since we all know mac could never be worth as much as snap on! lol

3/4 -- 7/8 12 point Urrea brand

5/8 -- 11/16 12 point Urrea brand

1/2 -- 7/16 6 point JA Sexauer brand

7/16 -- 3/8 12 point Urrea brand

1/5 -- 5/16 12 point Craftsman

1/4 -- 5/16 12 point Urrea brand

$7.50 each obo?

Craftsman Stud removal tool

pending payment

Ridgid brand Pipe Cutter & Wrenches

$149 obo?

Misc Hammers ..... $5.50 each OBO?

Artisan:

3/4"

11/16"

5/8"

9/16"

$15 OBO?

Williams:

SOLD

SOLD

Urrea:

13mm

3/8"

$7 each

Proto:

3/8

$7 each

Alltrade:

13mm

$7

Lectrolight:

1/2"

$7 OBO

Proto:

3/8" QTY 2

$7

Craftsman:
SOLD


Snap-on:

7/16" x 7/16" flare nut
$7

1" Thorsen $7

1" williams SOLD

Set Includes:

7/16X 1/2 IN HALF MOON WRENCH

9/16X 5/8 IN HALF MOON WRENCH

5/8X 3/4 IN HALF MOON WRENCH

11/16X 13/16 HALF MOON WREN

7/8X 15/16 HALF MOON WRENCH

I also have a set of Snap On Half moon wrenches that can be seen here:

obviously they are dirty in the pic, and have more ware on them than the Matco. I will be keeping one pair, and selling the other, doesn't matter to me which i keep and which i sell.
SEE BELOW FOR BETTER PIC!

$100 for either set OBO

Piston ring installer tool

Pending Payment

$7 each OBO

Proto Brand Inside snap ring pliers w/ tips

$10

Set is similar to Stock#: 307SUY that sells for $481.35

This set is made up of 1/2" drive:

SUD18 -- 9/16 12point

SUD20 -- 5/8 12point

SUD22 -- 11/16 12point

SUD24 -- 3/4 12point

SUD26 -- 13/16 12point

SUD28 -- 7/8 12point

i have an extra 9/16 and 7/8 for this as well if anyone needs individuals.

$150 obo

Snap-On 10° Offset Box Wrenches

Set of 4 wrenches includes:

11/16 -- 13/16

5/8 -- 3/4

9/16 -- 5/8

3/8 -- 7/16

$80 OBO

Snap-On 1/4 Drive SAE socket set

GSTM16 -- 1/2"

GSTM14 -- 7/16"

GSTM12 -- 3/8"

GSTM11 -- 11/32"

GATM7 -- 7/32"


$30 OBO

Snap on number FRS70A & LRS70

$35 OBO

Snap On Stock#: R1214A

$15 OBO


whew ..... thats it .... like i said open to offers and trades.

 

[crashbumper]

Are any of those socket drivers 3/8" or are they 1/4"?

 

[DragPack69]

Interested in the stud removal tool and the piston ring install tool
Please PM me prices w/shipping to 44057
Thanks,
John

 

[Stick Figure]

The Snap on "spinner ratchets" are 1/2" and 3/8" drive.

Also while i have them in my hand the armstrong spanner wrenches are:
0474 2-4 3/4"
0471A 3/4-2"

 

[Stick Figure]

DragPack69 PM sent

also forgot about:

all Proto Brand Snap ring pliers

 

[Underdog]

Interested in half moon wrenchs, Price? PM Me.

 

[Bull]

I don't have any snap ring pliers, so I'd be interested in what you have. Maybe you could give me two separate quotes, shipped to 01002. One for the Proto group in post #5 and then one for the Blue Point/Proto pieces in the main post.
How are the tips in the Proto set from post #5?

 

[tw33k2514]

pm sent on

Williams:

1/2" -7/16"

7/16" - 3/8"

1" combo

 

[Stick Figure]

better pics of the snap on half moons .....

^^^^^^^^Before cleaning ^^^^^^

^^^^^^^^ after a little jewelers rouge, and my buffing wheel only on the 7/8-15/16 of course^^^^^^



Bull:

Blue Points are spoken for, but i did snap some shots of the tips on all of the Proto stuff

glad i took this, i didn't realize it was missing two tips. I'm sure they are replaceable through a variety of quality places though.

 

[bry@n]

pm me a price on the half moon wrenches please>
Thanks.

 

[Stick Figure]

bry@n .. PM sent

Craftsman stud remover, piston ring installer, and Blue Point snap ring pair are all pending payment.

Someone find a how for that big pipe cutter and pipe wrenches .... i can't just let a good tool sit, and am scared what i'll get myself into w/ some plumbing tools of that size!

 

[vartz04]

please send me a price on the snap on double box end wrenches (the set of 4)

 

[Uncle Buck]

The Proto tray I would like!

 

[Stick Figure]

This item was sold

 

[Uncle Buck]

Interested in the 1/4" Craftsman nut driver handle if it is not spoken for yet. It is blue and clear colored.

 

[Stick Figure]

The Proto tray I would like!

i knew someone would want it ..... i can just never bring myself to throw things like this away, now i'm glad i didn't. PM replied BTW

 

[wyndycity]

PM sent on the Ridgid grouping

 

[nissan_crawler]

Price on:

Craftsman 3/8" impact set
Craftsman stud remover
Craftsman punch and chisel set
rigid pipe cutter (if wyndy doesn't get it, he beat me to it)
armstrong spanners
cam-lok ratchet wrench

shipped to 67217

 

[Hiball]

Pm sent on matco and or snap on obstruction wrenches.

 

[Stick Figure]

PM replied or sent, and the Williams wrenches, torque wrench, and blue point snap ring pliers have been paid for so they are gone.

Craftsman stud remover, piston ring installer, Proto Socket holder, and Craftsman 1/4 driver, are all pending payment.

 

[bmwpower]

Stick,
Please post prices. Forums rules.

 

[Stick Figure]

okay well i guess i have to go through and add some prices to keep up w/ the rules ....... prices will include shipping in the continental US, and of course since i'm really not sure what some of this is worth, or what kind of "package" deals people would want so everything is open to offers or trades

 

[Stick Figure]

adding one more thing before i go get my garage cleaned up .....

At first i couldn't find all of the parts, but i just found the last piece going through some more boxes, and thought this was kinda cool:

not really worth a lot as a functioning tool, might work better w/ newer batteries and a newer bulb. Still pretty cool though .... say $20 OBO? Otherwise i'll keep it and upgrade it w/ an LED! lol

 

[Joe Mamma]

I would like the 3/8 Craftsman combination wrench (as long as it is a =v= with no part number on the other side) and the Swagelok.

PM with offer being sent now.

Thanks Stick Figure.

Joe Mamma

 

[Stick Figure]

Update:

Paid for:

Williams wrenches
torque wrench
blue point snap ring pliers
Craftsman 3/8" impact set
Craftsman punch and chisel set
Armstrong spanners
Camlok ratchet wrench



Pending Payment:

Craftsman stud remover
piston ring installer
Proto Socket holder
Craftsman 1/4" driver

 

[Plombob]

The green handled ball pein hammer and the one that looks like a rock hammer - are they Plomb? If so, I'll take them.

 

[Stick Figure]

little one is a Stanley, the green handle one all i can make out is the warning wear safety goggles stamp, so who knows. I do know that i haven't come across anything else with that name, so i would guess it isn't. One of the ball peen is craftsman if anyone else cares.

 

[Plombob]

little one is a Stanley, the green handle one all i can make out is the warning wear safety goggles stamp, so who knows. I do know that i haven't come across anything else with that name, so i would guess it isn't. One of the ball peen is craftsman if anyone else cares.

The warning tells me its a Proto, so I'll pass on both. Thanks!

 

[Stick Figure]

The warning tells me its a Proto, so I'll pass on both. Thanks!

No problem ... worse case they end up in my 4Runner to be used for emergency "repairs" on a trail somewhere! lol


Update:

Paid for:

Williams wrenches -----------SHIPPED PM if you need tracking info
torque wrench -----------SHIPPED PM if you need tracking info
blue point snap ring pliers -----------SHIPPED PM if you need tracking info
Craftsman 3/8" impact set -----------SHIPPED PM if you need tracking info
Craftsman punch and chisel set -----------SHIPPED PM if you need tracking info
Armstrong spanners -----------SHIPPED PM if you need tracking info
Camlok ratchet wrench -----------SHIPPED PM if you need tracking info


and those that got the bubble packs, no laughing, they were at the dollar store!



Pending Payment:

Craftsman stud remover
piston ring installer
Proto Socket holder
Craftsman 1/4" driver


Everything still listed is of course open to offers or trades: Best trades for me would be Tool storage, metric ratchet wrenches, lower wat soldering iron/station for circuit board use..... i'm know there is a lot more that i need and just don't know yet.

 

[Stick Figure]

Uncle Buck i received your envelope today, so things will be dropped at the post office on monday. This would be a great time to drop off over things if anyone else is interested! Hint hint nudge nudge!

 

[Uncle Buck]

Uncle Buck i received your envelope today, so things will be dropped at the post office on monday. This would be a great time to drop off over things if anyone else is interested! Hint hint nudge nudge!

You showed two Snap-on ratchet spinners in one of your postings, I believe $30 for both, would you separate these? I am interested in the one that is a 3/8" size.

BTW: Till we get this hammered out, do not ship the other stuff.

 

[Stick Figure]

i might be willing .... right now the snap on stuff is with my snap on guy though. It will be tues before i can get it back in my hands. Can you wait until then? i need to see if he had any interest in any of the tools.

 

[Uncle Buck]

i might be willing .... right now the snap on stuff is with my snap on guy though. It will be tues before i can get it back in my hands. Can you wait until then? i need to see if he had any interest in any of the tools.

Just let me know, thanks.

 

[speed bump]

What size pipe wrenches are those?

 

[Stick Figure]

Pipe wrenches: Smallest opens to about 1.5" middle, 2" and the 18" opens up to 3"


Received payment today on the Piston ring tool, and the stud remover. These will ship out probably wed, thurs at the latest.

 

[jh_m5]

Are the thumb drivers 3/8" ?

 

[Stick Figure]

one is 1/2, one is 3/8, but the 3/8 may be spoken for. I need to call tomorrow and find out what happened to my snap on guy today, he currently has all of my snap for sale items.

 

[midnightcruise]

Are the half moon wrenches still for sale?

 

[Stick Figure]

Very old thread, they have been sold a long time ago along with most everything listed.