To avoid these ads, REGISTER NOW!

Crank Fab 30x56x12 Shop Build

Dr. Crankenstein

Well-known member
Joined
Dec 12, 2012
Messages
45
Location
Irvine, KY
After studying builds on here for years I can finally start my own build thread. Starting on a 30x56x12 metal building in Central Ky. Weather has not been cooperating so the builder has one day in so far. Weather is looking better this week and the building materials should be here on Tuesday.
 

Attachments

  • 67E4C82D-564F-440D-8708-AA2E4EC07E91.jpg
    67E4C82D-564F-440D-8708-AA2E4EC07E91.jpg
    19.4 KB · Views: 175
  • EDEB7D53-CAFF-460B-831F-54E12425EDED.jpg
    EDEB7D53-CAFF-460B-831F-54E12425EDED.jpg
    144.4 KB · Views: 332
  • C638C9DD-6B8C-4408-A055-226FC355A1E2.jpg
    C638C9DD-6B8C-4408-A055-226FC355A1E2.jpg
    145.1 KB · Views: 307
  • EE779231-53FC-4631-AD38-ECAE37D6C63C.jpg
    EE779231-53FC-4631-AD38-ECAE37D6C63C.jpg
    149.9 KB · Views: 361
To avoid these ads, REGISTER NOW!
OP
D

Dr. Crankenstein

Well-known member
Joined
Dec 12, 2012
Messages
45
Location
Irvine, KY
The building materials arrived today. The truck driver was a real piece of work. Destroyed my yard and seemed like he didn’t know what he was doing. Had to be pulled out a few times.
 
OP
D

Dr. Crankenstein

Well-known member
Joined
Dec 12, 2012
Messages
45
Location
Irvine, KY
Footer was poured on Wednesday with the studs for the building. I will get some pictures as soon as the weather clears back up. Was hoping t have concrete finished this week but rain came back sooner than expected.
 
OP
D

Dr. Crankenstein

Well-known member
Joined
Dec 12, 2012
Messages
45
Location
Irvine, KY
Pricing garage doors yesterday, I was originally planning on going with a insulated roll up door. Now I am looking at a panel door that follows the roof pitch. Any recommendations for garage doors? It seems like the insulated panel doors are quite a bit more than the roll up doors.
 

readhead

Well-known member
Joined
Dec 8, 2012
Messages
6,207
Location
Durango, Co.
When you are pricing doors be sure to tell them it is for a metal building. It makes a difference. Don't forget backing for the spring mount over the center of the doors.
 
OP
D

Dr. Crankenstein

Well-known member
Joined
Dec 12, 2012
Messages
45
Location
Irvine, KY
Got another break in the weather. The builder dug out the topsoil inside the footer, filled with gravel and laid down the plastic and the wire mesh. It’s looking like we are going to have nice weather early next week so hopefully we can get the floor poured.

7d6ed57d01e70033b650d4be9cc2f740.jpgda7995efdf1efe738903b3c996d47c41.jpg


Sent from my iPhone using The Garage Journal mobile app
 

Attachments

  • 7d6ed57d01e70033b650d4be9cc2f740.jpg
    7d6ed57d01e70033b650d4be9cc2f740.jpg
    989.5 KB · Views: 0
  • da7995efdf1efe738903b3c996d47c41.jpg
    da7995efdf1efe738903b3c996d47c41.jpg
    553.1 KB · Views: 0
OP
D

Dr. Crankenstein

Well-known member
Joined
Dec 12, 2012
Messages
45
Location
Irvine, KY
Spoke with the builder today. They are going to start putting the building this week after the concrete cures. I’m about to start ordering tools once the building is up. Still need to get doors, so far everybody I have spoke with about doors say they need to come out and look at the building to get a quote.


Sent from my iPhone using The Garage Journal mobile app
 
To avoid these ads, REGISTER NOW!
OP
D

Dr. Crankenstein

Well-known member
Joined
Dec 12, 2012
Messages
45
Location
Irvine, KY
Making some progress. Building is up, waiting on doors. We ran the waterline yesterday and had the meter installed today. When we purchased the property there was a trailer sitting where I am building the shop. There were a couple other trailers up closer to the road and another water meter in front of one of the trailers. We went to turn the water on to check for leaks at all of my connections in front of the shop. All of the connections looked good but the meter was rolling over like we had a leak. My wife started saying there was water in the yard. So I am looking for a leak where I know the water line goes through the yard. Then I see it, a stream of water shooting 3’ in the air, on the other side of the road... Apparently they had teed off of the water line supplying the trailer where my shop is and ran a line over to another trailer. Going to dig it up tomorrow and get it capped off. f8ca6c95781e790bded97d53c84fc1d1.jpg216604a9dcd84d350d2f57ed53350f91.jpg22c0d22080884bcedfbe16bf62b6f524.jpg


Sent from my iPhone using The Garage Journal mobile app
 

Attachments

  • f8ca6c95781e790bded97d53c84fc1d1.jpg
    f8ca6c95781e790bded97d53c84fc1d1.jpg
    774.9 KB · Views: 0
  • 216604a9dcd84d350d2f57ed53350f91.jpg
    216604a9dcd84d350d2f57ed53350f91.jpg
    1.1 MB · Views: 0
  • 22c0d22080884bcedfbe16bf62b6f524.jpg
    22c0d22080884bcedfbe16bf62b6f524.jpg
    856.6 KB · Views: 0
OP
D

Dr. Crankenstein

Well-known member
Joined
Dec 12, 2012
Messages
45
Location
Irvine, KY
Thanks, I’m pleased with the way the building turned out. The overhang is 4’. I really think it will help keep the weather off the front of the building and the doors. Also if I’m working in the shop and there is a light rain I can keep the doors open. If it feels decent outside I like to keep the doors open and not feel like I’m locked in a box. I used a local company that builds a lot of aviation hangers, not sure who he sources his buildings from to be honest.


Sent from my iPhone using The Garage Journal mobile app
 
OP
D

Dr. Crankenstein

Well-known member
Joined
Dec 12, 2012
Messages
45
Location
Irvine, KY
As you can see there is an abundance of downspouts on the front of the building. I am wanting to run them under the driveway and into the field on the other side of the drive. Should I run 4 lines separate or run some type of manifold across the front of the building and then one pipe going under the road? I’m not sure how deep I would need to be under the drive coming into the building for when I concrete later on.


Sent from my iPhone using The Garage Journal mobile app
 

ed_v

Well-known member
Joined
Sep 15, 2007
Messages
1,418
Location
Kentucky
Hello fellow Kentuckian,

That's a great looking building you got there. I wish I had overhangs like that on my shop.

Ed
 
OP
D

Dr. Crankenstein

Well-known member
Joined
Dec 12, 2012
Messages
45
Location
Irvine, KY
Hello fellow Kentuckian,

That's a great looking building you got there. I wish I had overhangs like that on my shop.

Ed



Thanks Ed! Having some rock brought in today to start bringing the drive up so it isn’t as steep getting into the building. I need to wash the floor so I can seal it. Been looking into the Ghostshield 4500 and 8510.


Sent from my iPhone using The Garage Journal mobile app
 
OP
D

Dr. Crankenstein

Well-known member
Joined
Dec 12, 2012
Messages
45
Location
Irvine, KY
Garage doors were installed today. The guy ordered the wrong doors so I had to wait for the correct doors to come in. Well the wife was home eating lunch on the back porch when guy brought the new doors to install. I guess he didn’t realize the wife was there because he starting telling the guy helping him about how he ordered the right doors and I just didn’t like them when they came in and he should have told me to shove the doors up my ***. I spoke with him on the phone after hearing about this. I had sent him a message asking if that was him picking up the wrong doors before he had started talking about them. Again the wife was eating and sent a message asking if they were picking them up so I sent him an message asking him. Well when he called to tell me that it was him over there I told him that my wife had asked if that was him getting the doors and that she was in the porch. I may try to throw little pieces into the conversation when he comes for me to pay. Then let him know he may want to watch his volume when talking about customers while on the job site. Idk.

10f988b88591d809b80b44d4aa8203ee.jpgaea75760dce082162a4bf81098eec0ff.jpg


Sent from my iPhone using The Garage Journal mobile app
 

Attachments

  • 10f988b88591d809b80b44d4aa8203ee.jpg
    10f988b88591d809b80b44d4aa8203ee.jpg
    852.4 KB · Views: 0
  • aea75760dce082162a4bf81098eec0ff.jpg
    aea75760dce082162a4bf81098eec0ff.jpg
    526.3 KB · Views: 0

PSDEng

Well-known member
Joined
Feb 5, 2013
Messages
107
Location
Bellefonte, PA
I’d call the guys supervisor or the sales rep. That’s super unprofessional for him to do that. Doors look good btw.
 
OP
D

Dr. Crankenstein

Well-known member
Joined
Dec 12, 2012
Messages
45
Location
Irvine, KY
Haven’t gotten a lot done to the shop in the last couple of weeks. I take a trip to NC twice a year to ride supermoto with a group of friends from around the US so I was spending some time prepping for that and then was gone for about 5 days with that. I did spray the floor with Ghostshield 4500 last week and going to spray with GS 8505 on Sunday. I also ran my downspouts into pvc to get water away from the building. ed42729467c32ab6ab5374d835b916aa.jpg1029f387bf6e3203c33c171a09e5bf50.jpg1cff6c070cf22e1dc586fd679677ed76.jpg


Sent from my iPhone using The Garage Journal mobile app
 

Attachments

  • 1cff6c070cf22e1dc586fd679677ed76.jpg
    1cff6c070cf22e1dc586fd679677ed76.jpg
    569.1 KB · Views: 0
  • 1029f387bf6e3203c33c171a09e5bf50.jpg
    1029f387bf6e3203c33c171a09e5bf50.jpg
    800.3 KB · Views: 0
  • ed42729467c32ab6ab5374d835b916aa.jpg
    ed42729467c32ab6ab5374d835b916aa.jpg
    635.5 KB · Views: 1
To avoid these ads, REGISTER NOW!
Top Bottom