Best tubing roller mod ever.

[ADSR]

Found this mod looking at princess auto tubing rollers.

 

[Ign]

I thought their stuff was usually HF equivalent but it uses the chain to drive both lower rollers like Eastwood and ....Mittler?.... maybe.

 

[2oolhound]

He needs an editor badly. I watched the 1st several minutes and he's still not on topic. (I haven't seen a bender yet)

For some reason I have no fast forward or progress bar to jump ahead on so he lost me as a viewer.

 

[MikeF2316]

He needs an editor badly. I watched the 1st several minutes and he's still not on topic. (I haven't seen a bender yet)

For some reason I have no fast forward or progress bar to jump ahead on so he lost me as a viewer.

Yup, I agree with this. He's too long at 32 minutes, get to the point.

 

[Wanna Ride]

Yup, I agree with this. He's too long at 32 minutes, get to the point.

A large majority of the DIY wizards on YouTube need to STFU and get on with it. They make a video that's thirty minutes long and has two minutes of info. Product of "everybody gets a trophy", and everybody wants to be an internet sensation...

 

[ADSR]

While I agree it's long, The mod itself is awesome compared to the power threader that everyone seems to use. I wouldn't have reduced the gear like he did tho. I would want 60 RPM vs. 30 that he used. I don't have all day to bend pipe. Speed is less of a factor when bending square tube vs. round.

 

[Ign]

I agree w above. 99% of YT have way too much talk at the start. Shut up and SHOW the point of the video within the first 15 seconds. It's a huge pet-peeve of mine with YT, I fast forward A LOT.

 

[2oolhound]

I'll revisit when I get my video controls (or lack of) resolved and I can jump to the good parts.

 

[racingtadpole]

There are no good parts.. he is ******* painful to watch.

Cliffnotes.. He takes an overhead electric winch, attaches it to the tube roller to power it, and wastes 42minutes of your time explaining how to do it.