Spacecataz
Active member
- Joined
- Dec 20, 2016
- Messages
- 31
An easily configurable, perfect 1/8 scale replica, of the much loved HF 44" roller box. Comes in a variety of versions and colors. Flavors currently not supported, you weirdo. Measurements are 133.3 ✕ 59.3 ✕ 106.4 mm or roughly 3x4x5.
Their are currently 4 versions being worked on. The first (pictured above) is the "Bench" version I've modified to hold baking soda or silica to keep moisture out of my socket drawer. It could also easily be modified to be used as:
-small parts storage
-coin bank
-small Bluetooth speaker
-hide a key
The "Bench" version is exactly like it sounds. No handle, no casters, like it was being mounted in a bench or work table. A good choice where drawer or storage space height is a concern.
The "Display" version has the casters, the handle (detachable) and a tiny rubber mat on top. The "Display" version is hollow inside like the "Bench" version (1/4" wall thickness for manly men) and is meant to be a slightly fancier model, and where overall height isn't a concern.
The "Collector" version has the "Display" version additions, but non-hollow with fully functioning drawers. Meant more for the man who misses his box at work or on vacation, or just wants a desk knick-knack.
The 4th Version is a trade secret for the moment.
My modified bench is being printed as I type. I'll upload pictures when the print is fine tuned.
Picture of the back of my "soda box".
Picture of the casters being worked on.
Just thought I'd share my next 3D printing project. If this is in the wrong section, my apologies to the mods. Once all the .mdl files are done and tweaked for printing, I may sell these at some point if there is enough interest.
Their are currently 4 versions being worked on. The first (pictured above) is the "Bench" version I've modified to hold baking soda or silica to keep moisture out of my socket drawer. It could also easily be modified to be used as:
-small parts storage
-coin bank
-small Bluetooth speaker
-hide a key
The "Bench" version is exactly like it sounds. No handle, no casters, like it was being mounted in a bench or work table. A good choice where drawer or storage space height is a concern.
The "Display" version has the casters, the handle (detachable) and a tiny rubber mat on top. The "Display" version is hollow inside like the "Bench" version (1/4" wall thickness for manly men) and is meant to be a slightly fancier model, and where overall height isn't a concern.
The "Collector" version has the "Display" version additions, but non-hollow with fully functioning drawers. Meant more for the man who misses his box at work or on vacation, or just wants a desk knick-knack.
The 4th Version is a trade secret for the moment.
My modified bench is being printed as I type. I'll upload pictures when the print is fine tuned.
Picture of the back of my "soda box".
Picture of the casters being worked on.
Just thought I'd share my next 3D printing project. If this is in the wrong section, my apologies to the mods. Once all the .mdl files are done and tweaked for printing, I may sell these at some point if there is enough interest.
