Universal cord clamps?

[CajunMan89]

While replacing all those strain reliefs on my saws, I noticed that all three are missing the cord clamps and screws. I found this one online for Skil, but there are no screws: http://www.toolpartsdirect.com/bosch...ord-clamp.html

Would anyone know if there are universal ones available that fit Skil and Black & Decker, and also come with the screws? So far, that link is the only thing I can find that looks like the right part...but there are no screws.

 

[Richard Cranium]

Went to your link and got the old dreaded 404 dead link

 

[CajunMan89]

Went to your link and got the old dreaded 404 dead link

I guess they removed it for some reason, or I mad a typo...here it is. http://www.toolpartsdirect.com/bosch-2610364033-cord-clamp.html

They have so many brands and models of saws out there. I just hope they have some with screws somewhere that are a universal fit.

 

[RocketScott]

Have you tried eReplacement parts?

I doubt you're going to find a universal replacement. That would be too easy. You could make your own, just a little metal bar with enough packing under it to clamp the cord.

They might have not been put back in if the plastic that they screw into was stripped so you might end up having to replace the handles, or wherever the cord enters the tool.

 

[CajunMan89]

Have you tried eReplacement parts?

I doubt you're going to find a universal replacement. That would be too easy. You could make your own, just a little metal bar with enough packing under it to clamp the cord.

They might have not been put back in if the plastic that they screw into was stripped so you might end up having to replace the handles, or wherever the cord enters the tool.

I think I found the right parts list for my 552, but I'm not 100% sure because it has HD...and it's 5525 instead of 552. http://www.ereplacementparts.com/sk...50a-612-circular-saw-parts-c-130_160_846.html

Sorry for my incompetence, I'm just not used to researching parts. They do have the 5650 listed, however the parts don't look like mine. Perhaps it's a newer model shown? It's looks like the clamp might fit the others...

 

[tarbellb]

https://www.mcmaster.com/#cord-grips/=191fo73

Might work? Unless you are trying to screw it down.

 

[CajunMan89]

https://www.mcmaster.com/#cord-grips/=191fo73

Might work? Unless you are trying to screw it down.

No, those won't work. I'll keep my fingers crossed and try these with the screws. http://www.ereplacementparts.com/cable-clip-p-38923.html