Show your new tool arrivals

[Bobcat753]

I want to drink the snap on koolaid again, but need to stop as it is addicting.

The Snap On Koolaid is sweet but I have drank way too much of the other Koolaids and need to stop! But it is so hard to resist

I think it all might be drugged

 

[irisservice]

Some new toys

 

[Jarhead0408]

Some new toys

Is that an extended tap wrench on the left there? If so, that's pretty neat.

Brand and price if you don't mind me asking?

 

[irisservice]

Facom Tools 830A.L Long Ratchet Tap Wrench
Got it as gift..

 

[chrisnazzy]

Snap-on FHKFD80 in yellow finally showed up, and a 3/8 SAE semi-deep set.

I think you'll like that FHKFD80Y. I picked one up in orange shortly after they were plastered all over here when the debuted at convention. Some other GJ'ers weren't so sure how useful it would prove to be. I have found that compared to a standard F80 I like it better. My hand covers the whole handle and the flex gives you the ability to just slightly change the angle of the handle for knuckle clearance. Im glad I got one.....I'm sure you will be too.

Chris

Sent from my SPH-L720T using Tapatalk

 

[Jarhead0408]

Facom Tools 830A.L Long Ratchet Tap Wrench
Got it as gift..

Good to go. Thanks for the info friend. It looks pretty snazzy!

 

[upgrading]

I like all those long Facom screwdrivers.

 

[oh1ws6]

eBay purchase showed up today, proud to be an American set from 2002!

 

[Skin]

Steelman Pro long wrench set.

Low profile reverse switch and extended ring. Compared to a 84/88T 1/4 with a shallow socket and a normal wrench.

On the down side they feel a bit coarse on the back drag despite being 72T but this is the best design I could find with the extended ring, the other one having a push through switch on the side of the wrench head. Should improve after a soak in some oil and use.

 

[K-Dog]

Steelman Pro long wrench set.

Low profile reverse switch and extended ring. Compared to a 84/88T 1/4 with a shallow socket and a normal wrench.

.

I have been looking for a set of wrenches like this. Leaning towards Gearwrench, but open to other options. How much was this set ?

 

[mfrantz90]

http://uploads.tapatalk-cdn.com/20161028/

Snap on compucheck fuel pressure test set for all the diesel stuff we have at my new shop


Sent from my iPhone using Tapatalk

 

[Skin]

I have been looking for a set of wrenches like this. Leaning towards Gearwrench, but open to other options. How much was this set ?

About $100.

 

[HzEmall]

Been watching these 1/4" drive shallow socket/ratchet set. When it's Snap On Thursday and they are close to half price you have to say "I'll take some of that!"

 

[R_einan]

I think you'll like that FHKFD80Y. I picked one up in orange shortly after they were plastered all over here when the debuted at convention. Some other GJ'ers weren't so sure how useful it would prove to be. I have found that compared to a standard F80 I like it better. My hand covers the whole handle and the flex gives you the ability to just slightly change the angle of the handle for knuckle clearance. Im glad I got one.....I'm sure you will be too.

Chris

Sent from my SPH-L720T using Tapatalk

I'm pretty exited about it, I got it's big brother a month or so ago, the FHFD80 also in yellow, and have enjoyed it immensely.

 

[chrisnazzy]

I'm pretty exited about it, I got it's big brother a month or so ago, the FHFD80 also in yellow, and have enjoyed it immensely.

Okay so now order an FHLFD80 in whatever color they have available (probably green, orange or red) and order a yellow replacement handle for an FHD80. Then you will have all the brothers. The FHLFD is about 13" long.

Because of all the colors available right now in the two new ratchets you already have, replacement handles can also seem to be ordered. The part number even comes up on their site.

It is FHD80-12Y

This handle should be able to be installed onto any 3/8 ratchet that came originally with a hard handle (not the soft grip). Order a few extra handles now while you can.

I have an FHNFD100G round swivel head ratchet on order now as well as several orange replacement handles for the FHD80. I'm hoping to have some awesome custom ratchets soon.

Sent from my SPH-L720T using Tapatalk

 

[JAKE-THE-TOOL-MAN]

Been watching these 1/4" drive shallow socket/ratchet set. When it's Snap On Thursday and they are close to half price you have to say "I'll take some of that!"

This set is so handy, nice buy!

 

[Roberts210]

36 inch S-K 3/4 breaker bar from Harry Epstein.

Chrome is excellent, knurling is great.

I have an old 3/4" Proto 24" ratchet. I've used the ratchet before, with a 3 foot cheater bar to break loose monster nuts on my tractor and bushhog but I was afraid I'd break it. No fear of breaking this baby.

 

[JAKE-THE-TOOL-MAN]

36 inch S-K 3/4 breaker bar from Harry Epstein.

Jealous! I want one of those bad boys, I wish SK would release a 1/2 version as well.

 

[Al Bundy]

36 inch S-K 3/4 breaker bar from Harry Epstein.

Chrome is excellent, knurling is great.

I have an old 3/4" Proto 24" ratchet. I've used the ratchet before, with a 3 foot cheater bar to break loose monster nuts on my tractor and bushhog but I was afraid I'd break it. No fear of breaking this baby.

The cat looks unimpressed. I like it though.

 

[NoahG]

Ain't it purdy

I really like how the handle feels



Sent from my iPhone using Tapatalk

 

[04chase]

These all came in and found a good deal locally on a set of 1/2" shallow and deep 6 point sets.

 

[colin39]

4chase:-Are those adjustable spanners made Iin USA or made in Spain?

I didn't by tools this week, however I did have this advertisement panel appear in the post bought off the Bay of e, and it fits perfectly here
[URL=http://s1033.photobucket.com/user/colin39/media/DSC00001_zpskjcjnsnc.jpg.html] [/URL]

 

[Roberts210]

The cat looks unimpressed. I like it though.

Yeah, she sniffed it, then looked up at me and said, "Stoopid hooman. Ya can't eat it and ya can't take a nap on it. What possible good is it?"

 

[04chase]

4chase:-Are those adjustable spanners made Iin USA or made in Spain?

I didn't by tools this week, however I did have this advertisement panel appear in the post bought off the Bay of e, and it fits perfectly here
[URL=http://s1033.photobucket.com/u...s/a420/colin39/DSC00001_zpskjcjnsnc.jpg[/IMG][/URL]

I belive they both said Spain . The mini pliers did for sure and i recall the adjustables did as well.

 

[jeffmoss26]

So much Snappy goodness

 

[1foxracing]

All from Harry J Epsteins and all Wright Tool except for the Granco socket set.

 

[dodge610]

The tool box mat was free with points seems to be decent quality may. The extended ball hex were $21.00 and some change not USA but nice chrome and decent quality.


Sent from my iPhone using Tapatalk

 

[cliftonbros89]

36 inch S-K 3/4 breaker bar from Harry Epstein.

I bought one last year for SK day when they first came out. 100% satisfied with mine. Broke free and tightened up a lot of nuts/bolts with that thing. Very strong and sturdy. Use it all the time on our JD 4630 self-propelled sprayer when we swap out wheels and tires on it. Awesome! Actually considering buying another to keep in my service truck.



Sent from my iPhone using Tapatalk

 

[bodyguy16]

New keyless precision drill chuck, no more broken chewed up chucks...

Sent from my SM-G903W using Tapatalk

 

[mkIValh]

Snap on socket were pawn shop find for $70 11/16''- 1 3/8'', the 9.0 is also pawn shop for $150 brand new. M12 sander/polisher from the milwaukee service center for $135.

 

[jonti48310]

dodge610. What was the price and part # on that craftsman set?

 

[dodge610]

dodge610. What was the price and part # on that craftsman set?

Look in the last 3 pages of hot deals section its in there. Just too save both of us a little time.

 

[MattVette89]

S-K metric swivel socket set, used.

 

[jonti48310]

Look in the last 3 pages of hot deals section its in there. Just too save both of us a little time.

Great. Thanks man!

 

[MattVette89]

This came in today to fill out my set. The famous 10mm.

 

[90zcar]

what is that matt...a 1/4 midsize?


Sent from my iPhone using Tapatalk

 

[dodge610]

. Needed a couple more tool bags had more points got the combo deal. $2.99 out the door could not pass it up.


Sent from my iPhone using Tapatalk

 

[MattVette89]

what is that matt...a 1/4 midsize?


Sent from my iPhone using Tapatalk

Yes, 1/4" semi deep. It was missing from a used set I bought. I was lucky enough to find a replacement on eBay.

 

[K-Dog]

Need to remove a mirror on a Mercedes-Benz, in order to repair a door.

WTF !?!?!?! A five point tamper proof torx !?!?!?!?

Never heard of such a thing !!

Damn. Gotta order a new tool.

Amazon.com...

 

[Caparris]

Not uncommon on German cars

Had the same on some cam gear bolts on one once

So stupid--it's not like it really stops anyone from getting it off, just makes people spend money on tools and wait another day or two