2manytools
Well-known member
Probably because the new model is available. I've seen several promotions online that include a free impact, being the 2763-20. I'm surprised they didn't drop the prices sooner
2017 HD deals/sales/clearance thread
- Thread starter cheechi
- Start date
Probably because the new model is available. I've seen several promotions online that include a free impact, being the 2763-20. I'm surprised they didn't drop the prices sooner
I like this explanation. TY!
FYI that dremel kit is $189...not $1.89
For the image upload from a smart phone you need to edit the picture, rotate it 90 degrees, save it, then rotate it back to the correct orientation and it will upload properly. Total PITA.
Hm. Silly. Sorry in advance to everyone, you'll have to l2read sideways if I continue to post.
Good luck down there
byoungblood
Well-known member
Good deal but very odd drawer arrangement.
Whiskey Tango Foxtrot
Well-known member
JetskiMark
Member
- Joined
- Nov 23, 2015
- Messages
- 13
The Home Depot has the 48-22-5125 25 foot magnetic tape measure, buy one, get one free. $19.97 online. Free ship to store.
http://www.homedepot.com/p/Milwaukee...5125/303212010
http://www.homedepot.com/p/Milwaukee...5125/303212010
They bottom out at $110 if your store has them on clearance. With the new model out I don't know why all of them aren't on clearance. I got some a few months ago. Don't really need the insane torque of the new one since I don't work on semi's
jdmallday1090
Well-known member
- Joined
- Jul 5, 2014
- Messages
- 59
Thanks! I just ordered one... well two
yea reports of milwaukee impact wrenches from like april or so in some areas. i had one store drop it then here, looks like theyre all dropping it now. as noted, i think ppl who got them in april said they didnt do a full drop.
the other benefit of the new model is it may be able to eliminate the need for a torque wrench... supposedly you can rig it to your phone and limit the torque on the whole gun... i dunno check the reviews and theres maybe more info now but about a month ago it didnt seem like anyone who actually used an impact had got their hands on one yet to fully describe the feature's limits and uses < or do a proper test with a decent torque wrench >
but at $100 or whatever i will be getting an old one just to have one.. cant beat it
there was a smaller fuel brushless impact wrench too just about a month or so ago.. very limited to which stores had it but it disappeared en masse at $80.00. it is useless compared to the full size one tho. youre best bet with the small stuff is to just use your impact driver with an adpater vs wasting cash on the little one IMO
the other benefit of the new model is it may be able to eliminate the need for a torque wrench... supposedly you can rig it to your phone and limit the torque on the whole gun... i dunno check the reviews and theres maybe more info now but about a month ago it didnt seem like anyone who actually used an impact had got their hands on one yet to fully describe the feature's limits and uses < or do a proper test with a decent torque wrench >
but at $100 or whatever i will be getting an old one just to have one.. cant beat it
there was a smaller fuel brushless impact wrench too just about a month or so ago.. very limited to which stores had it but it disappeared en masse at $80.00. it is useless compared to the full size one tho. youre best bet with the small stuff is to just use your impact driver with an adpater vs wasting cash on the little one IMO
Last edited:
drwheels
Well-known member
Vacuum at .03 here. Ridgid cordless compressor at.03.
maustarman
Member
- Joined
- May 9, 2017
- Messages
- 18
Strolling around my HD I saw this ...
Of course there weren't any in there.
I went to get dome stuff from the lumber department and in a corner I found the Ryobi ... of course there wasn't any reason for it to be there but there it was ...'
Took it to the cashier to figure out the price and the cashier told me he couldn't do it because of this ...
He said o sku ... can't sell it ;(
Sent from my iPhone using Tapatalk Pro
I'M A BELIEVER!!
I was back to HD today... I went back to the leaf blowers etc ...the clearance label was gone and I saw the box from the other day still there so, I went and checked the SKU and it showed $0.01 but 0 items available.
So, I went to the check out with the big box and paid for it.
The cashier took my money and gave me a receipt but she told me that she needed to check something and called her manager...
After 15 minutes of back and forwards with the manager she opted for letting me walk out with my 1 Penny purchase [emoji2]
Sent from my iPhone using Tapatalk Pro
I found this a while back. After searching for it and looking into it I realized it is mislabeled in the PCA. The actual bar code matches the cutoff wheel exactly. There must have been a mistake when the dremel was added to the PCA that they grabbed the wrong info (for the cutoff wheel). The dremel at that price does not exist
wastedcosmonaut
Well-known member
- Joined
- Jan 16, 2016
- Messages
- 130
Well, they exist at a penny ����
drwheels
Well-known member
milwauke 18 volt bandsaw at $115 0452421999969 18 volt hackzall at $50.045242200436
Last edited:
Do you have a SKU or upc?
Ole Slewfoot
Well-known member
I was thinking about a corded one, but...might rethink.
My store is bad about not putting Milwaukee on clearance though.
Garage openers
Thanks! I've been wanting to replace an old door opener since I bought my house. Picked up the Chamberlain Belt drive at my local HD!
yep i confirmed that phenomenon with the dewalt organizer boxes. some stores would show it in yellow and it would hit when filtered for clearance but others wouldnt. if you punched in just the sku it would show as a low price but it would not show up when filtered for clearance. it would say 'clearance' but it wouldnt be yellow... the pca's filter button seems to only show yellow tags only in my limited experience...
drwheels
Well-known member
Those dewalt boxes show a penny now. They have been gone for months around here.It is crazy about the yellow clearance stuff.Only one area store had 18 volt ridged compressor at .03 pricing.
4v shane
Well-known member
the 56 inch 10 drawer blue husky boxes dropped to $200.30 .......
The elusive markdown toolbox. Now that I need another box I can never find one. I like the blue Huskies at least the ones in the stores around here they are made in Canada and not China. Thanks for the post. Now I just have to go on a snipe hunt.
Last edited:
Whiskey Tango Foxtrot
Well-known member
While you are looking, keep an eye out for this box.
Attachments
maustarman
Member
- Joined
- May 9, 2017
- Messages
- 18
I checked online and it seems my store has 2 of them ... the online app shows the $498 price ... but will go down there to check on the store price ...
Sent from my iPhone using Tapatalk Pro
jumpstart
Well-known member
Would love to find one of these. Would you have the SKU?
Wasting your time, they will be the 498 price.
61scout80
Well-known member
Speaking from experience? The computer in my local store shows them in stock in a couple stores about an hour away. I've got nothing better to do today...
If it shows in stock online they are not clearing them out at that store.
When an item goes on clearance the website switches to "Not sold in stores/this store"
Yep.
61scout80
Well-known member
When I go to the home Depot website from my phone or home pc and select those stores it says only available online.
It was the in store terminal at my local store that said the far away stores had some @$55.00. 1 store had 1, the other had 3.
Not trying to be difficult, I appreciate the advice from more knowledgeable folks. If there is a better than 0% chance at that deal I'll take a ride
Actually, when the Milwaukee tool chest tops went on clearance several months ago. I’ve ordered them online for in store pickup which showed that they were in stock that day and got it for the clearance price of $50. So might be worth a shot. You’ll never know if you don’t check.
61scout80
Well-known member
I checked the first store. They had 3, marked at $520.** and discounted on 5/11/17.
I asked an employee to check the price, he pulled out his personal cell phone and went to depot's website. The site showed it for $498.
I asked to check the store system, he asked why so I showed him the picture in the thread. It boggled his mind, he seemed angry, but we went to check. I pulled it up on the store terminal and it showed the $520.** price. So the in store clearance price was higher than online.
Second store that showed one in stock is on the way home, I'll stop in... I
Did he pull it up on the price check app on the pc or did he just pull up the Home Depot website? Most employees have no clue how to pull up the price check app on their computers.
61scout80
Well-known member
I went to the PC at the contractors desk and searched the model number. Is there another way??
That’s the correct way. Some employees still search their website even though it’s different prices in store.
If I can't get on the PCA, I just go to the checkouts and ask the cashier to punch in the SKU to find out the in-store price. The employees are clueless and always try to check the website and argue with me if I try to explain why that won't necessarily be correct.
61scout80
Well-known member
So the second home Depot that had the tool chest in stock also had it for $520.00 with a sticker date of 5/12/17. I wonder why these two stores are holding out?
Thanks for clearing that up. I'd hate to have to drive back there again tomorrow!
Thanks for clearing that up. I'd hate to have to drive back there again tomorrow!