Found a deal on craigslist? - List Here!

[macgee]

Man, if only I was about 20 hours closer!

Dave

Just call him and see if he'll take PayPal.

 

[catalytic]

Plvmb Pulley Puller Set 6 + Extra Stuff + American Made - $150 (Chatsworth, CA)

For you Plumb collectors.

"I used to use these pullers for both Automotive and Air Conditioning applications, but not any more. There are at least six pullers and an extra puller (without jaws) that matches the jaws on one of the boxed sets. Some pullers use jaws and some require your own "pull bolts" for your particular length and thread applications. The 3 big items on the right side of the picture, sorry, I don't know what they are really called, but we used to call them pulley grippers or wedges. Very handy for pulleys with messed up pull holes or without any pull holes at all. This stuff is all American made like Proto or Plomb. If you have been looking to buy some of these new, you know you could spend much more for just a single puller set. Take 'em away!"

http://losangeles.craigslist.org/sfv/tls/5570992657.html

^^ I have more than $150 into collecting just the full set + box of 10-ton Plvmb model 4011. I'll be shocked if this lasts the day...someone go grab it. If you restore or work on machine tools, this is basically about the best setup you can have. Macgee strikes again another killer find...

 

[Plombob]

Here are some Plomb wrenches and a screwdriver. It's in Yucaipa, CA. If I was closer, I'd go get it. That plastic screwdriver handle is in amazing shape.

https://inlandempire.craigslist.org/tls/5565188357.html

 

[whateg01]

Blackhawk S-17 in KC. Maybe not a real steal, but it is a working vintage jack so it's worth something.

https://kansascity.craigslist.org/tls/5552046650.html

https://images.craigslist.org/00E0E_2T2LSeweeWD_1200x900.jpg

 

[dhammond]

http://quadcities.craigslist.org/tls/5574274857.html
http://quadcities.craigslist.org/tls/5560780742.html
Seller has a ton of other items up for sale, Unisaw, Etc Coal Valley

 

[dhammond]

https://quadcities.craigslist.org/gms/5574271831.html

 

[macgee]

Vintage Delta Unisaw with Router/shaper wing and vintage wood vise all for $100 (Rancho Cucamonga, CA)

It will need work, total restore but you will not see one for cheaper. The shaper wing could possibly make for a nice router wing and I like the Morgan Vise that is included. Seller's phone number is listed in reply section.

http://losangeles.craigslist.org/sgv/tls/5575810571.html

 

[jeepinerdeep]

CENTRAL PA- LANCASTER

45" WIDE VIDMAR- $475

https://lancaster.craigslist.org/tls/5569203014.html

 

[84scrambler]

https://sfbay.craigslist.org/sby/tls/5576738299.html

Good price on some rigid cutters and bench vise

https://sfbay.craigslist.org/sby/tls/5576738299.html

This might be a descent deal depending on those crimpers, has some imperial in there, stanley and craftsman..

 

[aosty]

Plvmb Pulley Puller Set 6 + Extra Stuff + American Made - $150 (Chatsworth, CA)

For you Plumb collectors.

Thanks macgee!!
The seller was very friendly and found an additional box of goodies! All USA... mostly Plomb and Proto...

 

[Shiftless]

aosty:

SCORE!

 

[macgee]

Thanks macgee!!
The seller was very friendly and found an additional box of goodies! All USA... mostly Plomb and Proto...

Awesome, glad I was able to help.

 

[macgee]

Metal tool cabinet/Blueprint Drawers - $100 (REDONDO BEACH, CA)

Not a bad price for both. The two drawer box looks much bigger than the typical file cabinet drawers, same width as blueprint cabinet.

"Metal cabinet with 7 drawers that have liners in 4 and dividers in large drawers.The 2 pieces stack on top of each other and the drawers have roller slides.I used it as tool storage in my garage but I think its was made for blueprints?The last pic is liner in drawer. Good shape its 43" wide,32" deep and 32" tall total. $100 obo text "

http://losangeles.craigslist.org/wst/tls/5579610273.html

 

[aosty]

Giving back... another collection of Proto puller stuff... $200. Seller also has a big Snap-On set.
http://losangeles.craigslist.org/lgb/tls/5573953821.html
In Menifee in IE/SoCal...

 

[whateg01]

Not sure if this is really a deal yet, but the seller just lowered the price from $175. Maybe it'll drop a little more until it becomes a good deal. Tulsa area.

Walker 784 floor jack - $125 (Tulsa, Ok)
https://tulsa.craigslist.org/tls/5567795416.html

Dave

 

[Cman101]

So it's official then. There is a nutjob on craigslist, not the first by any means, but whose particular hobby is re-posting other drill press listings.

Heads up, the CL drill press nut case is still on the loose. Same drill press for sale now in Chico. That drill press gets around, third city now that I have seen it posted in. Seller also has another listing in Chico for a newer Sears, $199. I recognize the same garage door behind the drill press.

https://chico.craigslist.org/tls/5575505751.html
https://chico.craigslist.org/tls/5574701056.html

 

[84scrambler]

Not sure if this is really a deal yet, but the seller just lowered the price from $175. Maybe it'll drop a little more until it becomes a good deal. Tulsa area.

Walker 784 floor jack - $125 (Tulsa, Ok)
https://tulsa.craigslist.org/tls/5567795416.html

Dave

Dave,
I picked up my 4 ton blackhawk (S4) for a little less then $100 and everything worked minus the light. I also picked up a walker just like that for around $40 but the cylinder needs rebuilding. Ran across another walker a couple of years ago at a flea market that also needed to be rebuilt and the guy was also asking $40.

 

[whateg01]

Dave,
I picked up my 4 ton blackhawk (S4) for a little less then $100 and everything worked minus the light. I also picked up a walker just like that for around $40 but the cylinder needs rebuilding. Ran across another walker a couple of years ago at a flea market that also needed to be rebuilt and the guy was also asking $40.

I bought my Walker 4T 884 for $100. Seller said it didn't work, but it turns out that was because it had no oil. My S4 was purchased for $70. It's not in the best of shape, but it does work fine. There was another S4 listed in Tulsa for $200 recently. It's not listed anymore, so I don't know how much the buyer paid, but hopefully nowhere near that. Lots of jacks on the Tulsa CL that are way overpriced - this one included. Hopefully it comes down some more.

Dave

 

[930dreamer]

Hxxw 4/0 Aluminum Wire - 600' Spool - $225

http://albuquerque.craigslist.org/tls/5580295620.html

 

[Shiftless]

Delta band saw for $20 in Marin County, CA.

http://sfbay.craigslist.org/nby/tls/5581636336.html

 

[Shiftless]

Babco vise in Sonoma county CA. $30
Older bench vise 4 inch jaws.
Marked Oakland...possibly made in Oakland, CA some were made in Japan, others elsewhere.
Good quality especially for this price!

http://sfbay.craigslist.org/nby/tls/5581252617.html

 

[Plombob]

Thanks macgee!!
The seller was very friendly and found an additional box of goodies! All USA... mostly Plomb and Proto...

Glad to see this one went to one of the members. I was tempted, but decided to pass. I hardly ever use a puller.

 

[PSYKO_Inc]

SF Bay Area - Homecraft drill press, Atlas/Clausing horizontal bandsaw, $150/ea. Looks like a smoking deal to me.

http://sfbay.craigslist.org/sby/tls/5580334173.html

 

[macgee]

Craftsman Block Grinder with orig. Craftsman Stand - $40 (Redondo beach)

Has lamp, tools rests and cool eye shields. Missing end covers but the craftsman pedestal is very desirable when it's in stock black.


"Craftsman industrial rated 1/3 hp grinder and close ball bearing split phase motor with pedestal.
Excellent grinder made in USA comes with Sears 3 foot tall pedestal light added glass shatter proof guards brand-new grinding will wire brush smooth operator excellent piece of equipment myself $40 firm"

http://losangeles.craigslist.org/wst/tls/5584513803.html

 

[Joes89yj]

Here's a Taco box outside of STL for $300 obo

https://stlouis.craigslist.org/tls/5584394315.html

 

[larryq]

This one's not half-bad. A 10 drawer powr-kraft / remline box for $100 in Castro Valley CA. (Note that the missing drawer handle on the second to last drawer is included, easy to reattach.)


http://sfbay.craigslist.org/eby/tls/5585241448.html

 

[bubinga]

Yes, I would buy that power craft, looks like a nice box.

Sent from my MotoG3 using Tapatalk

 

[larryq]

Two big air compressors for sale in Santa Clara CA. $50 each, at least one was in working condition last they knew. They appear to be 120 gal DeVilbiss ones. Not mint condition, but hey, $50.

http://sfbay.craigslist.org/sby/tls/5584582762.html

 

[sld961]

Two big air compressors for sale in Santa Clara CA. $50 each, at least one was in working condition last they knew. They appear to be 120 gal DeVilbiss ones. Not mint condition, but hey, $50.

http://sfbay.craigslist.org/sby/tls/5584582762.html

Wow, that's a lot of compressor for $50, even if they don't work. I'd be all over those if they were local.

Now my contribution doesn't seem like much of a deal, but I'll post it anyways.

3phase 1HP bench grinder - $60
http://williamsport.craigslist.org/hvo/5587364221.html

 

[macgee]

14" (Rikon) Craftsman Bandsaw - $50 (Los Alamitos, CA)

These have two speeds and he has a bunch of new custom blades for it. It's only for $50.

"Up for sale is a used Craftsman Bandsaw. Excellent condition. I'm only selling because I needed something bigger to handle projects around my shop. It is now currently in my way and I need it gone ASAP. Will deliver for an extra $20 within 15 miles."


http://losangeles.craigslist.org/lgb/tls/5593516911.html

 

[bubinga]

real good deal on the bansaw.

 

[larryq]

A fellow in Lafayette / Orinda, CA is selling four NOS 2 HP, 3450 RPM, single phase 220v Doerr motors for $25 each.

I purchased a Baldor polisher from him (used but in great shape, also $25) and wished I could get one of these too but I don't have 220v, and more to the point I don't need a 2 HP motor at the moment. But the seller is a good guy and the motors are legit. (If you get in touch tell him Larry sent you.)

http://sfbay.craigslist.org/eby/tls/5591713214.html

 

[larryq]

Here's an Equipto cabinet for $45 on the Peninsula in the SF Bay Area. For those who don't know the brand, Equipto is a respected USA manufacturer. I have one of these and they can hold a lot of odds and ends, bolts and such and are quite sturdy.

http://sfbay.craigslist.org/pen/tls/5590123663.html

 

[macgee]

Nice finds Larry.

 

[KLO101489]

Larry - next time you run across a $25 Baldor let me know!

 

[bubinga]

Great Compressor motor, or table saw motor, adapt it to a contractors saw, or cabinet saw.

Sent from my MotoG3 using Tapatalk

 

[catalytic]

I believe those Doerr motors are TENV (totally enclosed non-ventilated) judging by the wire access plate on the back (this is standard only on TENV motors -- on TEFC the fan guard is here). TENV is a much more expensive motor than standard TEFC due to a lot more insulation in them. I have one on my metal grinding disc grinder and also on dust collectors.

Please someone go get them and put them to work!

A fellow in Lafayette / Orinda, CA is selling four NOS 2 HP, 3450 RPM, single phase 220v Doerr motors for $25 each.

I purchased a Baldor polisher from him (used but in great shape, also $25) and wished I could get one of these too but I don't have 220v, and more to the point I don't need a 2 HP motor at the moment. But the seller is a good guy and the motors are legit. (If you get in touch tell him Larry sent you.)

http://sfbay.craigslist.org/eby/tls/5591713214.html

 

[bubinga]

I'd be all over that motor, I know what else its good for, a jointer.
a big jointer.

 

[67King]

Unfortunately, he is not willing to ship the motors. I tried to buy 2, but he doesn't have the time to find boxes. Hoping that may change. Could upgrade my bandsaw, and I think my mill is a lower power one, but I haven't had a chance to look).

 

[whateg01]

Maybe there's somebody here who one could trust to buy and ship them for you on your behalf?