Show your new tool arrivals

[NUTTSGT]

Spotted the Cman 16 oz ball peins on sale for $9.99 so I decided to grab another for a different tool box. While I was there, they had a box of Cman Professional screwdrivers for $2.99 each (USA) any size. So I grabbed a long phillips, must be a 15" blade, and a narrow straight blade. Total spent was about 17 bucks and I put it on the Sears card after the wife ordered some stuff. She'll pay the bill and not even realize she's paying for mine too.




You might also notice the new to me NOS bottle, pretty much full, given to me by a friend.

 

[OCD]

Going to try out the Blue Point disc sander,

More picks,

 

[davethorik]

Today's haul from Lowe's...4 discounted USA made Kobalt demo screwdrivers were around $12, Vaughan Super Bar another $12...

 

[cashishift]

I have been wanting a new soldering iron for a while and could not resist this NOS Weller from HJE. Also picked up a couple more VG's including the elusive 7CR and a 10WR... once the 10CR arrives, the wall rack is complete.

Where did you find the rack? I'd love to have one of those.

Good call on the soldering iron, going to check it out now.

 

[DSM_PWR]

I bought those Kobalt screwdrivers a few weeks back. Really like them so far.

 

[Notorious BRT]

Damn.

I need that in my life. After my Epstein's Vise-Grip haul, I have several Petersen made pairs.

 

[drewvdw]

I finally got some angle wrenches I've been needing for a while. Got the full standard set up to 2" metric sooner or later, whenever the price is right on Amazon.

 

[48548]

Just got the two on the right.

 

[rshadd]

Damn.

It's like you read my mind...

 

[Dookie2122]

I finally got some angle wrenches I've been needing for a while. Got the full standard set up to 2" metric sooner or later, whenever the price is right on Amazon.

I've seen those drawer dividers here often, can you give me any info on them, manufacturer / source / review...thanks in advance for any help.

 

[bmwpowere36m3]

I think their standard on lista boxes...

 

[Tenex]

I've seen those drawer dividers here often, can you give me any info on them, manufacturer / source / review...thanks in advance for any help.

Those dividers are specific to Lista toolboxes. However, Ernst makes their own version that are a trim-to-fit style.

 

[jmill97]

Not bad for the last 2 weeks

 

[drewvdw]

I've seen those drawer dividers here often, can you give me any info on them, manufacturer / source / review...thanks in advance for any help.

I think their standard on lista boxes...

Those dividers are specific to Lista toolboxes. However, Ernst makes their own version that are a trim-to-fit style.

Nope, not Lista, Stor-Loc. Comes standard with the box, which I love.

 

[dutchgray]

View media item 59217Got two larger sizes of Facom 440 wrenches, 26 & 28mm and a 1/2" ratchet.

 

[Xmoonstompx]

Sent from my LG-H901 using Tapatalk

 

[rshadd]

Dykem BRITE-MARK Medium Tip Paint Markers

 

[Xmoonstompx]

Sent from my LG-H901 using Tapatalk

 

[Soslow]

Sent from my LG-H901 using Tapatalk

If you don't mind me asking, how much was the rotor gauge?

 

[Xmoonstompx]

If you don't mind me asking, how much was the rotor gauge?

$44 from Amazon.

Sent from my LG-H901 using Tapatalk

 

[davethorik]

Just went to Home Depot today picked up this Klein 11-in-1 screwdriver as well as this BOGO pack of Empire 9" torpedo levels, which was the regular price of just 1 ($10).

Also picked up a set of Lufkin center punches, but they're old

 

[mike528]

 

[cesski]

My haul for the week. Proto 1/4" and 3/8" drive ratchet and SAE socket sets from eBay, a bunch of cheapo cutters/pliers from Lowe's and Menard's, cheapo Husky precision screwdrivers from Home Depot. Not in picture, Knipex 10" Cobra from eBay.

Still looking for a good deal on WrightGrip, Proto ASD wrenches or any other brand that offers FD+ or similar technology.





Sent from my VS986 using Tapatalk

 

[Strouty]

What are those things in the upper left corner???? Are they some sort of turkey stuffers?

 

[koosh]

I'm one of the fortunate ones who works for a company who supply us with tools, we don't have a set budget but we get 99% of our tools from an online store called RS components! We just have to send what we want to our superiors and they decide if we need them or not (and we don't take advantage so we normally get what we want!)

Today these arrived for me after my supervisor saying he didn't order them last week!

 

[NUTTSGT]

What are those things in the upper left corner???? Are they some sort of turkey stuffers?

I was wondering the same thing but I thought they were some type of cheese samplers. . . . my cheese ...nacho cheese.

 

[FOCUS.FREAK]

Astro model number 40SL.

Saw it on South main auto via YouTube. It's supper bright. I'm sure it helpful when you loose something because for one you will find it, and two you'll be blinded all at the same time.


Sent from my iPhone using Tapatalk

 

[Strouty]

I was wondering the same thing but I thought they were some type of cheese samplers. . . . my cheese ...nacho cheese.

No fair, you can edit my posts, but I can't edit yours!

 

[PelicanPines]

I was wondering the same thing but I thought they were some type of cheese samplers. . . . my cheese ...nacho cheese.

I'm also wondering... self check skin biopsy tool... for the guy that needs every freaking tool there is...???

 

[mike528]

Thexton wire insertion tool.
http://www.thexton.com/mobile/wire-insertion-tool-combination-mpr-64.html?redirectCancelled=true

 

[thegroundpounder99]

I finally got some angle wrenches I've been needing for a while. Got the full standard set up to 2" metric sooner or later, whenever the price is right on Amazon.

How is the quality of these? I like Sunex Impact sockets but haven't seen many wrenches from them.


Sent from my iPad using Tapatalk

 

[mark.dziamski]

New tools over the last couple weeks
Blue point 24" chain wrench

1/2" drive cordless CP 20V

Snap On tap & die set

Pneumatic 2" mini grinder

Got this just because. 1/2" drive on one side and 3/8" on the other and a hammer.

Large thread chaser

Harbor freight brass hammer


Sent from my XT1254 using Tapatalk

 

[cliftonbros89]

Dykem BRITE-MARK Medium Tip Paint Markers

Do these have a problem with the tips drying up? Majority of paint markers I've got tend to dry up making them useless.

 

[mark.dziamski]

Do these have a problem with the tips drying up? Majority of paint markers I've got tend to dry up making them useless.

I use this same brand and they don't dry up on me. But others have

Sent from my XT1254 using Tapatalk

 

[four.cycle]

Do these have a problem with the tips drying up? Majority of paint markers I've got tend to dry up making them useless.

store them standing up tip down.

 

[LowCapacity]

I bought a green one on Craigslist 2 years ago and ended up selling it for what I bought it for because I never used it. I found myself more comfortable and using a piece of rubber mat more often. A creeper just puts you too high off the ground and limits your clearance
You may have it for a better application than me tho


Sent from my iPhone using Tapatalk

Agreed, I just lay on big pieces of cardboard.


Sent from my iPhone using Tapatalk

 

[Strouty]

Got this just because. 1/2" drive on one side and 3/8" on the other and a hammer.

So who makes that? PN?

 

[hautpot]

and you can use that hammer ratchet for aligning hole with the tapered end.

 

[Rossco]

I'm one of the fortunate ones who works for a company who supply us with tools, we don't have a set budget but we get 99% of our tools from an online store called RS components! We just have to send what we want to our superiors and they decide if we need them or not (and we don't take advantage so we normally get what we want!)

Today these arrived for me after my supervisor saying he didn't order them last week!

Nice. Real nice.

Yeah I love the RS catalogue, Been a while. We get 100% for lost / stolen / broken & 60% new purchase. Might search for a set like that

 

[mark.dziamski]

So who makes that? PN?

I wish I knew, no name or numbers or stamps of any kind. I got it for $10 at a tractor supply store

Sent from my XT1254 using Tapatalk