rockinacummins
Well-known member
Nice haul! Lots of good stuff in there. I think you’ll like the UVEX Bionic faceshield. I like how much closer it sits to my face (I think it offers more protection).
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Rogers954
Well-known member
Those are neiko's I looked at sunnex but these had a bigger set for a lower price, needed those for a steering box job on my truck removing lines in a tight spot, they are built better than I expected for $38 on amazon.
Truth be told I was trying to round out an order to get free shipping, but didn't really need anything else from zoro so I started cruising the site and stumbled onto the face shield, I didn't have one and I am doing more metal cutting and grinding these days so I thought it would be a good investment, that is of course after I did a quick search on here to see what guys had to say about the bionic (pretty much what I always do when considering a new tool check here first)....
Rave reviews so I went ahead and added it. Wish I had the mask a couple of months back I was under the truck using a cut off wheel to take a pitman arm off that was basically welded on with rust. even good safety glasses have there limits and getting blasted in the face with sparks isn't exactly my idea of fun.
I'm going to be cutting a lot of angle aluminum on my miter saw here soon (thus the new blade pictured) so that mask is gonna come in handy.
Rogers954
Well-known member
Also to whom ever posted that form a funnel in another thread my hat is off to them Ive only had that thing for a couple of weeks and I have already used it 3-4 times. In the house, wife jammed the disposal, don't know how many times I have to tell her stop putting potato skins down the sink 
and three times in the garage draining fluids in tough to reach spots that would have made a big mess. If you don't have one get one lots of uses for that ingenious gadget.
and three times in the garage draining fluids in tough to reach spots that would have made a big mess. If you don't have one get one lots of uses for that ingenious gadget.Old-Soul
Well-known member
Thanks!
Are they a black chrome finish or are them "impact grade"?
I wouldn't mind replacing my el-cheapo set.
Xmoonstompx
Well-known member
Jarhead0408
Well-known member
Nice looking wrenches.
marineman
Well-known member
Dewalt DWMT19263
Why do they go in order all the way then the last 2 change to 20/22 and 21/23?
Alpine4x4
Well-known member
Thank you. On sale at Amazon.
I don't know. It's a small annoyance.
Dewalt DWMT19263
Did not know Dewalt had dbe offsets. Those look nice!
Negen
Well-known member
Dewalt and Milwaukee seem to be pushing into the hand tool market more and more lately anyone know if the Milwaukee and dewalt have the same OEM?
Sent from my G8141 using The Garage Journal mobile app
Here's a link to the Dewalt website. https://www.dewalt.com/products/hand-tools
Here is the 2018 catalog https://www.dewalt.com/~/media/dewalt/files/catalogs/dwcat18.pdf
Check out Mark Fox's Youtube channel too Dewalt lesser known mechanics tools.
Rogers954
Well-known member
They look like black chrome but they are impact grade
Sent from my iPhone using The Garage Journal mobile app
Gears_call
Well-known member
MattVette89
Well-known member
Haven't posted recently. I picked these up this week. The Snap-on sockets complete my series (add on sizes not normally in the sets). A locking extension because I wanted to try them out, and some flush cutters which are awesome for zip ties and wires.
Attachments
Odd-job
Well-known member
1foxracing
Well-known member
Thanks, that's me. I don't really pimp my own YouTube channel here.
Performance Over Style
Well-known member
Picked up an engine support, 1/2” split beam, utility knife and 3/8 & 1/4” t handles....
Sent from the moon
Sent from the moon
Picked up an engine support, 1/2” split beam, utility knife and 3/8 & 1/4” t handles....
Sent from the moon
Which spinner handles are those?
Performance Over Style
Well-known member
Rogers954
Well-known member
Dewalt DWMT19263
Wow the finish on those dewalts is impressive
Sent from my iPhone using The Garage Journal mobile app
Old-Soul
Well-known member
thanks!
Bobcat753
Well-known member
Recently got a Snap On EEDM596F. Absolutely an awesome multimeter. Also bought the largest Apache Case from Harbor Freight to store the EEDM596F and my Fluke 88V.
Also keeping with the pelican like cases and foam is my new 3/4" Drive Socket set. Snap On 434HDC.
Also keeping with the pelican like cases and foam is my new 3/4" Drive Socket set. Snap On 434HDC.
Attachments
Last edited:
Negen
Well-known member
In my never ending search for proto big dawgs I picked up j54116 12 point sae set.
I got a 10 piece tang through wood compo screw driver set for my brother for Christmas and some pliers from engineer pz-59 and pz-58
Proto j54116
Vessel tang through wood-compo 10 piece
Engineer pz-59
Engineer pz-58
I got a 10 piece tang through wood compo screw driver set for my brother for Christmas and some pliers from engineer pz-59 and pz-58
Proto j54116
Vessel tang through wood-compo 10 piece
Engineer pz-59
Engineer pz-58
Negen
Well-known member
Proto sae hex sockets
1/8 to 5/8
1/8 to 5/8
New dewalt grinder 13amp.... 4.5inch.... to go with my v28 and 8.5 metabo... for my welding class.... 210 mp...
looking for a pebble 4766 or any 47xx pebble hinged handle
looking for a pebble 4766 or any 47xx pebble hinged handle
Attachments
dodge610
Well-known member
Yeah, I was eyeing that big Vulcan cabinet but cheaped out and got the basic one for $30 with a coupon.
Let us know how that creeper works out, I've heard both good and bad.
It is all good... let me know how your 210 mp works out....
looking for a pebble 4766 or any 47xx pebble hinged handle
It's a good channel. I wouldn't have been interested in these DeWalt hand tools otherwise.
paulsomlo
Well-known member
Who makes the monster wrench extender?