Show your new tool arrivals

[tonyciambrone]

It's...It's...beautiful.

Part Number?

 

[OCD]

What brand are those clamps? I need a different color than everyone else since we use many pairs at work and sometimes they get mixed up with other co workers



Sent from my iPhone using Tapatalk

They are (Snap On) Blue Point... Made in Spain... Nice clamps, I like them!!

 

[Project_shadow]

Nifty, gonna have to get snap on to get some more variety on his truck


Sent from my iPhone using Tapatalk

 

[IMStuner]

This just came in from Amazon. The finish could be better but for $111.55 I'm not complaining.


Sent from my iPhone using Tapatalk

 

[tvtaurus]

New Sunnex specialty wrenches came in from Amazon.

 

[ptgarcia]

Irwin (NWS) lineman's pliers and Lang retaining ring pliers.



Paul

 

[Strouty]

That is a shame sunex makes those wrenches in China. It must be for the chrome, the impact sockets are made in Taiwan.

 

[wvhillbillie]

Channellock little champ, trusty cook knock off that was bought for me.


Sent from my SM-T110 using Tapatalk

 

[Tenex]

Irwin (NWS) lineman's pliers and Lang retaining ring pliers.

Paul

What did you pay for the Irwin pliers? The Lowe's near me is selling them for $42.99

 

[Qualitytools]

Irwin (NWS) lineman's pliers and Lang retaining ring pliers.



Paul

I just purchased and received a set of the Lang 1434 however, unfortunately they were defective (they will not change from internal to external) and I am returning them. Where did you purchase yours and how much may I ask?

 

[tvtaurus]

That is a shame sunex makes those wrenches in China. It must be for the chrome, the impact sockets are made in Taiwan.

Not all of their wrenches are made in China. The ones that I got today were made in Taiwan. The Sunex 9917MPR are made in China; still a nice set I'm sure.

 

[Strouty]

I think the hardest part to swallow is over a hundred bucks and made in china.

 

[K-Dog]

Today I got a fresh pair of daily use gloves, and these handy dandy Dent-Fix fender gap gauges. Simplifies hanging fenders and doors. One side has magnets for steel panels and the other side has a suction cup for aluminium and plastic.

 

[Skin]

<img src="https://image.ibb.co/cFwkfa/xc.jpg" alt="xc" border="0">

 

[CrazySanMan]

It's...It's...beautiful.

Part Number?

1/4" Drive Williams USA Black Finish Sealed Narrow Head Ratchet

5 1/4" Overall Length, 36 Teeth

Part #MB-52EHA

 

[ptgarcia]

What did you pay for the Irwin pliers? The Lowe's near me is selling them for $42.99

$26 from Amazon. These are the 8"; the 9-1/2" are $40.

I just purchased and received a set of the Lang 1434 however, unfortunately they were defective (they will not change from internal to external) and I am returning them. Where did you purchase yours and how much may I ask?

Amazon, $19. You can actually get them cheaper on ebay if you shop there.

Paul

 

[anndel]

Picked this up at the Snap On truck, SBF80A 1/2 in drive flex head bent handle:

 

[pstemari]

Little thread relief cutting tool for the lathe.

Sent from my Nexus 6 using Tapatalk

 

[mike528]

From the truck

From amazon

From the scrap bin at work, summer project, rebuilding the cylinders and making it into a motorcycle lift

 

[pepi]

Handy for a mill or drill press

 

[KM223]

From the truck

Was thinking about picking a set of these up. Have you had a chance to try them out? What's the part number for a 22 piece set?

 

[mike528]

122tsty. I haven't had a chance to use them yet. I have a couple jobs coming up where I may need them. I live in the salt belt so they will get used at some point. I have the bluepoint 3/8 set already

 

[KM223]

Thank you Sir! Fantastic looking set of tools you scored BTW!!

 

[Qualitytools]

$26 from Amazon. These are the 8"; the 9-1/2" are $40.

Amazon, $19. You can actually get them cheaper on ebay if you shop there.

Paul

Thanks ptgarcia, I did purchase it from eBay it was $11 + $3 shipping however, as I said it was defective so it's on its way back. It's too bad because I really needed to use it this weekend!

 

[MattVette89]

1/4" wobble extension set, used.

 

[Strouty]

Posted in error.

You can delete your posts.

 

[MattVette89]

You can delete your posts.

Thanks for the tip. I've never really needed to. For anyone else who hasn't done it, click edit and then under "go advanced" you have that choice.

 

[pstemari]

Handy for a mill or drill press

Is that 3/8" or 1/2"? I didn't think Starrett made a double ended one in 3/8".

Sent from my Nexus 6 using Tapatalk

 

[KnurledNut]

 

[danscobra6]

Going to see if this will knock a Honda crank bolt loose.

 

[Ramblin Man]

Going to see if this will knock a Honda crank bolt loose.

Add this socket to it and you will have a better chance, in my opinion.
https://www.amazon.com/dp/B00RGNCV1U/?tag=atomicindus08-20

 

[AntiqueVises]

Bought a new toolbox today! 56" US general.

couple things, any reason it didn't come with a tag on the front?

Also what kind of grease do I use for the ball bearings and slides? going to lowes right now for some

 

[dodge610]

A few organizers for the tool boxes. Starting to finally get organized in the shop. Long overdue[emoji41]


Sent from my iPhone using Tapatalk

 

[danscobra6]

Add this socket to it and you will have a better chance, in my opinion.
https://www.amazon.com/dp/B00RGNCV1U/?tag=atomicindus08-20

For certain a good socket and no extension is a plus, that and big torque in reverse should zip them right out. The last V6 I did my IR would not even touch it.

 

[AJ.]

BGS stud setter / remover. I got his a few weeks ago but just used it for the first time

https://postimage.org/

Cheers Andrew

 

[kball]

One of the Home Depot's around me finally had the P717 Ryobi LED in stock. Pics don't really tell the story but there's is no comparison.

LED vs. original incandescent

 

[b7labelle]

For certain a good socket and no extension is a plus, that and big torque in reverse should zip them right out. The last V6 I did my IR would not even touch it.

What's he theory behind the socket? I get the extensio part...fewer joints=less friction and less 'misdirected' torque (small magnitude of the torque ends up going inward instead of spinning the bolt).

 

[Infinia]

new low profile and stubby 3/8" ratchets 72T-QR extra chrome
side view compares against Kobalt 17 mm sockets

 

[Strouty]

I have been severely slacking on my posts, but don't worry I never stopped buying tools. These came in the other day and I happened to think about taking a picture.

 

[chrisnazzy]

Those look nice. Where did you get them from?

Sent from my SM-G930P using Tapatalk