Show your new tool arrivals

[maxwage]

Stopped in at local indoor flea market the other day on a whim on lunch, and scored these beauties! Best part, $13.91 for all 3!!

This was the same booth I bought the 25$ Wissota bench grinder a couple months back.



Sent from my iPhone using Tapatalk

 

[blind]

That's got to be a YOU ****

 

[Fedwrench]

Can someone post a better picture of the new? two piece snap on hose pick set posted a ways back. I can't figure what the blade on the left side is shaped like.

Thanks,

 

[maxwage]

That's got to be a YOU ****

Right place at the right time!!! Always wanted some Kant clamps, never knew how expensive they were new!


Sent from my iPhone using Tapatalk

 

[mtnkid85]

Not a big tool purchase but ive found these Makita 1/4 hex to 3/8 wobble drive adapters to be about as good as it gets. $4 at hd. Coo Japan. #B-35075

I use those little guys all the time! Pairs nicely with the TD170.
And actually Makitas impact socket sets are quite nice too which include the adapter for ~$15.

 

[blind]

Right place at the right time!!! Always wanted some Kant clamps, never knew how expensive they were new!


Sent from my iPhone using Tapatalk

Just don't ruin them by using box end wrenches as a cheater. The sides will stretch and crack. I've also seen the ends of the threads pop off

 

[chrisnazzy]

Can someone post a better picture of the new? two piece snap on hose pick set posted a ways back. I can't figure what the blade on the left side is shaped like.

Thanks,

Here you go.

Sent from my SM-G930P using Tapatalk

 

[Fedwrench]

Thanks soo much for the quick response & hose pick pictures.

I'm liking the non pointy ends.

 

[mlum6969]

those picks are nice, but sometimes you need it to be a little pointy.. i'd rather have one that's pointy and one that's not pointy..

 

[Strouty]

Thanks soo much for the quick response & hose pick pictures.

I'm liking the non pointy ends.

They are very nice, except they don't have them in green, now my drawer looks like Christmas.

 

[Mazdaratti3]

They are very nice, except they don't have them in green, now my drawer looks like Christmas.

Yeah I've been waiting for them to come out with green as well so I don't have to buy second set when they do...

 

[MattVette89]

those picks are nice, but sometimes you need it to be a little pointy.. i'd rather have one that's pointy and one that's not pointy..

https://store.snapon.com/Soft-Grip-Hose-Picks-C681665.aspx

 

[ItsNemo]

Got these today...

For popping off Honda / Acura door linkage.

Those look almost exactly like their exhaust hanger pliers. I wonder if you could use the two interchangeably?

 

[d.mcfarland]

No, size is way different.

 

[Strouty]

Yeah I've been waiting for them to come out with green as well so I don't have to buy second set when they do...

My driver just warranties the red stuff for green when it is available. That way the color doesn't stop the sale and I end up getting what I like in the long run.

 

[Finky198]

A Driver did that once for me I had to warranty an orange dead blow ball peen and he happily gave me a red one. I asked and I think it worked out better because he stocks more of the red anyway. Some of the guy are great others are not so bright. I ordered black hard handle pry bars once to match an existing set from another dealer, he called me and said they came in when I get on the truck they were green. I refused to buy them and he gave me this look like... I had to order those. Well that not my problem...

 

[vintage nut]

Snap-on drivers really seem to vary
I've got two within the area I'm in. One is absolutely incredible to deal with. The other I've heard nothing good about.

No prizes for guessing which one has the newer and nicer truck, and gets most of the local business

Sent from my MotoG3 using Tapatalk

 

[cliftonbros89]

Davco filter wrench from Matco


Couple Matco lights. Work good. Both are nice and bright. Big one can be mounted on that clap or on a pistol grip. It's rechargeable. But there's also a version available that uses the Matco power tool batteries.

 

[KnurledNut]

Ampro T40692. (yeah, i laughed at first too...)
6-32mm. 75 degree offset.
Included tool roll.
Made in Taiwan by Bestir to DIN specs.
The finish is very good and similar to Toptul water satin.
Found on Amazon for $32. (Currently $120.)

 

[LXCam]

^^^^ damn those look identical to my Stahlwille stable 20 set. WTF?

 

[K-Dog]

Those look almost exactly like their exhaust hanger pliers. I wonder if you could use the two interchangeably?

Maybe if the exhaust was teeny tiny.
These things are for reaching up inside of doors to pop the linkage. If I can remember I will take a pic of the two of them next to each other.

 

[zendigital]

Got a new BluePoint YA4000B Automotive Test Kit. It covers both pressure/vacuum testing and bleeding all in one kit.

 

[mlum6969]

looks exactly like the mityvac with a different badge..

 

[Strouty]

looks exactly like the mityvac with a different badge..

It is.

 

[davethorik]

Couple small goodies today, a Milwaukee 6' tape measure keychain and a Lenox folding jab and utility saw that takes sawzall blades. Feels pretty solid, we will see.

 

[ItsNemo]

Maybe if the exhaust was teeny tiny.
These things are for reaching up inside of doors to pop the linkage. If I can remember I will take a pic of the two of them next to each other.

That would be great to see.

 

[Finky198]

Couple small goodies today, a Milwaukee 6' tape measure keychain and a Lenox folding jab and utility saw that takes sawzall blades. Feels pretty solid, we will see.

I have the Lennox saw it's held up well as do their blades. Enjoy....

 

[OCD]

Picked up some wobble sockets today,

Freebie,

I also won a fat bike in a draw!! Just have to put it together!!

 

[bert1913]

#1 https://www.amazon.com/gp/product/B00FJT0304/?tag=atomicindus08-20

#2 https://www.amazon.com/gp/product/B017Y7VJPQ/?tag=atomicindus08-20

#3 https://www.amazon.com/dp/B013ONAZ2M/?tag=atomicindus08-20

sad news, i think i'm running out of things to buy

 

[DrBaker]

Snap On striking pry bar set

 

[Wamsutta]

Picked up some wobble sockets today,

You won't regret it. Those are the very best and they still turn even when leaned over close to 90 degrees.

 

[HanShotFirst]

I put this under the garage sale thread, but it was a Craigslist grab. HF used to sell these and then they stopped. I think they were around $189 at HF, but these days they're available at Grizzly for $295. This one is essentially brand new. Had a little rust spot on the tables which I cleaned up quite easily. Other than that, one small scratch on the motor housing...as far as I can tell the guy bought it maybe sharpened a few tools and then it sat in his shop for years. No perceivable wear on the stones.

I paid $30

 

[MattVette89]

Freebie,

I also won a fat bike in a draw!! Just have to put it together!!

That's on my list next week, already told my dealer

I wouldn't do much with the bike...

 

[OCD]

You won't regret it. Those are the very best and they still turn even when leaned over close to 90 degrees.

They would have been handy on the weekend, had a spot that needed one, I couldn't get a socket with a universal on it into the tight spot... Took me 20 min with a half wrench!!

I got a great deal too, retail on them was $1079 Can, I paid $590...

 

[OCD]

That's on my list next week, already told my dealer

I wouldn't do much with the bike...

It's a pretty nice bike!!

Safety first!!

 

[1Garageman]

I put this under the garage sale thread, but it was a Craigslist grab. HF used to sell these and then they stopped. I think they were around $189 at HF, but these days they're available at Grizzly for $295. This one is essentially brand new. Had a little rust spot on the tables which I cleaned up quite easily. Other than that, one small scratch on the motor housing...as far as I can tell the guy bought it maybe sharpened a few tools and then it sat in his shop for years. No perceivable wear on the stones.

I paid $30

You really ****!!!!!!!!!!

 

[02Xterra]

Birthday gift from my parents.. And the 26mm socket is for my mtn bike

Sent from my VS986 using Tapatalk

 

[K-Dog]

That would be great to see.

The ones on the left are for the door linkage, and the ones on the right are for exhaust.

A significant size difference. They are not interchangeable on any car that I am aware of.

 

[Skin]

Couple recent second hand purchases. The light is actually really nice.

 

[Bighead38]

Picked up some wobble sockets today,

Freebie,

I also won a fat bike in a draw!! Just have to put it together!!

It's a pretty nice bike!!

Safety first!!

I would love to have that bike.