Found a deal on craigslist? - List Here!

[cdeer001]

Craftsman 150 Bench Top Drill Press - $100 (Adsamstown, MD)
https://frederick.craigslist.org/tls/6143786404.html
Craftsman 150 Bench top Drill Press that is excellent condition. Mfg'd in early 60's and is heavy duty and as solid as cast iron and steel can be, no plastic here!
I have it mounted on a cart with casters but can easily be removed if you prefer, It works great and will last a lifetime. I am willing to consider any reasonable offer.

 

[Shiftless]

Another great deal there! A reasonable offer around these parts would be TWO hundred dollars.

 

[cdeer001]

Craftsman 1/4 HP grinder - $10 (Laurel, MD)

https://washingtondc.craigslist.org/mld/tls/6143659090.html

Looks like it needs some stones & some love.

 

[kbkna]

Kennedy 7 piece tool box set Nashville area
https://nashville.craigslist.org/tls/6130558838.html

 

[Tundruz]

Free-An old Sears Air compressor, no hoses. Compressor is 1/2 HP, listed at 2.8CFM at 40 psi.
San Francisco, CA Bay Area
https://sfbay.craigslist.org/nby/zip/6128866554.html

 

[Shiftless]

Am I just overly cautious, or does the heavy rust visible near the TOP of the tank indicate that it is too dangerous to use? I can only imagine what the bottom is like...

 

[nmantas]

Looks like surface rust to me but it is just a picture so who knows how bad it is.

 

[cdeer001]

Craftsman Drill Press - $40 (Silver Spring, MD)

https://washingtondc.craigslist.org/mld/tls/6148138884.html

This is a older craftsman drill press, it is small in size but very heavy and works well. Drill press is 10 inch and 1/2 hp of power, 5 speed with 1/2 inch chuck.
$40.00 obo

 

[cdeer001]

Craftsman drill press - vintage - $150 (upper NW DC)

https://washingtondc.craigslist.org/doc/tls/6147687417.html

Craftsman drill press - c. 1960 Model 103.23140 Cast iron, machined steel floor model. Good condition. Four speed pulleys; 1750 rpm motor @ 6.7 amp.

 

[cdeer001]

Craftsman 24" Jig Saw Model #103.23440 - $50 (Clinton, MD)

https://washingtondc.craigslist.org/mld/tls/6148532082.html

Sears Craftsman 24" Jig Saw Model #103.23440 from the 1950s when you had a separate motor to power all your tools. This listing is for the saw only - no motor is included. Still works great! Overall length 38", throat is 24" long, and the plate is 16" square. Asking $50 OBO.
Terms are cash only.

 

[bubinga]

Nice 1/2 HP Block,
https://pittsburgh.craigslist.org/tls/6148935951.html
Pittsburgh CL East Liberty, $29.00!!
Just not a good time for me, Hoping a GJ member gets it.
Hopefully a non Block Owner, "Your first time"

 

[nmantas]

Large Jobox on-site tool box 698990 for $250 near Detroit:

https://offerup.com/item/detail/280023741/

https://www.zoro.com/jobox-jbst-strag-cabnt-60-18-inwx30-14-ind-1-698990/i/G8541732/

 

[larryq]

Here's a vintage Boice-Crane drill press for $85 in Moraga CA:

https://sfbay.craigslist.org/eby/tls/6149459492.html

 

[larryq]

Same seller is offering this nice looking Paramo vise (made in England) for $45, also in Moraga CA:

https://sfbay.craigslist.org/eby/tls/6149423699.html

 

[Shiftless]

Harbor Freight folding trailer. FREE

Oakland CA

https://sfbay.craigslist.org/eby/zip/6150886011.html


BTW: The Paramo vise Larry mentioned this morning was gone. I called right away but it was already claimed.

 

[bubinga]

Harbor Freight folding trailer. FREE

Oakland CA

https://sfbay.craigslist.org/eby/zip/6150886011.html


BTW: The Paramo vise Larry mentioned this morning was gone. I called right away but it was already claimed.

Thank You, When I need a Trailer.

 

[larryq]

Harbor Freight folding trailer. FREE

Oakland CA

https://sfbay.craigslist.org/eby/zip/6150886011.html


BTW: The Paramo vise Larry mentioned this morning was gone. I called right away but it was already claimed.

Ugh, sorry to hear it.

 

[bubinga]

Nice us general red tool cart, pittsburgh. Looks good, $100.00.
https://pittsburgh.craigslist.org/tls/6151998932.html



Sent from my MotoG3 using Tapatalk

 

[bubinga]

Ugh, sorry to hear it.

Can't believe the trailer is still up. Hmmmmm........., what would it cost me to drive to California?

Sent from my MotoG3 using Tapatalk

 

[Tundruz]

Free-Radial Arm Saw. I can't tell but looks like a C'Man
SAn Francisco, CA Bay Area
https://sfbay.craigslist.org/sby/zip/6152202668.html

 

[larryq]

Older Milwaukee drill press for $50 in Walnut Creek CA:

https://sfbay.craigslist.org/eby/tls/6151868408.html

 

[cdeer001]

Harbor Freight / US General 56" bottom box $600 (SPRINGFIELD, VA)
https://washingtondc.craigslist.org/nva/tls/6153730948.html

 

[impulse922]

https://sanantonio.craigslist.org/tls/6134088147.html

60? Gallon speedaire compressor for $400

Lot of compressor for the buck.

 

[catalytic]

Cleveland
$200
Vintage bullet style welder on a cart with big old school dials

Just saw this -- this has to be one of the most awesome looking welders ever made... On of you guys should pick this up just to stare at it.

https://cleveland.craigslist.org/tls/6159591387.html

 

[macgee]

Kennedy Tool Box & 2 Waterloo Roll Away Tool Carts - $100 (San Fernando Valley, CA)

Don't normally post these but two matching roll aways in fair to good shape for $100 for all three is not too bad plus it comes with a Budweiser girl.

"For sale are two Waterloo rolling chests and a Kennedy hand held tool box.

One of the Waterloo chests does not have a sliding cover for the bottom area. The other chest has a Budweiser girl poster attached to the back."

https://losangeles.craigslist.org/sfv/tls/6159575188.html

 

[MissileBear]

Vintage Working Foote Burt Dual Spindle Drill Press - $300 (Waterloo)

https://rochester.craigslist.org/tls/6161632533.html

If I had the space for this, I'd already be en-route. What a monster - 2000+ lbs, turn of the century goodness! There is probably $300 in scrap cast iron alone in this thing.

 

[LoveOldIron]

Vintage Working Foote Burt Dual Spindle Drill Press - $300 (Waterloo)

https://rochester.craigslist.org/tls/6161632533.html

If I had the space for this, I'd already be en-route. What a monster - 2000+ lbs, turn of the century goodness! There is probably $300 in scrap cast iron alone in this thing.

Don't think I can take that one apart and throw it in the back of the Jeep.

 

[Strouty]

I have a 1970s four head drill press like that, I only paid $150 for it though.

 

[red]

Vintage Working Foote Burt Dual Spindle Drill Press - $300 (Waterloo)

https://rochester.craigslist.org/tls/6161632533.html

If I had the space for this, I'd already be en-route. What a monster - 2000+ lbs, turn of the century goodness! There is probably $300 in scrap cast iron alone in this thing.

Wow!
It's a work of art.
Amazing how much better it looks without the safety cages.
Probably need a forklift to put it back together.

 

[Tundruz]

Free-Air Compressor
https://sfbay.craigslist.org/sby/zip/6165626178.html
San Francisco, CA Bay Area

 

[I_know_Nothing]

Just received a call and scheduled a time to come.
The first person arrived almost 4 hours late, she told him everything is already gone. The first person's phone number was a Sacramento number and did not come on the agreed time so she screened for nearest to her local numbers and called me. She was tempted to give the person who offered 50 pounds of Tide soap a call before me.

https://sfbay.craigslist.org/eby/tls/6163471375.html

 

[gtodoc]

Just received a call and scheduled a time to come.

The first person arrived almost 4 hours late, she told him everything is already gone. The first person's phone number was a Sacramento number and did not come on the agreed time so she screened for nearest to her local numbers and called me. She was tempted to give the person who offered 50 pounds of Tide soap a call before me.



https://sfbay.craigslist.org/eby/tls/6163471375.html

You ****! Damn great find!!!


Sent from my iPhone using Tapatalk

 

[nmantas]

I hate to make this comment again but that SF area craigslist is unreal. My free section has things like: 14 empty pizza boxes: would be great for doing crafts or recycling

 

[gtodoc]

My area is the same way here is a recent posting in my area

Junk pile

https://winchester.craigslist.org/zip/6166308760.html




Sent from my iPhone using Tapatalk

 

[trijeff]

Just received a call and scheduled a time to come.
The first person arrived almost 4 hours late, she told him everything is already gone. The first person's phone number was a Sacramento number and did not come on the agreed time so she screened for nearest to her local numbers and called me. She was tempted to give the person who offered 50 pounds of Tide soap a call before me.

https://sfbay.craigslist.org/eby/tls/6163471375.html

Nice! Just outbof curiosity how long after the posting did you contact her?

 

[EOC_Jason]

So you get the vises and bench grinders?!?!?! OMG post pics!

Just received a call and scheduled a time to come. The first person arrived almost 4 hours late, she told him everything is already gone. The first person's phone number was a Sacramento number and did not come on the agreed time so she screened for nearest to her local numbers and called me. She was tempted to give the person who offered 50 pounds of Tide soap a call before me.

 

[Tundruz]

Free-Compressor with GE Triclad capacitor motor.
San Francisco, CA Bay ARea
https://sfbay.craigslist.org/eby/zip/6167628394.html

 

[ScottsGT]

Vise for $40 just outside of Columbia SC area.

https://columbia.craigslist.org/tls/6161464367.html

No idea of the brand.

 

[Tundruz]

Free-Lumidor Tool Box
SAn Francisco, CA Bay ARea
https://sfbay.craigslist.org/eby/zip/6167918976.html

 

[I_know_Nothing]

Nice! Just outbof curiosity how long after the posting did you contact her?

I first noticed the posting Tuesday early evening and made the inquiry. She called me yesterday after 10am. She called me again today after 9am to make sure I was still coming today and request if I can come an hour earlier as it might rain. She said there has been monetary offers. I was not sure how to respond to this. Then I remember what she said about using the vise to hang/dry clothes. I offered to install a new full size clothes rack. She said wonderful. I will be meeting her today. She is playing it safe as I have to go to a nearby place of business where her friend works to get her address. I have notice of late more frequently, this type of pseudo safety protocols. The first party arrived well after the business closed.