To avoid these ads, REGISTER NOW!

Is this a old land line connection?

stonesg

Well-known member
Joined
Jun 13, 2016
Messages
249
Location
SE Georgia
I was working on the back side of a cross connect box one hot summer day.... Had the inside panel loose and leaned against my chest while I was fishing some wire through from the front... I was a little sweaty and someone on the top row got a phone call.

YIKES!
 
To avoid these ads, REGISTER NOW!

dwasifar

Well-known member
Joined
May 28, 2017
Messages
2,096
A bit of trivia that hasn't been offered yet: Tip and Ring don't have anything to do with the ring of the bell. Rather, they refer to the old school 1/4" plugs operators used to plug into switchboards. Tip connected to the the tip of the plug, and Ring connected to the outer ring of the shaft.
 

fasteddie

Well-known member
Joined
May 25, 2018
Messages
697
Location
NJ
A bit of trivia that hasn't been offered yet: Tip and Ring don't have anything to do with the ring of the bell. Rather, they refer to the old school 1/4" plugs operators used to plug into switchboards. Tip connected to the the tip of the plug, and Ring connected to the outer ring of the shaft.
The same 1/4" plugs we use on microphone and guitar cords today.
 
To avoid these ads, REGISTER NOW!
OP
T

thomasmessi

Well-known member
Joined
Apr 3, 2019
Messages
50
Location
US
Hi guys I see you have a lot of discussion here but I met some problem again I seems cut one set of 4 wires on the brick and I checked my adt it's losing Ac power, my question is can wires on brick providing low voltage power for like alarm system? I also cut some other wire which I thought was benign so now I am confused which one can be the reason my day losing ac power... Need help.

Sent from my ONEPLUS A5010 using The Garage Journal mobile app
 

Miss the Pontiacs

Well-known member
Joined
Nov 7, 2016
Messages
16,482
Location
Saskatchewan Canada
A bit of trivia that hasn't been offered yet: Tip and Ring don't have anything to do with the ring of the bell. Rather, they refer to the old school 1/4" plugs operators used to plug into switchboards. Tip connected to the the tip of the plug, and Ring connected to the outer ring of the shaft.

Had to dig the old cordboard from under a few layers of the kids stuff that hasn’t been relocated to their own homes.:lol_hitti Try not to notice the accumulation of dust, I don’t really try to collect that stuff but It does tend to gather.

Wish I had the old dial for it but that touch pad is probably late 60s or very early 70s.
 

Attachments

  • 1C96B91D-9E13-4D17-A149-F81ED85A6260.jpg
    1C96B91D-9E13-4D17-A149-F81ED85A6260.jpg
    97.2 KB · Views: 35
  • E45CF521-ABD4-4A4B-86DD-48162CDD504B.jpg
    E45CF521-ABD4-4A4B-86DD-48162CDD504B.jpg
    108 KB · Views: 26
  • B4B35F02-68A8-4DE6-95D9-D3B684494F51.jpg
    B4B35F02-68A8-4DE6-95D9-D3B684494F51.jpg
    141.7 KB · Views: 28
Last edited:
To avoid these ads, REGISTER NOW!
Top Bottom