Show your new tool arrivals

[Distrophe]

I recently received the free 12A sawzall 6509-31 for buying $100+ in blades. [emoji106]


Sent from tablet on Tapatalk

 

[Mike.ASC]

I recently received the free 12A sawzall 6509-31 for buying $100+ in blades. [emoji106]


Sent from tablet on Tapatalk

How did you manage that ?

 

[PureLeaf]

Because Ryan won't let user's control their own posts for editing, deleting, etc

 

[lugnut71]

Wish those Carlyle wrench sets included 13 and 15mm

 

[cliftonbros89]

Got a Dynabrade DA


Snap On oil pressure tester
Snap On hose pick
Bondus hex key


Martin flare nut wrenches 15/16" - 1 1/2". Got 2 sets, one for the service truck and one for the shop box. Work awesome for hydraulic lines and hoses. Especially in tight areas. Got them from my Matco guy.

 

[Strouty]

I like those Martins, I have been looking at them for a while, but I haven't been doing enough hydraulic stuff to justify them yet. I am just itching for a reason to buy them.

 

[isuhunter]

How do you like them I got a set too am very pleased with them so far.

I haven't used them but my 3 year old was throwing them around the garage and they held up well. Haha


Sent from my iPad using Tapatalk

 

[Duster346]

Wish those Carlyle wrench sets included 13 and 15mm

I certainly agree with you. They do offer the 13x15 separately however.

 

[Howard07]

Yes, from NAPA. They are in the real deals flyer until March 31st.

The 5 pc.metric set is item number LDBZW5S, and is $84.49.
The 4 pc. SAE set is item number LDBZW4, and is $59.99.

Thanks I appreciate the info!

Sent from my LG-H910 using Tapatalk

 

[toolmutt]

Wish those Carlyle wrench sets included 13 and 15mm

I certainly agree with you. They do offer the 13x15 separately however.

Go into the store before 9 am on the second Saturday of the month and it's 30% off. That's what I did.

 

[NoahG]

1-1/2" SK combo, pre- Ideal. On clearance at an old ACE for $15!


Sent from my iPhone using Tapatalk

 

[4Kings]

Birthday gift from wife, been wanting one for awhile.

 

[MattVette89]

I ordered this on eBay the other day and it arrived today...Basically useless but I wanted to fill the set out



Out shopping today with the wife and we had to stop at Menard's. This Flexzilla hose and reel setup was on clearance for $49.00. Looking forward to trying it out after all of the positive feedback on here.

 

[FOCUS.FREAK]

I got this bad boy today. Got a matching boot on the way.




Sent from my iPhone using Tapatalk

 

[Dan_s_young]

Snap on 117TMM

 

[d.mcfarland]

 

[lugnut71]

hey Duster346, can you give me some measurements of the length of those Carlyle zero offsets ? thanks

 

[bert1913]

http://www.e-rigging.com/quarter-inch-Cable-Cutter
made in japan

 

[Duster346]

hey Duster346, can you give me some measurements of the length of those Carlyle zero offsets ? thanks

22x24--17 1/4"
17x19--16"
16x18--16"
12x14--13"
8x10--9 1/4"

HTH's

 

[zktk01]

Got these today.

 

[vertguy]

Needed these for rewiring an oven and it should make stripping the 8 gauge wire a piece of cake.

 

[02Xterra]

First order from Cripe!


Sent from my VS986 using Tapatalk

 

[zktk01]

Cripe never ceases to amaze me how many good deals they have.
You can never have enough clamps.

 

[pstemari]

Saw mrpete222 using one of these in YouTube and it was so cute that I just had to buy one:





I do make a lot of smaller items so the size is convenient.

Sent from my Nexus 6 using Tapatalk

 

[Jliddle]

Sockets on sale for this month. Picked up a set of 3/8" metric semi deeps, traded my old 1/4" deep/shallow metric for new set. Also picked up this bogo. 1/2" drive, 10-24mm and 1/2-1 1/2". Deal was too good to pass up.

 

[K-Dog]

After much debate and hem and haw I settled on the Snap-On Cable hose clamp pliers to replace my broken A.P.'s

Have not used them yet but I have two jobs with radiators going back in them this week and next week.

 

[02Xterra]

Cripe never ceases to amaze me how many good deals they have.
You can never have enough clamps.

So many great deals on there! Those .045" cutoff wheels were $24 for 25.. What ***** is before I bought those sets I paid about $3/ea at Lowes the other week. More clamps came back in stock so I've got 4 more 36" and 2 24" on the way!

Sent from my SM-T700 using Tapatalk

 

[cliftonbros89]

I like those Martins, I have been looking at them for a while, but I haven't been doing enough hydraulic stuff to justify them yet. I am just itching for a reason to buy them.

They are pretty nice. But they are definitely pricey. I'd bought a few sizes awhile back. But after using those then finding a few other spots where other sizes would've been ideal I just told him to get me more. Great hold. Good length. I really like them. Figure I might get at least 5/8"-7/8" for at least the shop so I have basically a full set.

 

[Wamsutta]

After much debate and hem and haw I settled on the Snap-On Cable hose clamp pliers to replace my broken A.P.'s

Have not used them yet but I have two jobs with radiators going back in them this week and next week.

The working end is 1/16" thicker that the previous Mayhew models. I found a spot in my engine compartment where that 1/16" felt like a super fat Walmart shopper. The tunnel in the firewall where the two heater hoseS go through. By themselves would not be so bad, but the A/C line that goes to the evaporator is right above those two hoses. The older model May 28640 and 28650 would squeeze in there, but not the new model 28680.

 

[fireeqpsrv]

Sent from my iPhone using Tapatalk

 

[alexigtivr6]

Couldn't turn down this deal. All brand new and 1/2 off retail. Apprentice kid got metric tools too but is a AME (a&p) apprentice. Selling offf all his metric stuff.

 

[tvtaurus]

Well, I Finally picked one of these up. It came in the mail yesterday; has Williams, bluepoint, Proto, SK, and craftsman, ALLEN, and crescent tools in it.
This is a surplus Aviation tool kit. Anyone have an idea on when this kit would have been used?

 

[IMStuner]

Yep, I was naughty again.

These are on sale until the end of the month and my local warehouse finally got a couple sets in. Going to try these in the hobby shop as I have the SO double box end metric wrenches at work and they are quite bad ***.

Do they make a metric set?


Sent from my iPhone using Tapatalk

 

[yamaha0343]

Picked up just a couple things from the clearance bins at Northern Tool. The Tekton long nose pliers were $2.99 a piece and look pretty decent.

 

[WWheeler]

Another example of this thread costing me money. SuzukiGS750EZ's post a few weeks back got me seriously looking at the GearWrench 84 pc Master Torx & Hex set, and when I found it currently combined with the 36 pc torx set in a BOGO at NTXTools I jumped.

I initially assumed the 36pc set was all duplicates and I figured I'd probably just sell it, and for the most part it is, but there are a couple bits the 36pc set has that the 84 pc didn't, so I'm keeping them at least.

 

[nczo6]

I scored some bogo gearwrench stuff from ntxtools too, the mid length metric sockets and crows feet set. Havent gotten them yet though.

 

[Heavy Metal Doctor]

yet another light...this one for the 14.4 rechargeable batteries.

 

[ChrisFox]

Never much of a woodworker but needed to try it out.

 

[TM98]

Well, I Finally picked one of these up. It came in the mail yesterday; has Williams, bluepoint, Proto, SK, and craftsman, ALLEN, and crescent tools in it.

This is a surplus Aviation tool kit. Anyone have an idea on when this kit would have been used?

Where did you purchase this?

 

[4Kings]

It's too bad Irwin got ahold of those Marples Blue Chip's. I have a set of older Blue Chip's that were made in England and they a damn nice for the price I paid.