Looking For Craftsman Professional 12mm Wrench
- Thread starter PAN FRIED
- Start date
sberry
Banned
A Huskey is a close match. I bought a single for a missing one from Rickster here. Very good, was priced and shipped right.
There's Wanted section. You could also try posting there.
https://www.garagejournal.com/forum/forumdisplay.php?f=33
https://www.garagejournal.com/forum/forumdisplay.php?f=33
mikebaker1129
Well-known member
Maybe check Cripe and see what they have available?
Fedwrench
ALLIANCE MEMBER
Technically, that's a Craftsman Industrial wrench, not a professional version. there are minor differences between the two besides the name stamped. The beam shape was slightly more square on the industrial. The Craftsman Industrial series were some of the last wrenches the Armstrong factories cranked out for Craftsman and probably the best versions.
Unfortunately, aside from the people that scooped up the sets offered at sears outlets a few years ago, the wrenches weren't as widely distributed as other series. Good luck in your quest
Unfortunately, aside from the people that scooped up the sets offered at sears outlets a few years ago, the wrenches weren't as widely distributed as other series. Good luck in your quest
1foxracing
Well-known member
This was my set of Craftsman professional, I believe they were made by SK and I gave them away a couple years ago.
Cripe might have the USA Kobalt or KD that are just about identical.
Sent from my SM-G930P using Tapatalk
mikebaker1129
Well-known member
Here is a similar Armstrong https://cripedistributing.com/produ...ric-12mm-6-point-full-polish-combo-wrench-usa
$4 or an Allan brand for $3.50
$4 or an Allan brand for $3.50
Super Sport
Well-known member
I believe both of those are a shorter length. I know the KD are as I have sets of those.
kythri
Well-known member
52-012 in mikebaker1129's post is not only a short wrench, it's a 6-point.
52-212 is the long, 12-point.
Here's one on eBay:
https://www.ebay.com/itm/Armstrong-...814945&hash=item23a41699a4:g:DGwAAOSwLS5bMtwV
There's a few other, search for "Armstrong 52-212" and you can find them. Closest thing to a Craftsman Pro or Craftsman Industrial, if you can't find either of those.
The Craftsman Professional part number was 009-45991, but that part number has been co-opted by lobster-claw Asian production wrenches.
The Craftsman Industrial part number looks like it's 9-23570.
Shamrock Supply and MSC both appear to have that part number, but from experience, Shamrock is a drop-shipper, and doesn't stock the Craftsman stuff I've tried to order from them in the past, sending me an email telling me the part is out of stock/no longer available. MSC might be different.
52-212 is the long, 12-point.
Here's one on eBay:
https://www.ebay.com/itm/Armstrong-...814945&hash=item23a41699a4:g:DGwAAOSwLS5bMtwV
There's a few other, search for "Armstrong 52-212" and you can find them. Closest thing to a Craftsman Pro or Craftsman Industrial, if you can't find either of those.
The Craftsman Professional part number was 009-45991, but that part number has been co-opted by lobster-claw Asian production wrenches.
The Craftsman Industrial part number looks like it's 9-23570.
Shamrock Supply and MSC both appear to have that part number, but from experience, Shamrock is a drop-shipper, and doesn't stock the Craftsman stuff I've tried to order from them in the past, sending me an email telling me the part is out of stock/no longer available. MSC might be different.
Looks the same length to me. At least in the matte.
Sent from my SM-G930P using Tapatalk
Attachments
Last edited:
Fedwrench
ALLIANCE MEMBER
Yes, those two are the same length but, those are at least an inch shorter than the full polish craftsman industrial wrench he's missing. They're standard length wrenches, not long pattern.