Show your new tool arrivals

[04chase]

Openong my hd truck repair this will be a necessary tool


Sent from my SM-G930T using Tapatalk

I got this for a better deal than one eould think, plus free cummins software. I like it so far.

Sent from my SM-G930T using Tapatalk

 

[ihateminimumwage]

Some recents, new triple socket organizers, now i have a spot for my mid length. Hoping for 1/4" and 1/2" as well. Nee s.o. led pocket light and my recent endeavor to m12 . Still waiting on the hacksaw fuel w 6.0 ah . They had a promo and i had a 10% coupon so they came out to about 48% off.

Make sure to pick up a boot for that Milwaukee ratchet from the Snap-on man. The YA905 is a perfect fit. Keeps the grime out and keeps the mechanism from scratching anything.

 

[NoahG]

Needed some picks and the 537 was a good price


Sent from my iPhone using Tapatalk

 

[Project_shadow]

Thanks guys I was like 260 But 140 seem very fair



I'm guessing you bought that on the truck?

I found that VIM MMS64 set on amazon for $142 bucks. https://www.amazon.com/dp/B00UBXHYSM/?tag=atomicindus08-20

Yup, needed them then, he happened to be there, now the only one in the shop with the right size Allan head

 

[Finky198]

I bought the impact hex and torx sets from HF to have the larger size for that reason they have held up well. but my daily use stuff is just getting worn out.

 

[jeffmoss26]

Some recents, new triple socket organizers, now i have a spot for my mid length. Hoping for 1/4" and 1/2" as well. Nee s.o. led pocket light and my recent endeavor to m12 . Still waiting on the hacksaw fuel w 6.0 ah . They had a promo and i had a 10% coupon so they came out to about 48% off.

Sent from my SM-G930T using Tapatalk

Just my luck - that flashlight is on sale in green or red but not orange!

 

[IdahoMan]

Found this: https://www.bonanza.com/listings/6-...ought&utm_medium=OfferMailer&utm_source=email

I don't know if it's any good, but it isn't chinese and only 10$. I received it.

 

[mike528]

Got these Friday. Just waiting on a text that my ratcheting screwdrivers are in. And picked up the shear from the school auction out of the old ag shop.

 

[StefanWesdorp]

More Belzer,
New in the box.

[/URL][/IMG]

[/URL][/IMG]

Some More Blue Belzer

[/URL][/IMG]

 

[ryan20021982]

A visit from the Sunex fairy

1/2" SAE & Metric
3/8" SAE & Metric
Master Hex kit w/ hex, torx, triple square

View media item 71108

 

[cdeer001]

USA Craftsman NOS 14 pc SAE set. 1/4 - 1 5/8

 

[Wrapitinbacon]

My 5/8 won't fit on the tray

 

[Strouty]

That's not good!

 

[Wrapitinbacon]

Ya I know, I think my socket is the problem not the tray.

 

[Snap_cap]

These came in a couple of days ago, the finish is stunning and the ratcheting action sound made a grumpy old coworker smile. I'm really impressed of the way the splines grip a 12 point engine bolt.

Wow, those are really nice. What sizes are included?

 

[kball]

Some NOS Craftsman from a co-worker. $20

 

[chrisnazzy]

A visit from the Sunex fairy

1/2" SAE & Metric
3/8" SAE & Metric
Master Hex kit w/ hex, torx, triple square

View media item 71108

Nice. IMO you just can't beat the quality and value of Sunex impacts sockets.

Sent from my SM-G930P using Tapatalk

 

[Finky198]

A visit from the Sunex fairy

1/2" SAE & Metric
3/8" SAE & Metric
Master Hex kit w/ hex, torx, triple square

View media item 71108

Nice enjoy I still need to pick up the Sae 1/2 myself.
Their swivel in 3/8 are very good for the money I've been very happy with all their stuff...

 

[Druck Press 79]

I am in the process of upgrading the contents of my tool chest, one pay packet at a time.

I've only used the Gedore once but I love it - very smooth action. Unfortunately these sets now come in a crappy plastic container instead of a metal tin.

These are brand new old stock Minimax spanners I found online.

 

[mike528]

Screwdrivers came in today, also got a boot for the m12 ratchet while I was there.

Anyone recommend a good bit set to go with these?

 

[zach540]

Just came in today, got some work to do.

 

[danscobra6]

Don't do Honda's everyday but when I do, no longer will I fight the crankshaft bolts.
IR 2235MAX
Honda socket
1/2" air hose
Milton V style high flow fittings
60 gallon Craftsman

 

[chrisnazzy]

Screwdrivers came in today, also got a boot for the m12 ratchet while I was there.

Anyone recommend a good bit set to go with these?

So the Snap-on bit set that comes in the little red case that fits right in there is the SDM400 or SDM410. Certainly hard to justify spending $189 on a screwdriver bit set.

My solution would be to order the PB900 plastic box from Snap-on for $15.45 and fill it with all of your own bits.

Sent from my SM-G930P using Tapatalk

 

[R_einan]

Used that 20% off eBay coupon to score a knipex precision circlip plier set. REALLY wanted to upgrade from the cheap replaceable tip units; and these are NICE!

 

[ultgar]

Grab and go set for use on the boat. Most of the tools in the set are Facom with "USAG branding".

 

[Jake C]

A visit from the Sunex fairy

1/2" SAE & Metric
3/8" SAE & Metric
Master Hex kit w/ hex, torx, triple square

View media item 71108

Nice, I recently purchased some too. Got some dewalt impacts too to go with them for my service truck.

 

[Contract_Pilot]

Picked this Skat Blast 960 DLX up at an estate sale for a great price Friday Afternoon..

I get to bring it home monday morning... Would not fit in the back of the H2 was close needed another 1/2" or it would be at its new home.

 

[Mark in Indiana]

I've been wanting a large belt/disk sander for a long time. Just picked up a 1977 Powermatic 30B, combination 6" belt/12" disk sander from an auction. At first glance, everything looks complete and in good working order. I plan to go through it, replace bearings and other items as needed.

Here's how it looked when I bought it.

 

[MattVette89]

I wanted to try the quick release version so I picked this up - THR72 1/4".

 

[dwasifar]

Okay, I know it isn't in the same class as what most of you guys are showing off, but this arrived today:

Sure, it's not a very prestigious brand, but isn't that a work of art? It looks like a piece of silverware.

 

[Chadwilliam1]

That is a good looking ratchet

Sent from my HTC6545LVW using Tapatalk

 

[Fedwrench]

Okay, I know it isn't in the same class as what most of you guys are showing off, but this arrived today:

Sure, it's not a very prestigious brand, but isn't that a work of art? It looks like a piece of silverware.

More like jewelry!! There's nothing wrong with Tekton. They make some very nice working class tools. Use it and let us know how you like it

 

[Bobcat753]

Grab and go set for use on the boat. Most of the tools in the set are Facom with "USAG branding".

Really nice set. A little too pricey for me at $570.

 

[NUTTSGT]

Picked up this compact bender up today at HF for a small U-bolt project. Apparently HF is putting these things on clearance, the local one didn't have any neither did the next closest store. I used a 20% coupon and with tax, out the door for under $35.



Unassembled out of the box.


A quick test on a few different types of materials.


Assembled bender. You can spot the safety (angle iron) which flips up to prevent the handle from flopping over accidently.

 

[1foxracing]

Lots of new stuff over the past month or so.

 

[dodge610]

Sears had it for $30.49 got it at K Mary for $18.49 on sale go figure.[emoji848]


Sent from my iPhone using Tapatalk

 

[ronald5256]

Something new off the snap on truck

Sent from my SM-G930F using Tapatalk

 

[ca90ss]

Picked up a little Wilton shop king vise at the flea market. One of the feet is broken off the base which I'll probably eventually fix but it's not a big deal as I bought it more for shelf art than to use.

 

[Fedwrench]

1FOXRACING: where did you get the Dewalt round head ratchets from? they look interesting......

 

[upgrading]

Also are the DeWalt double box wrenches NOS or New ?
I have them also, but I can't find any info on them.