Show your new tool arrivals

[T_Roze]

super shiny

Those look great! Promo deal at all!?


Sent from my iPhone using Tapatalk

 

[hautpot]

oh forgot to mention the 3/8" i've had since last year, that was the prior gen torque wrench. The 1/2 and 1/4 has the updated software and much quicker to start up than the 3/8"

 

[hautpot]

I don't think your typical Snap-On dealer will have these on promo, I paid almost full price for the torque wrenches. These are mainly sold to industrial customers. There are two on ebay right now for about $500 and $600

 

[yuanzichen]

One tool among the other dozens I received last week.


Sent from my iPhone using Tapatalk

 

[Ruger_556]

super shiny

I don't think your typical Snap-On dealer will have these on promo, I paid almost full price for the torque wrenches. These are mainly sold to industrial customers. There are two on ebay right now for about $500 and $600

I have one of those, nice torque wrenches

 

[TURNA]

 

[bob_the_builder]

What is that tool used for?

 

[TURNA]

It is a short shank normal handle wide blade flat screwdriver mainly for farm equipment but I use it for Holley carburetors.

 

[trs71]

The New Snap-On Wide-Blade Screwdriver Is Perfect For Boats - Boating Magazine
http://www.boatingmag.com/new-snap-wide-blade-screwdriver-perfect-boats

 

[trs71]

I am surprised there are no flats on it for a wrench assist, but hey if it's no-slip fit- A+

 

[KnurledNut]

What is that tool used for?

Marine applications, such as upper and lower unit gearcase drain screws, that are notoriously hard to remove.
Replacement screws are sometimes offered as a socket cap screw to help with this issue.

 

[TURNA]

I use a longer shaft screwdriver for the lower units on outdrives and outboards.

I like the short shaft for carbs simply because it fits under the hoods easier.

 

[marius_nortje]

Got this for $115. I.m pleased

Sent from my LGLS990 using Tapatalk

 

[Dennis Leigh Henry]

Haven't been on this thread much lately.. but thought I would post these two. First is a flea market find for $3 and second is a $10 pawn shop find...

View media item 71059
View media item 71060
I already have a nice level in the basement shop.. need to see if one of my brothers wants this one.. The CL will go with my other blue handles....

 

[StefanWesdorp]

I found some Belzer screwdrivers.
This is the first time i see the blue ones. i think they are really rare

[/URL][/IMG]

I Have allot of double Screwdrivers and Hex Scredrivers. i will sell.

Stefan from the Netherlands

 

[neonlazer]

Ill be damned if I was going to let JH Williams get away with the last piece of my socket puzzle. Waited a few months for these! Note date of manufacturer is 4/22/17.

Sent from my SM-G930V using Tapatalk

 

[02Xterra]

Went to HD looking for some clamps that convert to spreaders.. Was planning to just buy 2 12" but for $5 more I could get deeper 12" clamps and two 6" as well.. Also found another Crescent USA made cutter and plier set. SK 3/8" 6mm from the socket of the month program

Sent from my VS986 using Tapatalk

 

[TURNA]

Picked up a 1/4 and 3/8 inch NOS set of Kobalt made in USA ratchets at a local junk store for 10 buxx.

I'm not sure if they are but the heads look identical to the USA NAPA's

 

[lightning02]

Picked up a 1/4 and 3/8 inch NOS set of Kobalt made in USA ratchets at a local junk store for 10 buxx.

I'm not sure if they are but the heads look identical to the USA NAPA's

Don't those have the same internals as a CM ratchet?

 

[ihateminimumwage]

Picked up a 1/4 and 3/8 inch NOS set of Kobalt made in USA ratchets at a local junk store for 10 buxx.

I'm not sure if they are but the heads look identical to the USA NAPA's

Don't those have the same internals as a CM ratchet?

Same QR 36 tooth guts as Danaher era Craftsman, NAPA, Allen, Armstrong, KD.

 

[dutchgray]

I found some Belzer screwdrivers.
This is the first time i see the blue ones. i think they are really rare

[/URL][/IMG]

I Have allot of double Screwdrivers and Hex Scredrivers. i will sell.

Stefan from the Netherlands

Wow nice, almost never see the screwdrivers now here in the UK, a few on eBay but not many.
I would definitely buy some of the duplicates.

 

[JacksoNRolyaT]

Tool haul from yesterday compliments of the snap on student program. Figured I'd make use of that page one last time before my account expires since I graduated.

 

[rshadd]

I picked up a new set of hex wrenches today...

Bondhus 20399 Ball End L-Wrench Double Pack with BriteGuard and GoldGuard Finish

 

[stormfront_marauder]

These came in a couple of days ago, the finish is stunning and the ratcheting action sound made a grumpy old coworker smile. I'm really impressed of the way the splines grip a 12 point engine bolt.

 

[TURNA]

These came in a couple of days ago, the finish is stunning and the ratcheting action sound made a grumpy old coworker smile. I'm really impressed of the way the splines grip a 12 point engine bolt.

OOOO those are sweeeeeeeeeeeet!!!

 

[Project_shadow]

Got some witte picks and vim tools assorted hex/Allan/torc/etorx/security torx bit set to replace my craftsman set,

 

[upgrading]

Those Matco/Witte picks look good.

 

[Project_shadow]

Those Matco/Witte picks look good.

They feel pretty comfortable, I haven't used them yet, expensive little pricks though

 

[cliftonbros89]

Ill be damned if I was going to let JH Williams get away with the last piece of my socket puzzle. Waited a few months for these! Note date of manufacturer is 4/22/17.

Sent from my SM-G930V using Tapatalk

I bought a 3/4" SAE and metric U.S.A. Williams sets last year about this time. It took a little longer for them to arrive as well. Like they're made after so many orders. Over all I've been happy with them. Price wasn't bad either.

 

[BikerDad]

At the beginning of the month, the local(ish) Woodcraft had their "garage sale."

Here's what I came home with:

First up, the Mirka CEROS Demo Station. A Mirka CEROS sander (inside the Systainer at the moment), premium vac, short hose, the stand itself, and an assortment of Mirka Abranet and other sanding discs.

Second pic is a miscellany of odds and ends. Two Kreg Automax bench clamps, some Bosch Multi-tool blades, a dust collection shroud for one of my routers, some clamp bar protectors, a replacement pad and some sanding discs, and a couple of drawer pulls.

All in all, quite happy, the whole kit and kaboodle cost me $425. I'll be turning the demo station into a dust collection cyclone unit using the vac and a Dust Deputy.

 

[ihateminimumwage]

Cornwell Metric 1/2" impacts (with an SK in place of the missing 16mm). I had no clue the cart mount rail was included, and really like it.
Milwaukee 1/2" Mid-torque. Got it after wrestling with the heavy *** High-torque under the ol' lady's 4runner pulling the transmission for a clutch job.
CAT branded Snap-on 3/8" metric universal sockets, and an Ernst rail to put them on.

 

[Finky198]

Project shadow how much did that vim set run you if you don't mind me asking.
I was using my torx bits today and I'm in need of a bunch.... to say the least.

 

[ADSR]

Cornwell Metric 1/2" impacts (with an SK in place of the missing 16mm). I had no clue the cart mount rail was included, and really like it.
Milwaukee 1/2" Mid-torque. Got it after wrestling with the heavy *** High-torque under the ol' lady's 4runner pulling the transmission for a clutch job.
CAT branded Snap-on 3/8" metric universal sockets, and an Ernst rail to put them on.

Very nice! I really want that mid torque!

 

[ihateminimumwage]

Very nice! I really want that mid torque!

2" shorter and almost 2lb lighter. Convinced myself to pull the trigger with the Memorial Day 20% off eBay coupon. Feels about like my IR composite air impact with a battery swinging at the bottom.

 

[kiatech]

Been drooling over these for a few years...

 

[Mr. Roboto]

Milwaukee SAE/Metric sets of nut drivers. They feel a bit cheaper than I had hoped they would - the handles feel awful hollow.

 

[Project_shadow]

Project shadow how much did that vim set run you if you don't mind me asking.
I was using my torx bits today and I'm in need of a bunch.... to say the least.

260$, cheaper than the gearwrench set I asked about, more stuff in it too

 

[PelicanPines]

Project shadow how much did that vim set run you if you don't mind me asking.
I was using my torx bits today and I'm in need of a bunch.... to say the least.

260$, cheaper than the gearwrench set I asked about, more stuff in it too

I found that VIM MMS64 set on amazon for $142 bucks. https://www.amazon.com/Mechanics-Master-Set-Hex-Torx/dp/B00UBXHYSM

 

[Finky198]

Thanks guys I was like 260 But 140 seem very fair

I'm guessing you bought that on the truck?

 

[04chase]

Some recents, new triple socket organizers, now i have a spot for my mid length. Hoping for 1/4" and 1/2" as well. Nee s.o. led pocket light and my recent endeavor to m12 . Still waiting on the hacksaw fuel w 6.0 ah . They had a promo and i had a 10% coupon so they came out to about 48% off.


Sent from my SM-G930T using Tapatalk