Show your new tool arrivals

[dodge610]

Just a few new purchases this weekend. Need to do some painting and a few small magnetic tool organizers for my tool box.


Sent from my iPhone using Tapatalk

 

[K-Dog]

Just a few new purchases this weekend. Need to do some painting and a few small magnetic tool organizers for my tool box.


Sent from my iPhone using Tapatalk

Make sure your masking skills are up to date with this ******. ( ask me how I know. )

Seriously, do a really really really good job masking. Trust me.

 

[cadavjo]

Make sure your masking skills are up to date with this ******. ( ask me how I know. )

Seriously, do a really really really good job masking. Trust me.

I opt to remove everything, and I mean everything, from the room that I do not want to be some shade of the color I'm spraying. Then after everything is removed, mask and plastic things you cannot. They are a lot of fun!

 

[dodge610]

Make sure your masking skills are up to date with this ******. ( ask me how I know. )

Seriously, do a really really really good job masking. Trust me.

Its all good Kdog this is only being used outside to stain my deck. And to do my privacy fence I put up over spray is not an issue this time luckily. Thanks for the heads up for inside painting.

 

[L.Cheapo]

I really like my StLP die grinders. I've been considering getting a cutoff and possibly and air hammer. Did you get it straight from StLP?


Sent from my iPhone using Tapatalk

I finally got to use this today. Its very nice. I'll be buying the other tools I want from them shortly.

 

[dodge610]

Be careful when doing that fence.

http://www.garagejournal.com/forum/showthread.php?t=337704&highlight=overspray+fence+neighbor

You got it I know it was a nightmare to put up my yard is all up hill so it had to be put up stair step style. Hopefully staining should be a breeze

 

[Tyguy1209]

Cornwell guy stopped by today and was running his yearly coat promo. You make a payment of 50 dollars every week 10 times and the coat is free. Or 75 if you just want to buy it outright. Also picked up a used (doesn't even look used) air saw out of the trade in/ repo bin for 60 bucks. Retails for 150 online. Also picked up and tire inflator and Chuck.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[Tyguy1209]

Woops 13 times, not 3

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[Tyguy1209]

10^^

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[Duster346]

New (to me) equipment arrivals over the weekend.

Scored this 90's model Delta 16 1/2" DP off my local craigslist for what I thought was a very good price (under $150).

And then traded for this TP Tools model 970 blast cabinet.

 

[MikeF2316]

Hex screwdrivers

Metric:

Fractional:

Metric, long bits

 

[MattVette89]

Received a few items off of eBay today.

Small group of battery tools:



Snap On roto head FH747:



1/4" mid length Snap On metric socket set:



I also got a single 12mm wrench to fill a set, but the seller was shady and took crappy pictures and "forgot" to mention all of the corrosion and pitting on it. I already opened an ebay case since he was uncooperative when I messaged him. Kind of pissed but oh well.

 

[R_einan]

Snap-on 3/8 metric semi-deeps and snap-on metric speed-hex set.

 

[tripplejl]

Few snap on purchases the past couple weeks and knipex pliers.

 

[HzEmall]

Snap On Thursday came on Monday this week, got some new toys. Nut drivers to complete my set and some 1/4" and 3/8" drivers.

 

[chrisnazzy]

Snap On Thursday came on Monday this week, got some new toys. Nut drivers to complete my set and some 1/4" and 3/8" drivers.

Oh and if only all that came in green! Or in orange for me! Funny I was on my Snap On guys truck a few hours ago having him check into some part numbers but we came up empty on availability.

Sent from my SPH-L720T using Tapatalk

 

[Jeepster425]

New Williams wrench set, 33-50mm, made in Taiwan, but still looks good at an insanely nice price

Sent from my SM-G925T using Tapatalk

 

[HzEmall]

New Williams wrench set, 33-50mm, made in Taiwan, but still looks good at an insanely nice price

How much?

 

[Jeepster425]

How much?

155$

Sent from my SM-G925T using Tapatalk

 

[WhiffySpark]

Amazon deal?

 

[KMdef9]

Needed a more powerful impact. I tried the kobalt one and didn't like it so I returned it and got this one. It works pretty good.


Sent from my iPhone using Tapatalk

Is that 1/4 fittings i see?

No wonder you felt like you needed more power. Next step is to upgrade lines and fittings to 3/8!

 

[Kamanhart]

A few new additions from last week.

Coast head lamp
Cat Branded light from costco
MG725 picked up off ebay for $160 with the boot
Astro 3/8 micro impact
and Lastly SK 3/8 Impact swivel set.

I have to say the Astro impact blew away my expectations, I had a complete front ended rebuild and 3" lift kit on an 03 GMC 1500HD and similar front end service on an 06 Pontiac Grand Prix. I only had to pull out the big Snappy once and that was for the axle nuts on the GMC.

 

[wvhillbillie]

Proto J5457F, Vaughan 2lb, Westward 16mm 1/4.


Sent from my SM-T110 using Tapatalk

 

[Brenticus]

Snap On Thursday came on Monday this week, got some new toys. Nut drivers to complete my set and some 1/4" and 3/8" drivers.

What are the model numbers on this socket drivers?

 

[04chase]

scored this st the sesp meet for 100 . New with rhe 19 knurled handle. Also got a snap on piston hammer new for 40 bucks

 

[mike528]

Got the gearwrench set. These are a lot heavier than I expected.

 

[imd12nv]

Got these yesterday never tried any of Matco's cordless tooled but got a great deal on it so figured id give it a go. Also picked up a small set of 1/2 inch drive sockets




Sent from my SM-N900T using Tapatalk

 

[Tyguy1209]

cheap puller from pep boys account at work.

Used snap on 3/8 flex head ratchet from the snapon truck that was a repo.
Ordered some items from him
Snap right pliers, stubby 3/8 ratchet and a hose pinch off plier.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[hemdale]

Vessel 121561 820FX-4 Stubby Ratchet Screwdriver

Hi mate,

How do you like the Vessel 820FX after a year ?

 

[1foxracing]

Hi mate,

How do you like the Vessel 820FX after a year ?

Rarely used just because the handle is so small I kind of find it hard to grip in some circumstances. It is handy for building/repairing desktop computers and that's probably where I use it most.

 

[[memphis]]

$2 Deal today on my way home at an antique shop...
1951 Snap On OEX-16 Made in Canada

No patent numbers on it surprisingly but it has that funny shaped I date code. I`m spending some time going at it with Never-Dull but there is still 65 years of patina left.

It`s the first snap-on tool I bought. The dang wrench was probably only $3 in 1951!

 

[3TV]

A few backordered Matco tools trickling in, ... a screwdriver and a pick set.

 

[OCD]

Some pearl blue, goes good with the green!!

Stripper/crimper was part of a bogo deal,

Promo bonus,

 

[Hopalong604]

Everyone is getting the SO thermal imager

 

[schor]

Had a good score on a couple drill chucks, a puller and some endmills. Not new but a steal IMO.

 

[OCD]

Everyone is getting the SO thermal imager

They are pretty cool, and hot!!

I think dealers might have had to buy a certain amount during the show to get a deal on them that Snap On was offering... I committed to one back then, and got $400 off the retail price!! Finally showed up!!

 

[not-required]

Thermal imagers are awesome. I've been using them for a couple months. Working for the fire dept has its perks, every truck will have at least one in it.

 

[mike528]

Thermal imagers are awesome. I've been using them for a couple months. Working for the fire dept has its perks, every truck will have at least one in it.

Depends on the age of the equipment, we have one on the engine and one on the equipment van, both are over 10 years old and in dire need of replacement.

 

[d.mcfarland]

Snap On long reach pliers. Awesome so far.

 

[not-required]

Depends on the age of the equipment, we have one on the engine and one on the equipment van, both are over 10 years old and in dire need of replacement.

That's true. Ours are pretty new and work great, although battery life isn't great but I'm not sure if that's how they all are. I don't have anything else to compare it to.