I really like my Husky ratcheting screwdriver

[bfm336]

A part of me cringes ever so slightly owning it, as I have been diligent in only trying to by USA hand tools when possible.

That said, I picked this up on clearance a while back for $5 for use in my gun cleaning kit, it has hollow ground flats and I wanted that. Tonight I had to use it to remove screws from an antique bathroom mirror and I wanted to use those bits.

I will say, the ratcheting mechanism is so smooth with very little backdrag that it made the task a pleasure.

For me I store my most common used bits in the handle of the driver (I think it holds 8-12) and I like the weight it adds - though some may not like the rattle.

Overall I just thought I'd share - if someone can't put out for the SO version and needs something quick, I'm pretty sure HD still carries these.


Sent from my iPhone using Tapatalk

 

[Cato]

Yeah, it just goes to prove you don't have to pay an arm and leg to get a good tool.

I really like Husky hand tools - especially their ratchets and sockets.

 

[Ponchoguy]

A part of me cringes ever so slightly owning it, as I have been diligent in only trying to by USA hand tools when possible.

That said, I picked this up on clearance a while back for $5 for use in my gun cleaning kit, it has hollow ground flats and I wanted that. Tonight I had to use it to remove screws from an antique bathroom mirror and I wanted to use those bits.

I will say, the ratcheting mechanism is so smooth with very little backdrag that it made the task a pleasure.

For me I store my most common used bits in the handle of the driver (I think it holds 8-12) and I like the weight it adds - though some may not like the rattle.

Overall I just thought I'd share - if someone can't put out for the SO version and needs something quick, I'm pretty sure HD still carries these.


Sent from my iPhone using Tapatalk

I have the Cman version and I thought it too was made in the US until I took a good look at it---Taiwan. I do like it though, it makes fast work of fasteners....

 

[radrush]

I have the Cman version and I thought it too was made in the US until I took a good look at it---Taiwan. I do like it though, it makes fast work of fasteners....

I have one of these...

 

[Ponchoguy]

I have one of these...

That's the one I have....

 

[Jeremy77]

I like a good U.S. made tool as much as anyone but for the price, especially when on discount, the Husky line is a decent tool that can be had at a good bargain. Around Christmas time, I picked up both the SAE and MM sets of flex ratcheting wrenches for $14.99 each. At 3 bucks a wrench, it's hard to beat. I've not been especially gentle on them and have yet to have one slip much less break.

 

[gdocktor3]

Dude I was thinking the same thing the other day. I am really impressed by this thing. I warrantied an old one and was given this a few months ago. It's really smooth. It even sounds good. I like the hollow handle as well.

 

[thegroundpounder99]

I try to buy US too but hard to pass on good ratcheting screwdriver for $5. Some of Husky's offerings are good and when on clearance I pick up some stuff for home.


Sent from my iPad using Tapatalk

 

[Brownsfan]

I picked up the Husky on clearance for $5. Best $5 I ever spent. It's in my on site tool set. Doesn't hurt as much to loose a $5 tool as opposed to a $50 snap on version. That one lives in the shop box.

 

[HomeTheaterMan]

How is the quality of the bits? Anyone compared those to the Snap On bits?

 

[lightning02]

anyone has the idem number on the Husky screwdriver? im going to pick up one.

 

[Tribalvision]

Husky Model # 236360100 Internet # 204364629 Store SKU # 1000021816

http://www.homedepot.com/p/Husky-Ratcheting-Screwdriver-Set-10-Piece-236360100/204364629


$10 at my store currently

 

[lightning02]

Thanks

 

[Brownsfan]

Even at $10 it's worth it. I would have bought it at $10. When I saw it at $5 I jumped on it

 

[bensminibikes]

I have the stubby one. It works great

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[gdocktor3]

How is the quality of the bits? Anyone compared those to the Snap On bits?

They're good enough. There's also more than enough to go around so if you use the correct bit you should be fine. The only snap on "bits" I have are fixed on 4 screwdrivers so I can't compare, but haven't had a problem yet. With that said, a ratcheting screwdriver really shouldn't be used to break tight, rusted screw free anyways. It's more of a speedy assembly/dissembly tool.

 

[hoye0017]

See... this is what this forum is good for. I've been wanting to replace an old craftsman ratcheting with handle storage for awhile. I couldn't bring myself to pay for an SO yet because it sees less use now than before.

I'm gonna take this recommendation and try this thing for $10.

Thank you OP.

I just hope this doesn't devolve into the standard USA vs Taiwan argument. Please... If you have any commentary on that subject take it to one of the other 1000 threads about it.

 

[ADSR]

For 25 bucks you can have a snap on made in USA one.

http://www.toolsdelivered.com/Williams-WRS-1-Hand-Tools-Screwdrivers-Bit-Drivers

 

[Milwookie]

For $200 you can get a solid titanium one made by Polynesian virgins.

Why the constant need to tell people they should buy more expensive tools? He spent $5 on a Husky screwdriver and it works fine and he likes it. Not everyone needs the most expensive tools you can buy. Yes, Wera is great (I own a few), and sure Snap-On is what professionals use, but the constant and immediate dissatisfaction with something because it's made in China or Taiwan gets a bit old.

 

[skunkape1]

Exactly Chewy. There should be no shame in owning Taiwan made tools. Number 1-they can be top quality and usually are. Number 2-they're moving in the right direction as far as democracy, freedoms, civil rights, etc.

 

[Fedwrench]

You shouldn't feel bad using a tool that you like using

Taiwan produces some really nice tools. No shame is necessary. Hell, the fasteners holding the Chinese made auto parts I replace don't know where the tools I use come from

 

[panknuckshovel]

For $200 you can get a solid titanium one made by Polynesian virgins.

Why the constant need to tell people they should buy more expensive tools? He spent $5 on a Husky screwdriver and it works fine and he likes it. Not everyone needs the most expensive tools you can buy. Yes, Wera is great (I own a few), and sure Snap-On is what professionals use, but the constant and immediate dissatisfaction with something because it's made in China or Taiwan gets a bit old.

Link please!!!!

 

[hoye0017]

Jesus. I tried to stop them but maybe that's what feeds em...

This forum is overrun by trolls.

 

[Moose-LandTran]

I picked this up on clearance a while back for $5. I will say, the ratcheting mechanism is so smooth with very little backdrag that it made the task a pleasure.

Sometimes you just find a tool that works perfectly and does exactly what you need, without having to spend over the odds.

A good tool is not neccessarily expensive, and an expensive tool is not neccessarily good.

 

[Milwookie]

Sorry, I didn't see your post before. I didn't mean to contribute to the problem.

There's should be a new sub forum for Asian Tools where it's forbidden to talk about anything not made in China, Taiwan, etc. There are clearly good tools out there. GearWrench is made in Taiwan, and highly recommended. Maybe having a forum where people can discuss the merits of cheaper tools would get people to be a bit less critical.

 

[gdocktor3]

Used mine today to remove taillight lens on my trailer. It's a cheap multi tool that works great and fits in the door pocket of my truck. I also keep a 3/8" socket adapter in my truck socket set to use with it.

 

[ADSR]

For $200 you can get a solid titanium one made by Polynesian virgins.

Why the constant need to tell people they should buy more expensive tools? He spent $5 on a Husky screwdriver and it works fine and he likes it. Not everyone needs the most expensive tools you can buy. Yes, Wera is great (I own a few), and sure Snap-On is what professionals use, but the constant and immediate dissatisfaction with something because it's made in China or Taiwan gets a bit old.

I posted because OP made reference to SO in his post. And yes, The SO ratcheting driver at the 70 mark is costly. But The Williams SO driver at the 25 mark is is excellent value. I have import drivers as well, and they're not bad, but they're not good compared to the Williams.

 

[ADSR]

Jesus. I tried to stop them but maybe that's what feeds em...

This forum is overrun by trolls.

No kidding. 15 posts and they're trying to take over.

 

[decaf]

For $200 you can get a solid titanium one made by Polynesian virgins.

Why the constant need to tell people they should buy more expensive tools? He spent $5 on a Husky screwdriver and it works fine and he likes it. Not everyone needs the most expensive tools you can buy. Yes, Wera is great (I own a few), and sure Snap-On is what professionals use, but the constant and immediate dissatisfaction with something because it's made in China or Taiwan gets a bit old.

OMG...so sorry for that...you seem upset?

But let me just quickly answer that:
Why the constant need to tell people they should buy more expensive tools?
1. I haven´t told anyone to buy more expensive tools...

He spent $5 on a Husky screwdriver and it works fine and he likes it
2. I´m happy for him/her...

Not everyone needs the most expensive tools you can buy.
3. Absolutly not, haven´t said that...

but the constant and immediate dissatisfaction with something because it's made in China or Taiwan gets a bit old

4. I think this Wera one is made in Taiwan...so what is your point?
Many of Snap-on´s tools are made in China/Taiwan, and they are still good right?

Now i have removed my post so nobody feels criticized

 

[Fixed]

I bought a rolgear, with a silent ball and cam design. It's the smoothest "ratcheting" screwdriver I've ever used. Made in Canada, and cheap.

Sent from my SGH-I747M using Tapatalk

 

[Al Borland]

These are nice, and, the convenience of being able to walk in and buy it over the counter when needed is great as well. No waiting for a tool truck, or mail-order delivery. For 5-10 bucks, job done. If the tool gets lost, repeat the process, and it's only a few bucks, and a few minutes.

 

[gonmad54]

Picked one up today. At $10 I would recommend it. Feels pretty good in hand.


Sent from my iPhone using Tapatalk

 

[ADSR]

I bought a rolgear, with a silent ball and cam design. It's the smoothest "ratcheting" screwdriver I've ever used. Made in Canada, and cheap.

Sent from my SGH-I747M using Tapatalk

Thank you Sir. I'll buy that next time i'm out. I hope they make a stubby version

 

[ADSR]

wow! these look good. Sorry for the hijack.

http://www.rolgear.com/

 

[Fixed]

Thank you Sir. I'll buy that next time i'm out. I hope they make a stubby version

I haven't seen one yet, but that would be great.

Sent from my SGH-I747M using Tapatalk

 

[Bighead38]

A part of me cringes ever so slightly owning it, as I have been diligent in only trying to by USA hand tools when possible.

That said, I picked this up on clearance a while back for $5 for use in my gun cleaning kit, it has hollow ground flats and I wanted that. Tonight I had to use it to remove screws from an antique bathroom mirror and I wanted to use those bits.




Sent from my iPhone using Tapatalk

Hollow ground flats?

 

[radrush]

Hollow ground flats?

That's a flat blade which has been ground to create a characteristic concave, beveled edge.
.
.
.
.
.
.

 

[anndel]

I have 3 Snap On SSDMR4 one's 30 years old and still works great. I bought 2 last year during SO's Christmas sale.

 

[Bighead38]

That's a flat blade which has been ground to create a characteristic concave, beveled edge.
.
.
.
.
.
.

I've never heard of that. What are the benefits?

 

[Moose-LandTran]

I've never heard of that. What are the benefits?

Proper fit in slotted screws: