To avoid these ads, REGISTER NOW!

Chris's ongoing tool sale - check back regularly!

C

chrislehr

Well-known member
Joined
Apr 10, 2009
Messages
1,704
Location
Portland, OR
Can't seem to run out, so here are a few more.

Shipping on any of the smaller ones will be $5 USPS small box - the Barcalo will go actual weight in a flat padded envelope to keep it at $6 shipping.

...or buy the WHOLE LOT for $20 shipped (aka, free shipping if you take em all) Paypal today, shipped tomorrow.

1) Craftsman V series 19/32 and 11/16 $3 sold to wildman1
2) Craftsman VV series 5/8 and 3/4 $2
3) Cornwell CX-24 3/4 open ended/socket combination Sold to wildman1
4) Indestro "Forged Select" 0731B 13/16 and 7/8 $2
5) Bonney Bonaloy #2886 small 7/16 and 3/8 - 3/8th side was filed down to fit something. $1
6) Cresecent C1725 E date code 1/2 and 7/16 stamped with a large G on the 1/2 side $1
7) Barcalo Buffalo USA 13/16 and 7/8 offset box end $4


Click to enlarge!

​
 
Last edited:
To avoid these ads, REGISTER NOW!
W

wildman1

Well-known member
Joined
Aug 24, 2009
Messages
274
Location
Ohio, Good Ole USA
Re: Another Vintage USA wrench lot

"Craftsman V series 19/32 and 11/16 - Sold to wildman1
Cornwell CX-24 3/4 open ended/socket combination - Sold to wildman1"

Chris

I received both wrenches today, and they are exactly as described

Thanks! :beer:

George
 
OP
C

chrislehr

Well-known member
Joined
Apr 10, 2009
Messages
1,704
Location
Portland, OR
Re: Another Vintage USA wrench lot

bump - no interest in ANY? Taking offers as well. I have 3-4 more posts worth of stuff to add still, but not feeling the GJ love. Tell me what I'm missing!
 
B

Bolster

Well-known member
Joined
Jul 8, 2008
Messages
4,056
Location
Mexifornia
Re: Another Vintage USA wrench lot

chrislehr said:
bump - no interest in ANY? Taking offers as well. I have 3-4 more posts worth of stuff to add still, but not feeling the GJ love. Tell me what I'm missing!
Click to expand...

Not missing anything...every time I have posted odd assortments of vintage wrenches, I get LESS interest than you are getting! Even vintage Cornwell and Proto will just sit there with no interest. I can't explain it other than being "set-ism." Gotta be a set, or just the right wrench missing from someone's collection.

I will tell you that GJ non-response has really changed the way I buy used wrenches. Nowadays I just work on putting together sets, and I no longer buy wrenches just for the heck of it, thinking "someone will want it."

Anyway, you find me some nice pebble-field Proto Los Angeles combos and I'll be on them! Particularly that elusive 3/4"!!

I have NO idea why those MAC's haven't sold! :headscrat
 
B

bmwpower

Super Moderator
Staff member
Joined
Apr 24, 2005
Messages
12,578
Location
NJ
Re: Another Vintage USA wrench lot

I pm'd hours ago...i think.
 
C

crashbumper

Well-known member
Joined
Feb 8, 2009
Messages
602
Location
Gilbert, AZ
Re: Another Vintage USA wrench lot

I'll take these if still available:

Mac Wrenches - $3 each, cut you a deal, $12 for all

From top to bottom:

1) 9/16 combo, CL 18 USA, M boldt engraved on it
2) 10mm combo, E1 M10 CL, no markings
3) 5/8, C7, ISAC stamped on open end
4) 1/2 combo, Sabina, Ohio markings, slight surface rust, H boldt markings.
5) 1/2, 9/16 box end, BL 1618 , pat no 3466956, no markings

And a few Plomb Universal Sockets!

1) Plomb WF-75, 9/16" 3/8 drive - slight nick, loose wobble (pictured) $4
 
OP
C

chrislehr

Well-known member
Joined
Apr 10, 2009
Messages
1,704
Location
Portland, OR
Re: Another Vintage USA wrench lot

BMW PM'd on these Mac's - so they are SOLD pending payment
2) 10mm combo, E1 M10 CL, no markings
5) 1/2, 9/16 box end, BL 1618 , pat no 3466956, no markings

Crashbumper - everything you posted minus the above...

13 shipped?
 
OP
C

chrislehr

Well-known member
Joined
Apr 10, 2009
Messages
1,704
Location
Portland, OR
Re: Another Vintage USA wrench lot

Some Snap on and cman sockets, hexes, and other:

Snap On S6132A Honda Valve cover bolt $33 at Snap On - $10 SOLD to DeafAutoTech
Snap On 10mm hex 1/2 drive $23 at Snap on - $6
Husky 10mm hex 3/8 drive - $4
Snap On IMFM17 Shallow 3/8 6pt 17mm $10 at Snap On - $4
Snap On IMFM18 Shallow 3/8 6pt 18mm $11 at Snap On - $4
Plomb 5276 9/16 Universal 3/8 drive - $3
Craftsman 9mm 1/2 drive VV date - $4
Craftsman 13mm 1/4 drive G (or 9?) date code - this is an odd looking one - $2
Craftmsan 5mm 1/4 drive EE date code $1
Chrome Vandum 7/16 1/4 drive 6pt $1
Craftsman 4mm 1/4 drive EE date code $.5
Master Mechanic USA T1009 9/32 1/4 drive (free to anyone who wants and is buying something else)


(no pic unless anyone needs - all pieces in used but working shape)
Shipping not incl on those prices, contact me for final pricing on ANY items in this thread not marked.
 
Last edited:
To avoid these ads, REGISTER NOW!
OP
C

chrislehr

Well-known member
Joined
Apr 10, 2009
Messages
1,704
Location
Portland, OR
Vintage Snap on Blue Point wrenches

SO 3/4, 7/8 XV 2428 1949 $6
BluePoint 1/2 9/16 XD-1618 1954 $6
Snap On 11/16, 3/4 XDH-2224 1964 $6

​
 
Last edited:
OP
C

chrislehr

Well-known member
Joined
Apr 10, 2009
Messages
1,704
Location
Portland, OR
bmwpower, crashbumper, and deafautotech - all your stuff ships out tomorrow and is outside waiting for pickup!
 
OP
C

chrislehr

Well-known member
Joined
Apr 10, 2009
Messages
1,704
Location
Portland, OR
OK - the Snap On 1965 KRA-78 box and Torquometer 1/2" torque wrench.

Asking $65 + shipping on this item.

Works, not sure it's accurate, would calibrate if planning on using. Light works! :) The serial number was grinded off by a previous owner. The box itself is clean, and generally rust free. The tool itself is unmarked other than the grinding of the serial.

 
OP
C

chrislehr

Well-known member
Joined
Apr 10, 2009
Messages
1,704
Location
Portland, OR
Updated thread to remove most of the SOLD stuff. New listings below.

$1.50 per wrench unless noted otherwise!

20) VLchek 9/16 combination wrench - WC18A. Vlchek provided tools to many auto manufacturing plants in the USA in the eary 1900's - http://www.alloy-artifacts.com/vlchek-story.html Some age showing for sure, but no owner markings.
21) Challenger 9/16 combination wrench - Challenger was a subsidiary of Proto Tools, which was Plomb in the early years. No owner markings.
22) Thorsen USA 9/16 combination wrench - More Thorsen info here: http://alloy-artifacts.com/thorsen-manufacturing.html No owner markings.
23) "Vadimonium" wrench - this may be a German wrench - 8mm and 9mm "Special Ringspanner" is all that is on this wrench. $1
24) Another Vlchek open end wrench 9/16 and 1/2, but not marked. The only marking is the Vlchek "shield V" logo. Some wear and tear, no markings. $1
25) 9/16" tappet adjusting wrench - no make/model on this. No markings. $1


​

26) Blue Point Full polish open end wrench F-1618 1/2 and 9/16 - No owner markings - I think this is a fairly new piece.
27) Indestro 9/16 and 1/2" open end wrench Number P725B - "Drop Forged Select Steel" - Made in USA, "H" date code - No owner markings
28) Penncraft 3520 1/2 and 9/16" open end wrench. Pretty bad loss of chrome and rust on this one. $.50
29) Williams Made in USA Special 705 wrench. This is an old engineer's wrench - is a 13/16" wrench, and marked with "705 special" and a "T" on the reverse side. Finish is worn a bit, but still in really nice shape. No owner markings AT ALL. Based on the logo having the W diamond logo, this is 1924-1947 or so. http://www.alloy-artifacts.com/williams-supercompany.html $4
30) Upland Forge 11/16 combination wrench - no owner markings some usage markings from striking on the beam.


​

31) Penens 11/16 combination wrench - made in Chicago, IL, USA - marking of K.8.7 on the back (date code?) Penens was absorbed by Plomb in the 1940's, which later became Proto. More info here: http://www.alloy-artifacts.com/proto-empire.html#penens Some loss of finish, no additional owner markings. $2
32) Giller 9/16 combination wrench - made in Dallas, TX, USA - Giller tool was primarily a defense contractor. Tool is stamped Mfd U.S.A. 2018. Also has a date code on the open end of "4" No owner markings.
33) Snap On 9/16 obstruction or distributor wrench S-9832B - Made in USA - Stamped with a date code from 1964. Some loss of chrome around box end, no owner markings. $4 (sorry, late edit)
34) Unknown Open End 3/4 and 5/8 wrench - marked with "Drop Forged" and "Made in U.S.A." and a code of "7" on the reverse. This is a thin wrench, handy in tight spots. $6
35) Williams Made in USA Special 706 wrench. This is an old engineer's wrench - is a 1" wrench, and marked with "706 special" and a "T" on the reverse side. Finish is worn a bit, but still in really nice shape. No owner markings AT ALL. Based on the logo having the W diamond logo, this is 1924-1947 or so. http://www.alloy-artifacts.com/williams-supercompany.html $4



​
 
Last edited:
W

wildman1

Well-known member
Joined
Aug 24, 2009
Messages
274
Location
Ohio, Good Ole USA
Chris

I'll take this:

33) Snap On 9/16 obstruction or distributor wrench S-9832B - Made in USA - Stamped with a date code from 1964. Some loss of chrome around box end, no owner markings.

PM sent

George
 
OP
C

chrislehr

Well-known member
Joined
Apr 10, 2009
Messages
1,704
Location
Portland, OR
wildman1 said:
Chris

I'll take this:

33) Snap On 9/16 obstruction or distributor wrench S-9832B - Made in USA - Stamped with a date code from 1964. Some loss of chrome around box end, no owner markings.

PM sent

George
Click to expand...

PM'd you back - this was a bad editing job on my part. Sorry - that is $4, if still interested, you have first dibs.
 
A

alex71

Well-known member
Joined
Jan 19, 2009
Messages
2,819
Location
SE Florida
Interested in 29 and 35.. do you have anything else similar? a flat rate box could hold a lot more like those.
 
OP
C

chrislehr

Well-known member
Joined
Apr 10, 2009
Messages
1,704
Location
Portland, OR
Snap On TM-31 Clutch tool

1956 date code - in like new condition

$4

tm31.png
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom