Found a deal on craigslist? - List Here!

[sgs236]

still there. wonder if it's a decent brand.
Now, That's a set I would buy, If I found a good deal.
Something I don't have, and could probably use at some point.

Looks to me to be the standard made in china set that you can buy on EBAY for 55-75 dollars delivered to your door.

http://www.ebay.com/itm/21-PC-3-4-DRIVE-SOCKET-WRENCH-SET-METRIC-TOOL-KIT-12-POINTS-SOCKETS-3-4-DR-/271681593843?hash=item3f417c21f3:g:uMUAAOxyO2dRi1BC

 

[a52-830]

still there. wonder if it's a decent brand.
Now, That's a set I would buy, If I found a good deal.
Something I don't have, and could probably use at some point.

assuming this isn't some high end sarcasm . . .

it isn't a steal. it is a cheap chinese set, available new for less:

https://www.amazon.com/dp/B00FEQIIC2/?tag=atomicindus08-20

https://www.amazon.com/dp/B019RPCNUS/?tag=atomicindus08-20


you can also get it at HF:

http://www.harborfreight.com/21-piece-sae-3-4-quarter-inch-industrial-quality-socket-set-40996.html

is it a good deal? i dont know. were it me, i would spend a bit more for a bit less:

GearWrench 80879 3/4-Inch Drive 12 Point Socket Set, 13-Piece
https://www.amazon.com/dp/B00A803EAA/?tag=atomicindus08-20

missing the breaker bar, and a larger extension, but never the less a much better quality set. if you are so inclined, you can get a gw branded extension and breaker from cripedistributing.com

there ya go, more than you likely wanted, but . . . . .

 

[bubinga]

Man, I would like to go get this, Looks heave duty as hell,
Pretty good price too,
i bet it don't last. Wonder how many speeds it is?
http://pittsburgh.craigslist.org/tls/5941994505.html
Delta drill press - $260 (Pittsburgh craigslist)

 

[larryq]

Someone's having a kennedy sale in the SF east bay. $20 and $25 respectively:

http://sfbay.craigslist.org/eby/tls/5942866392.html

http://sfbay.craigslist.org/eby/tls/5942865694.html

 

[bubinga]

no, wasn't sarcasm
there ya go, more than you likely wanted, but . . . . .

assuming this isn't some high end sarcasm . . .

it isn't a steal. it is a cheap chinese set, available new for less:

https://www.amazon.com/dp/B00FEQIIC2/?tag=atomicindus08-20

https://www.amazon.com/dp/B019RPCNUS/?tag=atomicindus08-20


you can also get it at HF:

http://www.harborfreight.com/21-piece-sae-3-4-quarter-inch-industrial-quality-socket-set-40996.html

is it a good deal? i dont know. were it me, i would spend a bit more for a bit less:

GearWrench 80879 3/4-Inch Drive 12 Point Socket Set, 13-Piece
https://www.amazon.com/dp/B00A803EAA/?tag=atomicindus08-20

missing the breaker bar, and a larger extension, but never the less a much better quality set. if you are so inclined, you can get a gw branded extension and breaker from cripedistributing.com

there ya go, more than you likely wanted, but . . . . .

 

[stinkity stoink]

Might be worth a look for someone. Looks like older mac boxes and some tools
http://cnj.craigslist.org/tls/5943835550.html

 

[bubinga]

Pretty nice delta homecraft drill press on Pittsburgh Craigslist for $100.00
http://pittsburgh.craigslist.org/tls/5941529039.html


Sent from my MotoG3 using Tapatalk

Hell, there's another one on there for $100.00, even has the retirement light! I had to have it one time, I paid $100.00 for a "cherry" one on e bay once. (Retirement light)
Delta Drill Press - $100<small> (North Huntingdon)</small>Pittsburgh Craighlist)

http://pittsburgh.craigslist.org/tls/5943865891.html

Sent from my MotoG3 using Tapatalk

 

[danfromsyr]

metal garage storage cabinets

Utica, NY area
8 & 10 drawer cabinets for sale... garage storage, sewing cabinet. (Richfield Springs
http://utica.craigslist.org/for/5935827557.html

8 & 10 drawer cabinets for sale. These are very well made vintage microfilm cabinets. Very minor dents and scratches. 10 drawer cabinet measurements are 23.5" wide, 28" deep and 51" tall. 8 drawer cabinet measurements are 15" wide, 28.5" deep and 52.25" tall. Great for garage organization or storing any type of hardware. Asking $200/each for the 10 drawer cabinet and $150 for the 8 drawer. These are a steal at this price!!!! Don't pass up the opportunity to get your hand on a really nice storage cabinet. Unit weights over 100 lbs. and is pickup only.

 

[BajaScout]

Looks like a good deal on the lathe.

https://sandiego.craigslist.org/nsd/tls/5945935107.html

 

[Whiskeybadger]

For anyone in the Portland, OR area, I Scored 4 sheets of Slatwall with hangers for $80 from a running shop that was moving. They still had a lot left. Call Jeff at 720 400 2131

 

[larryq]

10 drawer Remline chest for $95, including a kennedy-esque machinists chest on top in Danville CA.

http://sfbay.craigslist.org/eby/tls/5950269071.html

 

[Shiftless]

larryq found another sweet deal. This won't last at that price. Remline is vintage quality.

 

[Nelson58]

That's a steal for that stuff. Harbor Freight is more.

 

[MissileBear]

Wilton 935 Bullet - $165 Looks real clean. I'd pick this up myself, but I am just really not a huge fan of these (I know, the majority of you just fell off your chairs). It's been up for two days, but stuff doesn't necessarily go quick around here.

http://rochester.craigslist.org/tls/5948884855.html

 

[bubinga]

Looks like a good deal on the lathe.

https://sandiego.craigslist.org/nsd/tls/5945935107.html

It's gone.
What was it, wood lathe, metal lathe?
How much was it?
Was it clean looking?

Sent from my MotoG3 using Tapatalk

 

[MissileBear]

Good deal on a Wissota grinder - 1/2 hp, 115v, $40

http://syracuse.craigslist.org/tls/5942114175.html

 

[bubinga]

Your exactly right, it's awesome for drill presses, mills, belt grinders and wood and metal lathes.





I completely agree, the welders are a complete pain with high failure rates in blades and it takes too much time wasted trying to make them right.

Have it on my Olivier wood lathe.
It's awesome, cause I use the factory reeves drive also.

Sent from my MotoG3 using Tapatalk

 

[bubinga]

Not sure if this is a good deal or not but it looks old and sturdy

Joiner - $125 (Springfield)

I don't know, but I know I'd like to have that grinder stand its sitting on.

Sent from my MotoG3 using Tapatalk

 

[bubinga]

assuming this isn't some high end sarcasm . . .

it isn't a steal. it is a cheap chinese set, available new for less:

https://www.amazon.com/dp/B00FEQIIC2/?tag=atomicindus08-20

https://www.amazon.com/dp/B019RPCNUS/?tag=atomicindus08-20


you can also get it at HF:

http://www.harborfreight.com/21-piece-sae-3-4-quarter-inch-industrial-quality-socket-set-40996.html

is it a good deal? i dont know. were it me, i would spend a bit more for a bit less:

GearWrench 80879 3/4-Inch Drive 12 Point Socket Set, 13-Piece
https://www.amazon.com/dp/B00A803EAA/?tag=atomicindus08-20

missing the breaker bar, and a larger extension, but never the less a much better quality set. if you are so inclined, you can get a gw branded extension and breaker from cripedistributing.com

there ya go, more than you likely wanted, but . . . . .

Not auguring, just saying, reviews seem decent (good) on the $60.00 set at Amazon.

Sent from my MotoG3 using Tapatalk

 

[Jaxwagen]

Any Lufkin fans here? I found a piece that would make some good wall art.

http://pittsburgh.craigslist.org/atq/5953222130.html

 

[a52-830]

Not auguring, just saying, reviews seem decent (good) on the $60.00 set at Amazon.

Sent from my MotoG3 using Tapatalk

oh, i agree that those sets are a great value, and are likely perfectly adequate for the jobs most of us put them to.

and while 50% more for a less complete kit sounds insane, it is not a completely unreasonable tradeoff considering that it comes from a reputable company.

i just like people to make informed decisions. i would rather know my options, and choose incorrectly, than not realized i had choices, even more expensive ones.

 

[bubinga]

oh, i agree that those sets are a great value, and are likely perfectly adequate for the jobs most of us put them to.

and while 50% more for a less complete kit sounds insane, it is not a completely unreasonable tradeoff considering that it comes from a reputable company.

i just like people to make informed decisions. i would rather know my options, and choose incorrectly, than not realized i had choices, even more expensive ones.

Sounds good, Like if I was still working in a garage, the gearwrench set would likely be better.

 

[Shiftless]

Sounds good, Like if I was still working in a garage, the gearwrench set would likely be better.

How many of us "need" to own a 3/4 inch drive set? (not talking about diesel mechanics, etc.)
I picked up a vintage New Britain 3/4 inch drive ratchet at a garage sale just because it was only $5.00 I have no sockets. Stupid, right???
If I stumble over a set of vintage high quality 3/4 inch drive sockets at a "you ****" price, I will probably succumb to the prevailing GJ logic and buy them.

 

[bubinga]

Craftsman Drill Press- Bench Top - $215<small> (Parks Twp.) (Pittsburgh )</small>

Nice looking, guess its an early 150, looks like fresh paint.


http://pittsburgh.craigslist.org/tls/5956399944.html

 

[Shop Dad]

Nicely restored.

 

[dngrmse]

From a local CL ad-
http://newjersey.craigslist.org/tls/5958569379.html

Seems like one heck of a deal, but I don't know the first thing about it.

For Sale:

South Bend Heavy 13" Lathe, 24" between centers.
Hardened and ground ways still in fantastic shape.
Quick change gearbox for Imperial (US) threads.
Comes with DRO on both X and Z axis.
Collet holder and draw bar included. Collet s are not.
Dead center for head and tail stock included.
Tool holders for right and left tools included. Tools are not.
One phase 2HP 220V motor with forward and reverse drum switch.
Chuck backplate not included, but will sell for additional cost. For 8" Bison.

Lathe is in full working order, but is a little tired. It no longer is sufficient for commercial purposes, but would make a fantastic hobby machine. We recently replaced it with a much larger machine.

I will load onto a truck for free with a forklift. I can place it on a pallet if that helps at the other end.

 

[Warped5]

That is one heck of a deal. Wish it were closer.

I wonder what the seller means by 'a little tired' ..

 

[Dr Stan]

That is one heck of a deal. Wish it were closer.

I wonder what the seller means by 'a little tired' ..

Ditto on the deal. Even if it required a complete tear down with all the accessories it would be a steal. As to the "little tired" I'm guessing worn out/slick drive belt.

 

[macgee]

Ditto on the deal. Even if it required a complete tear down with all the accessories it would be a steal. As to the "little tired" I'm guessing worn out/slick drive belt.

Those are very nice lathes for the size, only problem with those when used in a commercial production setting is that unlike hobbyist and one off tool makers is that usually there only being used repeatedly to make the same item or has a specific task over and over again over the years because they are making an item for a product the company sells. In doing so you get high wear areas in very specific spots on the bed and cross slide making it tired and sloppy in those spots. Also small lathes in commercial settings having a tendency to get used for jobs that are bigger than it what it was intended for like using a small vise. When they say they're replacing it with a bigger lathe, that scares me.

Lets hope it just a slick belt for the future owner. I would certainly be checking it out, its looks beautiful but would be asking a lot of question to the previous operator and bringing dial indicator set up to check the wear.

If it checks out ok then it's a screaming deal.

 

[bubinga]

Those are very nice lathes for the size, only problem with those when used in a commercial production setting is that unlike hobbyist and one off tool makers is that usually there only being used repeatedly to make the same item or has a specific task over and over again over the years because they are making an item for a product the company sells. In doing so you get high wear areas in very specific spots on the bed and cross slide making it tired and sloppy in those spots. Also small lathes in commercial settings having a tendency to get used for jobs that are bigger than it what it was intended for like using a small vise. When they say they're replacing it with a bigger lathe, that scares me.

Lets hope it just a slick belt for the future owner. I would certainly be checking it out, its looks beautiful but would be asking a lot of question to the previous operator and bringing dial indicator set up to check the wear.

If it checks out ok then it's a screaming deal.

How much was it?

Sent from my MotoG3 using Tapatalk

 

[84scrambler]

http://sfbay.craigslist.org/scz/tls/5959652559.html

$50 in Santa Cruz area...

 

[macgee]

how much was it?

Sent from my motog3 using tapatalk

$600

 

[zporta]

Blackhawk 3/4" Impact socket set $75


https://baltimore.craigslist.org/tls/5960555683.html

 

[Shiftless]

https://baltimore.craigslist.org/tls/5960555683.html

Thanks for posting but ...
Please follow the format suggested in post #1 and include a description and the price as well as the link.

 

[b7labelle]

Big box. Made me chuckle

FREE - Grand Rapids

http://grandrapids.craigslist.org/zip/5961366155.html

 

[ishamael69]

Matco toolbox and tools, $2500

Good deal or not, I can't tell...

https://tulsa.craigslist.org/tls/5962738249.html

 

[PFSard]

Here's a Wilton vise for someone in AZ .

------------------------

LARGE COMBINATION BENCH VISE - $80 (U.S. 60 &COUNTRY CLUB)
http://phoenix.craigslist.org/evl/tls/5963145885.html

Large swivel combination bench vise. Works great; tight, smooth, very
heavy. Weights around 60 pounds. Four mounting points. Two lock down
bolts. 360 degrees swivel. Includes-self centering pipe jaws for up to
3 1/2" pipe. 4 1/2" jaws, 4 3/4" throat depth, 6" opening. $80.00 firm.

 

[Shiftless]

Here's a Wilton vise for someone in AZ .

------------------------

LARGE COMBINATION BENCH VISE - $80 (U.S. 60 &COUNTRY CLUB)
http://phoenix.craigslist.org/evl/tls/5963145885.html

Large swivel combination bench vise. Works great; tight, smooth, very
heavy. Weights around 60 pounds. Four mounting points. Two lock down
bolts. 360 degrees swivel. Includes-self centering pipe jaws for up to
3 1/2" pipe. 4 1/2" jaws, 4 3/4" throat depth, 6" opening. $80.00 firm.

PFS:
Great find!
$80 is a smoking hot deal for a C1 bullet even if it isn't perfect.
Anybody near Phoenix better jump on this one quickly.

 

[bubinga]

Man, I would SO like to go get this, But money and space are short,
Have 4 drill press's right now...LOL
Its a floor model too. Appears to not have "arc of shame" either.
Price is right IMO too!
DELTA DRILL PRESS - $100 (FREEDOM - CRANBERRY) (Pittsburgh Craigslist)

http://pittsburgh.craigslist.org/tls/5963170309.html

 

[bubinga]

Here's a Wilton vise for someone in AZ .

------------------------

LARGE COMBINATION BENCH VISE - $80 (U.S. 60 &COUNTRY CLUB)
http://phoenix.craigslist.org/evl/tls/5963145885.html

Large swivel combination bench vise. Works great; tight, smooth, very
heavy. Weights around 60 pounds. Four mounting points. Two lock down
bolts. 360 degrees swivel. Includes-self centering pipe jaws for up to
3 1/2" pipe. 4 1/2" jaws, 4 3/4" throat depth, 6" opening. $80.00 firm.

PFS:
Great find!
$80 is a smoking hot deal for a C1 bullet even if it isn't perfect.
Anybody near Phoenix better jump on this one quickly.

darn right
here's a picture cause it probably won't last