To avoid these ads, REGISTER NOW!

Wren's 2car Mechanic Shop

wren57

Well-known member
Joined
Jan 13, 2016
Messages
92
Moved in a few weeks ago, it's 19'6" wide x 20'6" deep. Wasn't much when I got it:

qrbryv.jpg


Got the RaceDeck FreeFlow XL down and all my junk moved in and somewhat organized:

ayn1uq.jpg


Could barely park one car in it as it sat:

1607mrm.jpg


Moved a few things into the house and made room for the daily driver:

2ikwjyq.jpg


Still wasn't happy about it. Way too much STUFF in the garage and not nearly enough workspace. Got 5 4' dual T5 fixtures installed, cleared some stuff out, relocated trash cans to fenced in sideyard, got some shelving and rearranged so all my workbenches are on the right side. Lots of room now.

2mri0t3.jpg


Will get some more pics as time/weather permits.
 
Last edited:
To avoid these ads, REGISTER NOW!
OP
W

wren57

Well-known member
Joined
Jan 13, 2016
Messages
92
Got a picture tonight with both cars loaded in:

2w2qa0m.jpg


The BMW is about 2" from the wall.
 
OP
W

wren57

Well-known member
Joined
Jan 13, 2016
Messages
92
Changed my spark plugs tonight. Took my time, got it done in about 90 minutes.

2w50pxi.jpg
 
To avoid these ads, REGISTER NOW!

Jarhead0408

Well-known member
Joined
Apr 1, 2012
Messages
5,740
Location
Who knows?
Okay, my OCD is kicking in...

What are the two sets laid out on the bench? The blue one looks like a master torx/e-torx set. Looks like a Neiko set to me. What about the red set?

Thanks in advance!
 
OP
W

wren57

Well-known member
Joined
Jan 13, 2016
Messages
92
Thanks for the kind words. I have done some work in my unfinished basement to turn it into a woodshop, think I'm going to post those photos in here as well. They might get more action than the garage since it required a good bit more creativity.
 
OP
W

wren57

Well-known member
Joined
Jan 13, 2016
Messages
92
Quite a few changes to the layout and a LOT of work done on the BMW. Changed basically all the suspension and braking components. Can't wait to get it on the ground and aligned. Can't get one bolt out, still have a few ideas in mind.
 

Attachments

  • IMAG1093.jpg
    IMAG1093.jpg
    149.2 KB · Views: 10
  • IMAG1092.jpg
    IMAG1092.jpg
    123.4 KB · Views: 10
  • IMAG1116_1.jpg
    IMAG1116_1.jpg
    134.2 KB · Views: 15
  • IMAG1118_1.jpg
    IMAG1118_1.jpg
    144.2 KB · Views: 13
  • IMAG1120.jpg
    IMAG1120.jpg
    126 KB · Views: 14
  • IMAG1123.jpg
    IMAG1123.jpg
    138.3 KB · Views: 12
  • IMAG1130.jpg
    IMAG1130.jpg
    140.8 KB · Views: 16
To avoid these ads, REGISTER NOW!
Top Bottom