Princess Auto deals

[PhantomEB]

Buddy's shop crane that I can see living here.....needed a new ram. Picked up the 8ton air over hydraulic ram for 110$ on sale. Cheaper than the full hydraulic ram and way faster!

 

[Burgerkong]

From RFD (tonight!):

Princess Auto Friends & Family Shopping Night. This Sunday December 10th @ 5 - 7 p.m.

Discounts are as follows:
40% off Hand Tools and Safety
40% off Surplus
30% off Everything else

There are no invite cards, we are inviting our Friends & Family guests through word-of-mouth.

 

[rmsg0040]

Well that *****, cause I start work in the next hour

 

[Burgerkong]

Ended up spending quite a bit, will have to go back when they open as some of the prices were incorrect. BTW those fuel cans are the BEST.

 

[old__man]

BTW those fuel cans are the BEST.

Make sure you get the nozzle for those and the wrench, definitely the wrench. DS tactical sells the wrench online and Princess sells the nozzle.

 

[foghorn1966]

Thanks for the heads up BurgerKong, Had to show the door guy your post then I was in....

Me.... Propoint balljoint press kit, Propoint 5 LB slide hammer kit, & one of their killer shock absorbing ice chippers.

 

[speedpower]

You are lucky as not all shop open to public for Friends & Family Shopping Night.
My location is for employee and stuff's friend and family only.

 

[PharaohXJ]

Thanks burgerkong Coquitlam let me in 5 minutes before closing


Sent from my iPhone using Tapatalk

 

[buckwheat_la]

You are lucky as not all shop open to public for Friends & Family Shopping Night.
My location is for employee and stuff's friend and family only.

Our area is invite only too. For how much I spend there sometime it kind of pisses me off

 

[rmsg0040]

Titan 90 tooth ratchets on sale

1/4 by 6
3/8 by 12
1/2 by 16

I was tempted by the price, but handles feel slippery

 

[PharaohXJ]

The handle is just for show it’s anodized aluminum can’t imagine what will happen to it


Sent from my iPhone using Tapatalk

 

[JohnnieMo]

Great power cord reel at this price. I have one.

 

[rmsg0040]

Titan long handle ratchets on sale, they say 72 tooth? Don't know for sure

 

[knobby]

Just ordered these.
https://www.princessauto.com/en/det...=ieR3aYdpki9YNnSdEB2gblCZBJBMcW3Rpsdhiyt2pcU=

Mayhew 60025

 

[bcexplorer]

Tempting.

Im looking for a tool cart, I noticed that they are clearancing those double sided ones they have. Does anyone know if they are replacing it with something? Preferably harbour frieghtish or international?

 

[knobby]

Just ordered these.
https://www.princessauto.com/en/det...=ieR3aYdpki9YNnSdEB2gblCZBJBMcW3Rpsdhiyt2pcU=

Mayhew 60025

Down to $28 hell of a buy

 

[rmsg0040]

breaker bar 3/8, can add an extension in the end to increase length

https://www.princessauto.com/en/detail/3-8-in-dr-x-15-in-breaker-bar/A-p8380453e

 

[PharaohXJ]

breaker bar 3/8, can add an extension in the end to increase length

https://www.princessauto.com/en/detail/3-8-in-dr-x-15-in-breaker-bar/A-p8380453e

I don’t think it’s meant to add an extension to it the leverage will shear the square nut
I think it is meant to be used AS AN EXTENSION by adding a socket on 1 end and a ratchet on the other


Sent from my iPhone using Tapatalk

 

[rmsg0040]

I bought one and will be using it for serpentine belts

 

[PharaohXJ]

Got this long plier set from the Langley store on clearance for just over 20$ looks exactly the same as my gearwrench ones seem to be made in the same factory they even have the same moulding over the handles


Sent from my iPhone using Tapatalk

 

[JohnnieMo]

Has anyone bought one of the MIG welding carts? I need one and I'm waiting for a sale to pick one up. This is the one I am looking at.

 

[SlowRacecar]

Got this long plier set from the Langley store on clearance for just over 20$ looks exactly the same as my gearwrench ones seem to be made in the same factory they even have the same moulding over the handles https://uploads.tapatalk-cdn.com/20180327/16da5650e5169cd868267dfa7ac6938c.jpg[/IMG


Sent from my iPhone using Tapatalk[/QUOTE]

Did they have many sets left? Worth the drive out there?

 

[SlowRacecar]

Found them. They are on sale for $23.63, not clearance. Thanks.

 

[The Cobbler]

Found them. They are on sale for $23.63, not clearance. Thanks.

anything that ends in $0.03 is a clearance item and not likely to be seen again.
That from a buddy that works there .

 

[JohnnieMo]

anything that ends in $0.03 is a clearance item and not likely to be seen again.
That from a buddy that works there .

Every once in a while they also have the 3 cent discounts. Basically anything ending in a 3 gets 30% off or something like that. Being clearance explains it.

 

[PharaohXJ]

Did they have many sets left? Worth the drive out there?

Not sure but I always call with the sku they will check the floor for you


Sent from my iPhone using Tapatalk

 

[PharaohXJ]

Ok so I take it back looks very similar to gearwrench but not the same quality.

The fulcrum points seem to be similar but the joints are different, the handles thickness on the GEARWRENCH are thicker and not as bendy as the PP but the PP has a wider jaw


Sent from my iPhone using Tapatalk

 

[PharaohXJ]

I am shopping for a 1/2 ratchet flex

Any experience with this guy





Sent from my iPhone using Tapatalk

 

[PharaohXJ]

I am shopping for a 1/2 ratchet flex

Any experience with this guy





Sent from my iPhone using Tapatalk

Even looks very similar to this one from Napa


Sent from my iPhone using Tapatalk

 

[rmsg0040]

I been waiting for the 1/4 version to go on sale since the beginning of they year, hopefully soon

 

[PharaohXJ]

I been waiting for the 1/4 version to go on sale since the beginning of they year, hopefully soon

I had them check their price history and since launch they never went on sale

I ll wait for a friends and family event


Sent from my iPhone using Tapatalk

 

[SlowRacecar]

The propoint ones are the same too

 

[rmsg0040]

Low profile 1/4 and 3/8 Titan sets on sale for $20 starting April 3 as well as 40% off those extra long propoint 72 tooth ratchets

 

[PharaohXJ]

Low profile 1/4 and 3/8 Titan sets on sale for $20 starting April 3 as well as 40% off those extra long propoint 72 tooth ratchets

I am waiting for the Titans each store is getting between 4 and 5 sets

I have the propoint long ratchets not a huge fan of them they are quite flexy

I am comparing the powerfister locking ratchet which sells at 59,99 to a gearwrench flex ratchet which sells for 51.99


Sent from my iPhone using Tapatalk

 

[shawndp]

Low profile 1/4 and 3/8 Titan sets on sale for $20 starting April 3 as well as 40% off those extra long propoint 72 tooth ratchets

Excellent news! One of my techs is big on Titan tools - got to tell him to keep a lookout!

 

[rich_p]

Low profile 1/4 and 3/8 Titan sets on sale for $20 starting April 3 as well as 40% off those extra long propoint 72 tooth ratchets

I picked up the 1/4 set today at $20 in whitby. They had about 30 sets. They had 2 3/8 sets left also. I'm impressed with the set it should help me get into tight spots working on japanese/german machinery.

Richard

 

[PharaohXJ]

Not yet in Bc


Sent from my iPhone using Tapatalk

 

[PharaohXJ]

I have the 3/8 powerbuilt low profile metrics along with gearwrench 3/8 that is shallower than the inculded ratchet

I ll try to get me the 1/4 set too


Sent from my iPhone using Tapatalk

 

[PharaohXJ]

Did they have many sets left? Worth the drive out there?

Just checked today they have at least 25 sets


Sent from my iPhone using Tapatalk

 

[MikeF2316]

Found them. They are on sale for $23.63, not clearance. Thanks.

anything that ends in $0.03 is a clearance item and not likely to be seen again.
That from a buddy that works there .

I sauntered down to my local Princess Auto (Mississauga) this morning to grab a set of these. They had 7 or 8 sets left, now only $16.03.

There was no sign of the Titan socket set that folks have been chit chatting about, does anybody have an SKU?