To avoid these ads, REGISTER NOW!

Just for fans of knurling

T

tanukiboy

Well-known member
Joined
Dec 24, 2016
Messages
314
Location
Japan
Man, I really like knurling.

Not a big fan of mirror-finish chrome. Okay with satin chrome, rough sandcast, or gray industrial finish. But I just love knurling: the way it looks, the way it feels, and even the way it sounds --- knnnuuurrrling!

Favorite is the knurling on my Ko-ken ratchet handles...

View media item 90841
View media item 90842
View media item 90843
Share pictures of your favorite KNURLING!
 
To avoid these ads, REGISTER NOW!
M

mudflap

Well-known member
Joined
Sep 25, 2011
Messages
1,279
Location
cincinnati,ohio
Looks really nice... Im no fan of the slick chome.. but i work on alot of old beat up greasy equipment/ nasty hydraulics.. So my SKs come out alot, plus they are almost indestructible.. But i like the agressive knurrrling on those.
 
M

M6erfan

Well-known member
Joined
Dec 6, 2014
Messages
10,170
Location
'Merica!
tanukiboy said:
Man, I really like knurling.

Not a big fan of mirror-finish chrome. Okay with satin chrome, rough sandcast, or gray industrial finish. But I just love knurling: the way it looks, the way it feels, and even the way it sounds --- knnnuuurrrling!

Favorite is the knurling on my Ko-ken ratchet handles...

View media item 90841
View media item 90842
View media item 90843
Share pictures of your favorite KNURLING!
Click to expand...


I agree and can't add anything to what you already pointed out.
 
D

DFB

Well-known member
Joined
Sep 7, 2016
Messages
5,765
Location
Southern VT/Western Mass
Nice...another a fan of knurling here.

Old school styling to me.

Don't really care for the long and thin smooth handles lots of tools come with now.
 
E

eschoendorff

Well-known member
Joined
Feb 6, 2005
Messages
8,991
Location
Michigan
I like knurled, smooth, soft grip, hard grip... whatever. I can get along with almost anything on a decent toll. But my favorite knurling is on Proto stuff.
 
M

mr.lemons

Well-known member
Joined
Oct 24, 2017
Messages
2,191
Location
UK
Some Knurling from PB Swiss.

IMG_6081-2.jpg
 
E

eschoendorff

Well-known member
Joined
Feb 6, 2005
Messages
8,991
Location
Michigan
Granted, the Koken knurling is nicer. But here is some old Indestro, SK and a couple Proto for comparison. All pretty typical of American knurling I suppose...
 

Attachments

  • C13947E0-5C5F-4C63-907A-F1C0B47DD11A.jpg
    C13947E0-5C5F-4C63-907A-F1C0B47DD11A.jpg
    106 KB · Views: 246
P

PWC Repair

Well-known member
Joined
Dec 27, 2012
Messages
3,179
Location
Arkansas
I wish all my extension had a knurled section like that. I hate not being able to spin the extension between my fingers while holding the ratchet if my fingers are oily.
 
D

DFB

Well-known member
Joined
Sep 7, 2016
Messages
5,765
Location
Southern VT/Western Mass
mr.lemons said:
Some Knurling from PB Swiss.

IMG_6081-2.jpg
Click to expand...



Dude you made go dig around in my tool box for the first tool I ever made in machine shop class at least 30 years ago :lol:. Everybody got to step cut and taper a center punch on lathe from a steel rod stock, knurl it, heat and quench it.

Yup brings back an old memory :D
 

Attachments

  • knurl.jpg
    knurl.jpg
    60.4 KB · Views: 322
4

454ragtop

Well-known member
Joined
Mar 24, 2008
Messages
5,011
Location
Carver, MA
Apparently no one else is going to say it, so I will. Those are about the clunkiest looking ratchet heads I have ever seen. Are they that nice to use? Looks like they wouldn't fit in a lot of tight spots either. The knurling is nice though...…..
 
S

shanny19

Well-known member
Joined
May 24, 2014
Messages
1,209
Location
PNW
bsaint said:
Oh the Proto Big Dawg. Love that one.
Click to expand...

454ragtop said:
Apparently no one else is going to say it, so I will. Those are about the clunkiest looking ratchet heads I have ever seen. Are they that nice to use? Looks like they wouldn't fit in a lot of tight spots either. The knurling is nice though...…..
Click to expand...

I don’t think you know what you’re looking at
 
OP
T

tanukiboy

Well-known member
Joined
Dec 24, 2016
Messages
314
Location
Japan
454ragtop said:
Apparently no one else is going to say it, so I will. Those are about the clunkiest looking ratchet heads I have ever seen. Are they that nice to use? Looks like they wouldn't fit in a lot of tight spots either. The knurling is nice though...…..
Click to expand...

Both are fitted with removable Ko-ken quick spin adapters, which I mounted for the pictures because they are (you guessed it) knurled! :thumbup:
 
Last edited:
To avoid these ads, REGISTER NOW!
D

davethorik

Well-known member
Joined
Sep 14, 2013
Messages
4,992
Location
Norka, Ohio
Probably a challenge for you Tanukiboy to get Wright Tools in Japan, but the knurling on their newer ratchets is very interesting. It is unlike traditional pointy knurls. Shallow grooves cut into a smooth surface in a diamond pattern. It is not aggressive like SK knurling can be, but it still grips phenomenally.

Nowadays they only make it in 3/8 and 1/2. Their bigger ratchets are knurled too but I have never used a new one.
 
K

Kev442

Well-known member
Joined
Jan 15, 2009
Messages
5,386
Location
Wi
PWC Repair said:
I wish all my extension had a knurled section like that. I hate not being able to spin the extension between my fingers while holding the ratchet if my fingers are oily.
Click to expand...

I think even non knurling fans would learn how nice it is on extensions and appreciate it, it can save a buttload of time working in tight places without needing to swap a thumbwheel on.

Personally, the more knurling, the better on everything!
 
C

ChevyEFI

Well-known member
Joined
Sep 2, 2012
Messages
8,733
Location
Phoenix, AZ
SK handles work for me.

In Ko-Ken, I only have a thumbwheel ratchet; coined I guess. Super smooth and backdrag is nice; 45t I believe.

In the knurled spinners, Dad always had a 3/8 SO and is a diff. design than mine from the 90s. Their design spaces the wheel away from the driving ratchet. This makes it easier to grip. And the narrower edge makes it dig into the fingers more thoroughly.

I think your Ko-Ken spinners are the later design spaced away from the ratchet, but not Z-eal. Earlier Ko-Ken versions lacked spacing (as does the above linked Matco,) and IMO are inferior.
 
OP
T

tanukiboy

Well-known member
Joined
Dec 24, 2016
Messages
314
Location
Japan
ChevyEFI said:
I think your Ko-Ken spinners are the later design spaced away from the ratchet, but not Z-eal. Earlier Ko-Ken versions lacked spacing (as does the above linked Matco,) and IMO are inferior.
Click to expand...

The spinners are both Z-EAL, but the later design. I also recall reading here that the earlier Z-EAL spinners sat flush. I wonder if they might have offered a bit more clearance, but I don't have any of the earlier type to compare.

(Somebody here at GJ probably has both types, though, and may be able to provide an answer.)
 
F

fallenspirit123

Member
Joined
Dec 5, 2017
Messages
7
Thanks guys looks like I'm off to impulse buy those Ko-Ken ratchets! Anyone know any good sources for those knurled models? Don't recall seeing them on frankstools...
 
OP
T

tanukiboy

Well-known member
Joined
Dec 24, 2016
Messages
314
Location
Japan
fallenspirit123 said:
Thanks guys looks like I'm off to impulse buy those Ko-Ken ratchets! Anyone know any good sources for those knurled models? Don't recall seeing them on frankstools...
Click to expand...

If it helps, the model numbers are 3753NB (3/8") and 2753NB (1/4"). Even without the knurling, they're really nice ratchets!
 
G

GrayFlattop

Well-known member
Joined
Jan 18, 2018
Messages
1,040
Location
Chicago
tanukiboy said:
Actually, aren't the edges "reeded"? :pimpflash
Click to expand...

Yes - either by fine-blanking or via broaching (might also be referred to as splined). Coining is when you displace material thickness via stamping - pull a coin out of your pocket for an example.
 
C

ChrisLS8

Well-known member
Joined
Jan 16, 2015
Messages
1,964
Kev442 said:
I think even non knurling fans would learn how nice it is on extensions and appreciate it, it can save a buttload of time working in tight places without needing to swap a thumbwheel on.

Personally, the more knurling, the better on everything!
Click to expand...
I have koken extensions on my SK ratchet with OEM knurled sockets. Knurled all the things.

I want knurling on my cooking pans and dinnerware
 
A

anndel

Well-known member
Joined
Oct 28, 2015
Messages
3,270
Location
Hawaii, USA
Ok, you said knurling I thought you said curling
 

Attachments

  • Winter-Olympics-2018-Curling-table-919407.jpg
    Winter-Olympics-2018-Curling-table-919407.jpg
    42.3 KB · Views: 76
C

CR888

Well-known member
Joined
Feb 19, 2017
Messages
1,198
You get the impression with tools like Koken with good Japanese knurling they are out to produce the best possible tool for its purpose. They are happy to charge more and offer a product that's unique to their brand. To many ratchets and other chrome tools these days are generic copies of each other with 'cheap price' being what seperates them from each other. Knurling is one feature that can really improve function & user experience.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom