Snap-On FSLF/TSLF ratchets...

[S/RConcepts]

Does anyone here on GJ still using these as much as I do? I find myself reaching for my FSLF more and more for home projects, and it's been really good to me. I had a TSLF as well, but I misplaced it a few years ago and I haven't been able to pick another one up since they seem to be made of pure gold and unobtanium (hard to find, and outrageously priced when you do). I'm just wondering if anyone else liked using them since they were pretty short-lived.

 

[KM223]

It's my most trusted and used ratchets I own! And I have a lot of Snap On ratchets.

Top right

 

[bsg1]

i've been keeping one eye open for one at the swap meet and it's just a matter of time….

 

[CutterFarms]

I bought one a couple years ago and it was missing the detent ball to hold the sockets on. I just got around to getting it rebuilt this year but don't recall ever using it. I need to start trying to once in a while.

 

[S/RConcepts]

It's good to hear I'm not the only one. They're one of those tools that seems like a strange idea until you actually start using them, and then you don't want to use anything else.

KM, your ratchet drawer is awesome!

 

[BK13]

Dangit, why do I always find out about this stuff AFTER it's discontinued?


Sent from my iPhone using Tapatalk

 

[Wamsutta]

It's my most trusted and used ratchets I own! And I have a lot of Snap On ratchets.

Top right

Thank you sir for that beautiful picture; made my day.

 

[1950mercury]

I just sold both for 220 shipped in the classifieds here...sold in a couple hours

 

[BK13]

the demand is too great... they need to bring these back so i can see what the fuss is all about

Yeah, I'd probably buy the F80 version at least, maybe the T72 as well.


Sent from my iPhone using Tapatalk

 

[S/RConcepts]

So, I've been playing with my FSLF for the past few days...


But wait... is that a?


Oh yes... FSLF80. It's been magical to use. #InB4SnapOn

 

[1950mercury]

Yeah, I'd probably buy the F80 version at least, maybe the T72 as well.


Sent from my iPhone using Tapatalk

I don't think they make a 8 or 72 version. Some guys are putting the 89/72 heads on the ratchet's though

 

[S/RConcepts]

I don't think they make a 8 or 72 version. Some guys are putting the 89/72 heads on the ratchet's though

I think BK was referring to IF they brought them back with the 80/72 option, he'd buy 1 or 2. You're correct that they never offered the option.
I did the swap you mentioned with mine, as pictured above.

I'd really like to see S/O bring these back as there is demand out there, but I've heard from a lot of techs that they forgo the use of hand tools in favor of powered ones because of flat-rate pay, which might partially explain the low sales. That said, these are still handy to have in situations where you wouldn't, or can't use air tools. Although, I used these plenty even when I was wrenching for a living.

 

[BK13]

I think BK was referring to IF they brought them back with the 80/72 option, he'd buy 1 or 2. You're correct that they never offered the option.
I did the swap you mentioned with mine, as pictured above.

Correct. I'd be all over Dual 80 versions, assuming no comfort grips.


Sent from my iPhone using Tapatalk

 

[Know Wosad]

Franks tools has the Koken versions if anyone is interested. 3/8 only I think.Better action than Snaps 9 series ever was(imNsho)
3774P-SR

 

[48548]

I have these and don't like the koken as it is clunky like an old proto.


Here are a few of mine and I did change the heads to dual 80's.

Here is my koken. The handle does not spin like the snappy ones.

 

[jeremy v]

Does the Koken have a handle that spins like the Snap-on? It looks like a solid handle in the Frankstools picture.

I still don't know what to think of Frank's. I made a $100 order 4 weeks ago and I haven't heard a thing and the order status link he sent me still shows no activity. I shot him a quick email two weeks ago to see if my order had shipped, because I have heard some bad stories on GJ. He responded quickly and said he didn't know my order status at the moment and he would get back to me later that day with an update, but he never did. All I know is I've made quite a few purchases that shipped directly from Japan over the last two years, and Franks has been the slowest to arrive by far. Every other order has been at my door within 3 weeks max, and it usually only takes two weeks since I'm on the west coast. I will give it another week before I email him again, but I won't be buying from him again. Customers shouldn't have to just sit and wonder what is going on for weeks, even a simple shipment confirmation email would have been great.

http://www.frankstools.com/ko3flhera3.html

 

[BK13]

Yeah, the KoKen is like a 36 or 45 tooth?


Sent from my iPhone using Tapatalk

 

[48548]

Yeah, the KoKen is like a 36 or 45 tooth?


Sent from my iPhone using Tapatalk

Not much.... I can check when I get home. We need more tool ****. I need to sell the stuff I don't use to get more snappy ratchets.

 

[48548]

It's my most trusted and used ratchets I own! And I have a lot of Snap On ratchets.

Top right

You always make me jealous with your tool stash....

 

[BK13]

Not much.... I can check when I get home.

Yikes, looks like 24.

http://www.koken-tool.co.jp/catalog/en/m/index.html#page=1


Sent from my iPhone using Tapatalk

 

[T45]

Yikes, looks like 24.

http://www.koken-tool.co.jp/catalog/en/m/index.html#page=1

Shouldn't matter on a speeder, or is that just the highest koken goes/?

 

[BK13]

I think they have 45 tooth, don't remember if that was in a pear head or round head, though.


Sent from my iPhone using Tapatalk

 

[jeremy v]

Oh great, thanks 48548 for answering my question about the Koken handle a minute before I asked it. Now I look like I don't know how to read and I must be blind too because I'm also incapable of interpreting huge, beautiful, clear, detailed pictures.

Does the Snap-on handle spin on mini bearings internally? It seems like it would be a bit squeaky during use if it didn't. The handle is so thin though. Is there a way to take the handle off, it looks visually like the two pieces must be permanently interlocked somehow?

 

[S/RConcepts]

I have these and don't like the koken as it is clunky like an old proto.


Here are a few of mine and I did change the heads to dual 80's.

Nice tool drawer ****! In the above photo, does the top TSLF (2nd ratchet down) have a "3/8 in a 1/4 body" head, or am I seeing things?

 

[48548]

Nice tool drawer ****! In the above photo, does the top TSLF (2nd ratchet down) have a "3/8 in a 1/4 body" head, or am I seeing things?

That is correct and t72 as well

 

[S/RConcepts]

^Cool deal! I was hoping I wasn't seeing things.

BTW, if anyone reading this thread has a spare TSLF they wouldn't mind letting go for a REASONABLE (not eBay pie-in-the-sky) price, PM me. I'm really starting to miss mine.

 

[KM223]

^Cool deal! I was hoping I wasn't seeing things.

BTW, if anyone reading this thread has a spare TSLF they wouldn't mind letting go for a REASONABLE (not eBay pie-in-the-sky) price, PM me. I'm really starting to miss mine.

The word is out unfortunately. Pie in the sky is the new norm.

 

[S/RConcepts]

The word is out unfortunately. Pie in the sky is the new norm.

Very true, one can wish though. I'll find another someday

 

[48548]

I bought all mine on fleabay and they weren't cheap.