Need measurements off a harbor freight engine hoist

[MrPink]

Hey guys, I need to ask the collective minds here for a favor. I don't have the engine hoist here at the house to take the measurements, but I need the mounting dimensions for the front leg caster wheel. My hoist is currently about 100 mi away and requires a replacement wheel(caster) and I can not find the measurements for the 3.5" front caster's mounting, so I can order a replacement from Amazon or the likes. I know the mounting pad is 3.75"x 2.375" but don't know the hole spacing.

 

[Flared Base]

Quick look hovering the calipers to the same sides of the bolts is about 1.10x2.95. Kind of odd numbers so I would take that with a grain of salt. Maybe that's close to a standard size.

 

[MrPink]

Awesome, thank you sir.

 

[mikegt4]

Quick look hovering the calipers to the same sides of the bolts is about 1.10x2.95. Kind of odd numbers so I would take that with a grain of salt. Maybe that's close to a standard size.

They are not "odd" numbers, they are 28mm x 75mm numbers. Just about everyone except the US uses the metric system including China.
BTW, 2.375" x 3.75" is about 60mm x 95mm.

 

[MrPink]

They are not "odd" numbers, they are 28mm x 75mm numbers. Just about everyone except the US uses the metric system including China.
BTW, 2.375" x 3.75" is about 60mm x 95mm.

yep and this is the replacement wheel

www.amazon.com/gp/product/B078WJGX6B/ref=ox_sc_act_title_2?smid=A30XU5Y510T9EB&psc=1

 

[Flared Base]

They are not "odd" numbers, they are 28mm x 75mm numbers. Just about everyone except the US uses the metric system including China.
BTW, 2.375" x 3.75" is about 60mm x 95mm.

I was thinking it might be metric but the base plate outer dimensions checked pretty much exactly 2.375x3.75 so I thought it would be standard. My quick conversion also came up with 28mm for the 1.1" dimension which doesn't seem to come up in the metric engineering I see but admittedly I don't do much with casters.