To avoid these ads, REGISTER NOW!

The new 2016 Home Depot Clearance Thread

Status
Not open for further replies.

DR99

Well-known member
Joined
Sep 6, 2012
Messages
227
First !

Ha. The massive Ridgid gas compressors are 225.03 now

I found one at one store for the 225 price. Another store was full price and another store was at the 496 price they said they had 4 of them, but I couldn't find them in any overhead.
 
To avoid these ads, REGISTER NOW!

MorSpeed

Well-known member
Joined
Jan 30, 2016
Messages
51
Went in for a Ridgid miter saw, left with a DeWalt compressor instead!

Ridgid MS255SR 10" Sliding Double-Compound Miter Saw
Normally 399.99, marked down at some stores to 349.99 although I found it for 315.00 at my local store. I didn't see any stock left but it wasn't clearanced so they should be able to backfill/order in for you.

DeWalt D55146 4.5Gal / 200psi Air Compressor
Normally 329.99, marked down to 88.03!!!

...and for fun; here is the Fiat stuffed with the DeWalt.



Thanks for posting! Found one each for me and my dad. Fit them both in the minivan.


Sent from my iPhone using Tapatalk
 

OrneryDuck

Well-known member
Joined
Oct 17, 2012
Messages
120
Location
Gem of the Hills, FL
Got confirmation from my local store that the Ridgid miter saw was clearanced after all. Other stores still have normal pricing in place and quantities available.
 

laddy

Active member
Joined
Oct 25, 2009
Messages
42
Location
Central Ohio
Husky 39 inch work bench thing( the 30 dollar one) in northen/central jersey if anyone is looking for one. Pm for location.
 

grizzlyjmg

Well-known member
Joined
Feb 21, 2015
Messages
157
Read the note from Ryan and see that there are no restrictions regarding posting information about penny deals as previously alluded to by another member. As such, I just want to say that penny deals are still alive and available if you are willing to look. Went to three stores this AM and found penny deals at two of the three - and I didn't have to look hard. Found four (4) CE Tech 3-In-1 Charging Cables at two of the stores, a Kwickset Double Cylinder Deadbolt - clearly marked a penny in a shopping cart in the tool area, and finally a Bosch GLC-25-S Five-Point Self-Leveling Alignment Laser with Cross-Line - which was sitting on the clearance end-cap with a clearly displayed penny label on it (not sure how long it was sitting there; however, it was gone in a flash once I saw it). The laser was reportedly listed for $399 at HD (not sure how true that price was - but I can say that it is currently sold on Amazon for $279). Again, got all of the items through the SCO without incident - no bells, whistles, HD Storm Troopers, etc. Not sure how long the penny deals will last, but I will continue to look for and try to purchase same as long as they are available.

`
 

Attachments

  • IMG_0383.jpg
    IMG_0383.jpg
    143.5 KB · Views: 339
  • IMG_0384.jpg
    IMG_0384.jpg
    149.1 KB · Views: 381
  • IMG_0385.jpg
    IMG_0385.jpg
    148.1 KB · Views: 301
  • IMG_0386.jpg
    IMG_0386.jpg
    142.6 KB · Views: 301
  • IMG_0387.jpg
    IMG_0387.jpg
    140.9 KB · Views: 305
Last edited:

P_856

Well-known member
Joined
Sep 2, 2013
Messages
154
Location
South Jersey
I bought a few of those hoses last year when they hit the .03 level and it was the worse I've ever used sprung a leak within a week. I ended up giving he rest away.
 

uptownkevin

New member
Joined
Feb 13, 2016
Messages
1
Went in for a Ridgid miter saw, left with a DeWalt compressor instead!

Ridgid MS255SR 10" Sliding Double-Compound Miter Saw
Normally 399.99, marked down at some stores to 349.99 although I found it for 315.00 at my local store. I didn't see any stock left but it wasn't clearanced so they should be able to backfill/order in for you.

DeWalt D55146 4.5Gal / 200psi Air Compressor
Normally 329.99, marked down to 88.03!!!

...and for fun; here is the Fiat stuffed with the DeWalt.

Yeah saw this deal at the Gilbert , AZ Home Depot , all they had was the display , thought I could find one in a box . no deal , went back the next day and it was gone , bummed
 

LoveOldIron

Well-known member
Joined
Apr 19, 2015
Messages
563
image.jpg
And I actually found it!! :rocker:

Then they toppled it, and 3 other generators, off the top shelf onto the floor in the next aisle. :(
 

Jarreds

Well-known member
Joined
Apr 18, 2016
Messages
92
Hahaha what a bunch of idiots.
They will probably stick them back on the shelf as new.
The lift drivers from Home Depot are terrible.
I guarantee they are not reporting those incedents to OSHA.
 
To avoid these ads, REGISTER NOW!

LoveOldIron

Well-known member
Joined
Apr 19, 2015
Messages
563
Hahaha what a bunch of idiots.
They will probably stick them back on the shelf as new.
The lift drivers from Home Depot are terrible.
I guarantee they are not reporting those incedents to OSHA.

Up until today I've been pleasantly surprised at the skill they've demonstrated.

Next time, pay first, then have them go get it.

No worries. I may yet come out of this a happy camper. We'll see tomorrow.
 

rexer

Well-known member
Joined
Sep 4, 2012
Messages
195
Location
Earth
Picked up two 39" lower Husky boxes last nite
#1001-572-044 $38.02 ea..
 

Mattprother

Well-known member
Joined
Apr 26, 2016
Messages
99
Wow - crickets in here. Where did everyone go?
 

Attachments

  • image.jpg
    image.jpg
    19.7 KB · Views: 250

yosh2000

Banned
Joined
May 10, 2013
Messages
493
FYI, picked up a few items at a penny that rang up just fine. Penny's are still alive and well. Don't be scared...

Sent from my SM-G930V using Tapatalk
 

csmitty

Well-known member
Joined
Dec 17, 2010
Messages
1,542
Up until today I've been pleasantly surprised at the skill they've demonstrated.



No worries. I may yet come out of this a happy camper. We'll see tomorrow.

Grabbed a compressor Friday that I feared was going to meet a similar fate. It was shrink wrapped to a pallet, next to a tool box and next to the post for the rack, so no way to rotate it out. Then when he went in I think it pushed it under the toolbox pallet so finally he just forced it up and basically destroyed the compressor pallet, I didn't think it was going to make it down but he got it. That was the hairiest one I've ever seen, most have gone with out incident.
 

Rodbuster56

Active member
Joined
Mar 5, 2015
Messages
35
Location
Chicagoland
Seemed like those penny deals were all bogus in this area. The store employees that I had talked to, said that they didn't exist. Better off with a thread describing deals that you could actually receive.
 
Joined
Aug 29, 2016
Messages
13
online deals:

Kwikset
Model 976KTL LH RDT 11P SMT
Internet #204120069
Katara Double Cylinder Venetian Bronze Left-Handed Interior Pack Lever Feat SmartKey
Was $56.70
$17.01 /each
Save $39.69 (70%) through 09/04/2016
http://www.homedepot.com/p/Kwikset-...Feat-SmartKey-976KTL-LH-RDT-11P-SMT/204120069

Kwikset
Model 966AVL LH 502
Internet #204102817
Avalon Single Cylinder Rustic Pewter Left-Handed Interior Pack Lever
Was $32.24
$9.67 /each
Save $22.57 (70%) through 09/04/2016
http://www.homedepot.com/p/Kwikset-...d-Interior-Pack-Lever-966AVL-LH-502/204102817
 

DMPNJ

Member
Joined
Aug 26, 2016
Messages
5
Hi, I am new here, but I have been "lurking" for a little while. I havent been able to find any good deals lately. The HD's around me seem to be pretty dried up. I was able to find 6 of the IDevices switches for a penny each about a month ago. Im not really a penny finder though. I care more about .03 prices, but I havent found much at all lately. :eek:
 
Status
Not open for further replies.
To avoid these ads, REGISTER NOW!
Top Bottom