Above 1200 Sq/FT Out on Quaker Road
- Thread starter jblnut
- Start date
Wokspaces above 1200 squarefeet.
Not that I know of. Mine can take a 48" chunk if you can get it in there. I looked into a log burner that got loaded from the top but wouldn't have had near the draw it'd have taken to keep the thing happy. Plus it was damn near 3x the price.....was almost 3x the machine though as well. I think it was rated at over 1M BTUs if I remember correctly.
Last edited:
ok hear me out:
heated yard. the whole yard. every bit of gravel. the mailbox.
you'll need one of these to feed it:
Pops and I engineered an animal/stick deterrent device to keep the new drain pipe clean and flowing. It went way over budget and ended up super complex with a ton of designs before we settled on this one. OR .... we found some old crib paneling and chopped it into a nice rectangular shape and called it good 
Time to see how cutting wood in a shed works out.
Spoiler alert .... IT'S AMAZING !!! It's a balmy 13F in here BUT there is no wind so it feels like I'm basting on a beach somewhere warm.
I left the door open and all the windows have been open for a few years so there was no chance of the chainsaw fumes lingering around long enough to make me sickly.
It's been a while since I've done something time consuming that really didn't need to be done. Today I spend a few hours hanging up my Diamond Calk Horse Shoe tool collection. I have a bunch of screwdrivers and pliers to hang yet but am not as sure how I'm going to do that yet. I figured it was high time these things came out of the Rubbermaid tote they've been in for the last 5yrs and I got to enjoy them again. They're all removeable by just picking them off the wall so technically they're not collectibles but are still tools
Apparently being in a air tight container made them quite rusty. Boo. Anyone know an easier way to remove rust than with a wire brush and a lot of time ? Also ... those at the end of my finger are a complete set of the first set of adjustables made in Duluth by the Diamond Calk Horse Shoe Co. I scrounged for quite time to piece them all together. If memory serves me correctly they were produced starting in 1918. The four top double end wrenches to the right are the same vintage. The 10"-12" wrench was a spendy one to acquire. I don't remember what I paid for it but I remember thinking I way overpaid when it came into my world. It was the last one to complete the set though so
Some real good electrical engineering going on here. Power strip with a pair of 24v passive POE injectors .....
Powering this pair of 12v computer fans blowing air upstairs .......
And this pair pulling air back down. With all the wood boiler plumbing in the little mech room in the shop it gets up to 80F or so in there. Pooping when it's 80F is no fun and the room upstairs is only in the 62F area so I figured I could solve two problems at once. It's worth a shot. I'll report back later if it works. Maybe.
I was looking through old pictures today and ran across some baby pictures of Miss Lily. This little bundle of joy is going to be 10yrs old in a few weeks. Goodness where has the time gone !!!
Almost 2 and she has a tighter grip on my heart than I ever thought possible ....
No way that's the same kid .... Good grief !! She's a great human and if she finds this post one day (who knows right) I hope she knows she makes us proud !!!
Time to see how cutting wood in a shed works out.
Spoiler alert .... IT'S AMAZING !!! It's a balmy 13F in here BUT there is no wind so it feels like I'm basting on a beach somewhere warm.
I left the door open and all the windows have been open for a few years so there was no chance of the chainsaw fumes lingering around long enough to make me sickly.
It's been a while since I've done something time consuming that really didn't need to be done. Today I spend a few hours hanging up my Diamond Calk Horse Shoe tool collection. I have a bunch of screwdrivers and pliers to hang yet but am not as sure how I'm going to do that yet. I figured it was high time these things came out of the Rubbermaid tote they've been in for the last 5yrs and I got to enjoy them again. They're all removeable by just picking them off the wall so technically they're not collectibles but are still tools
Apparently being in a air tight container made them quite rusty. Boo. Anyone know an easier way to remove rust than with a wire brush and a lot of time ? Also ... those at the end of my finger are a complete set of the first set of adjustables made in Duluth by the Diamond Calk Horse Shoe Co. I scrounged for quite time to piece them all together. If memory serves me correctly they were produced starting in 1918. The four top double end wrenches to the right are the same vintage. The 10"-12" wrench was a spendy one to acquire. I don't remember what I paid for it but I remember thinking I way overpaid when it came into my world. It was the last one to complete the set though so
Some real good electrical engineering going on here. Power strip with a pair of 24v passive POE injectors .....
Powering this pair of 12v computer fans blowing air upstairs .......
And this pair pulling air back down. With all the wood boiler plumbing in the little mech room in the shop it gets up to 80F or so in there. Pooping when it's 80F is no fun and the room upstairs is only in the 62F area so I figured I could solve two problems at once. It's worth a shot. I'll report back later if it works. Maybe.
I was looking through old pictures today and ran across some baby pictures of Miss Lily. This little bundle of joy is going to be 10yrs old in a few weeks. Goodness where has the time gone !!!
Almost 2 and she has a tighter grip on my heart than I ever thought possible ....
No way that's the same kid .... Good grief !! She's a great human and if she finds this post one day (who knows right) I hope she knows she makes us proud !!!
Jim_No_Garage
Well-known member
The upstairs might need a warning system if your pooping below and venting upstairs ...
Hmmmmm. Solving two temperature issues but creating a fumigation ventilation issue ......
Might have to put a relay and timer in so the upstairs fans shut off when I turn the lights on and turn back on after a half hour or something. Or I can just spray some fabreeze into the fans so it smells good everywhere.
The fabreeze thing is more of a solution you'd find on a Cricket forum .... The GJ solution is the relay and timer. Should likely put a light outside the bathroom door that goes on when the lights are on and off after a half hour as well.
You are missing out if you don’t have a set of these in your collection, incredibly useful!
Diamond Tool & Horseshoe Co. Adjustable 9" Smooth Jaw Monkey Wrench C-79 G102 | eBay
Here is a good, barely used Diamond Tool & Horseshoe Co., C-79, 9" adjustable smooth jaw monkey wrench. This one has the diamond & horseshoe logo. The jaw width is 11/32" and the jaw depth capacity is 1-1/16".
www.ebay.com
I struggled HARD not to fall down the monkey wrench rabbit hole and succeeded so far. I have a few old ridgid models that I use but no Diamond branded ones. Based on how many different wrenches I have only one of I think I'd fill 10 walls that size. All the oddball ones on the right are the only one of each type I have. There are a few really neat ones and I keep watching ebay for more but the funds for frivolous things have been getting shoveled to larger things these days. Like that Freightliner pickup !!You are missing out if you don’t have a set of these in your collection, incredibly useful!
Diamond Tool & Horseshoe Co. Adjustable 9" Smooth Jaw Monkey Wrench C-79 G102 | eBay
Here is a good, barely used Diamond Tool & Horseshoe Co., C-79, 9" adjustable smooth jaw monkey wrench. This one has the diamond & horseshoe logo. The jaw width is 11/32" and the jaw depth capacity is 1-1/16".www.ebay.com
Jim_No_Garage
Well-known member
The TRUE GJ solution would be to follow in @Denwood 's footsteps and use an HRV with automation, monitoring and such.
Poop jokes are always funny - I'm 57 with the sense of humor of an 8 year old boy.
Jim
drivesitfar
Well-known member
If you get a small bin and put in some vinegar you can set your tools in there for a bit and rust will come off easier. Just don’t leave in vinegar too long especially the chrome plated tools. Sometimes a few hours works or a day or two but much longer than that and vinegar can eat the good parts of your tools and not just the rust.
If you aren’t in a hurry 1 part molasses and 9 parts water is a mix that you can set rusty tools in for days or weeks to remove rust. For bigger tools like a vise or … electrolysis works great and there is a great thread “homemade electrolysis” here on GJ where we asked and answered a ton of questions about how to do that.
I bet you were smiling when your little girl was driving and I’m sure that smile will only get bigger when all 3 of them are doing stuff around your farm.
Stay warm and try not to consider fabreeze as a solution for odd smells.
If you aren’t in a hurry 1 part molasses and 9 parts water is a mix that you can set rusty tools in for days or weeks to remove rust. For bigger tools like a vise or … electrolysis works great and there is a great thread “homemade electrolysis” here on GJ where we asked and answered a ton of questions about how to do that.
I bet you were smiling when your little girl was driving and I’m sure that smile will only get bigger when all 3 of them are doing stuff around your farm.
Stay warm and try not to consider fabreeze as a solution for odd smells.
drivesitfar
Well-known member
Also having a nice old Baldor or craftsman bench grinder with a nice wire wheel on it is a bit easier than removing crud with a wire brush after the vinegar or molasses baths but bee careful not to take too much of your good metal off after you remove the rust.
bugnut
ALLIANCE MEMBER
I like the ultrasonic and a quick warm evaporust bath for the rusty tool!
RickP
Well-known member
That old shop looks really good -- like it's still got some useful life left in it. Maybe for a "project" car that'll spend a lot of time sitting on blocks?
Very nice collection of old wrenches! I like the display board.
Jayman17
Well-known member
Mike, I had to laugh at your description of a 13* temp as balmy and like basting on the beach!
Glad to see things and life are good on your farm.
Jay
Glad to see things and life are good on your farm.
Jay
ambenz
Well-known member
These are the days to savor, my friend. You have your health, kids are at a great age, a new house, property is user friendly, and Pop's is still around. Thanks for sharing your thread with all of us, very cool!
It was mentioned above, but I’ve had good luck with Evaporust. Careful not to leave in too long as it’ll turn them black.
OutlawDrifter
Well-known member
30% vinegar is supposed to knock the rust off when diluted some with water.
Denwood
Well-known member
Stumbled across this thread and I must say it's an awesome insight into the reality of modern farming. Awesome shops and projects delivered with a great sense of humour. Mad props to your work ethic sir 
Sifan
Well-known member
Looking at last years and coming years fertilizer pricing, GREAT timing on your chicken operation and poop shed.
In Illinois, a lot of corn acres being swapped to beans for another year, little if any profit margin in planting corn.
In Illinois, a lot of corn acres being swapped to beans for another year, little if any profit margin in planting corn.
jollygreengiant
Well-known member
It's funny how different things are from one area to the next. Here corn is better than soys by $50/ac right now.
I read through that thread and wowser there is stuff going on in there !!!
Poop jokes are, and will always be, funny. Doesn't matter the age !!!
I will be trying the vinegar thing tomorrow on a few things to see what it does. Thanks for the tip !!
I have a wire wheel grinder somewhere but can't find it back after moving into the new shop. I have no idea where it could have gone
I picked up some evaporust the other day to give a shot to. We shall see !!! Thank you for the tip !!
I have thought the same thing for a while and keep getting tempted to put something in it but always remind myself why I build the new one. It's a bear to heat and gets something awful musty in the summer. I think it's going to serve as a wonderful wood shed though !! Likely will keep the golf cart, mowers and wheelers in it in the summer though.
The "project" car is a 1984 Mercury Grand Marquis that needs a freshening up. A built 460 and a 1-ton rear end should be a good start
If you've ever cut wood in the middle of a pasture in the blowing wind when it's 13F you'd have been as excited as I was to cut inside the shed !!! It was a real treat !!
Things are great out here. Kiddos are healthy and Mama Bear keeps coming home after work everyday so I guess she still wants to live here as well
No kidding. Say it again, no kidding. I try to hug the littles everyday and tell them they're doing a good job when they are and try to give as constructive feedback as possible when they're not. I'm trying to keep the "What the **** did you do it that way for ?!?!?!" to a bare minimum .... I got a lot of that type of feedback in my younger days and turned out okay so maybe I need to do that as well .... hmmm ....
Thank you for following along !! If there is something you'd like to see don't be afraid to ask !! I'm an open book about the farm stuff.
Will do thank you !!
How much vinegar do you think it'd take to soak an entire Ford Ranger ??
I've read a bunch of your content over the years and have to say I need to read some of it twice, scratch my head and move on. Lots of technical stuff lol. Thank you for the positive words and for stopping by !!!!!Stumbled across this thread and I must say it's an awesome insight into the reality of modern farming. Awesome shops and projects delivered with a great sense of humor. Mad props to your work ethic sir
Agreed on the manure supply. We're actually going to switch some acres from beans to corn this year .... $6.50/bu at 180bu/a beats $14.50/bu at 55bu/a in my book. $372.50/a to buy fert/chem to pay for the difference ... yup. Makes sense up here. Beans are a lot less stressful than corn though !!!
Pretty rare that beans are more profitable than corn in this area. Plus .... I need corn to feed the critters so I like to air on the side of for sure having enough corn to get by on a poor year ....
Gobble gobble mothercluckers !!!!
Chomping through this ****** boxelder like a fat kid gobbling down pumpkin pie on Thanksgiving !!! One of these totes has been lasting 3days in the 30F'ish temps.
I've been searching for a way to monitor the water temp in the stove for a while now and finally stumbled on this Inkbird temp dealio made for cooking meat and stuff on a grill/smoker. I'm trying a new-fangled ZipLoc branded enclosure for the time being ... don't judge me
Red/Green are sensors on the hot supply's. Teal is return from the shop and yellow is return from the house. You can see when the shop calls for heat.
Also and more important is the ability to set a temp threshold so if it gets too hot or too cold it'll yell at me.
The ol' International 886 had to be parked as it's tires were way too bald to do anything in the snow and ice. Plus the heater works in the 7400 so that's nice
It was something silly warm like 39F or something and the kiddos wanted to do outside things. Yes absolutely !!! I drug them around in the sled for the better part of 10 miles when all was said and done
They wanted to build snowmen so we all found a nice spot in the field and got after it.
Fun stuff
Pops and I ventured 200 miles away to bring a new to us Hardi sprayer home !! This thing is a BEAST !!!!!
I've been searching for a way to monitor the water temp in the stove for a while now and finally stumbled on this Inkbird temp dealio made for cooking meat and stuff on a grill/smoker. I'm trying a new-fangled ZipLoc branded enclosure for the time being ... don't judge me
Red/Green are sensors on the hot supply's. Teal is return from the shop and yellow is return from the house. You can see when the shop calls for heat.
Also and more important is the ability to set a temp threshold so if it gets too hot or too cold it'll yell at me.
The ol' International 886 had to be parked as it's tires were way too bald to do anything in the snow and ice. Plus the heater works in the 7400 so that's nice
It was something silly warm like 39F or something and the kiddos wanted to do outside things. Yes absolutely !!! I drug them around in the sled for the better part of 10 miles when all was said and done
They wanted to build snowmen so we all found a nice spot in the field and got after it.
Fun stuff
Pops and I ventured 200 miles away to bring a new to us Hardi sprayer home !! This thing is a BEAST !!!!!
Denwood
Well-known member
Hey, is that temperature monitoring and graphing I see there? Apparently after you scratched your head and read twice...
There is so much going on with your equipment and managing it all, I would not assume for one second that you did not have mad skills on the technical side of things. I followed along a bit on the "Right to Repair" thing with John Deere and was not surprised at all that it was an issue. Of all the occupations I have mad respect for, it is guys in your line of work. Hard working, problem solving and apparently keeping your wives/partners, uh, very happy. It was a stat I read some time ago...ha.
There is so much going on with your equipment and managing it all, I would not assume for one second that you did not have mad skills on the technical side of things. I followed along a bit on the "Right to Repair" thing with John Deere and was not surprised at all that it was an issue. Of all the occupations I have mad respect for, it is guys in your line of work. Hard working, problem solving and apparently keeping your wives/partners, uh, very happy. It was a stat I read some time ago...ha.
Denwood
Well-known member
Out of edits for the day..sorry for the 2nd post.
On the Inkbird, are you just taping the sensors on the pipes, or using thermowells inline? How long is the path to the shop and house? Based on those return temps, I would guess that the plumbing is quite well insulated. I had to laugh at the "Rare" indication on the screen Given the low cost for that setup, I'd say a pretty smart setup with the app/graphing etc. If you want any tips on automation, I may be your man.
On the Inkbird, are you just taping the sensors on the pipes, or using thermowells inline? How long is the path to the shop and house? Based on those return temps, I would guess that the plumbing is quite well insulated. I had to laugh at the "Rare" indication on the screen
Given the low cost for that setup, I'd say a pretty smart setup with the app/graphing etc. If you want any tips on automation, I may be your man.OutlawDrifter
Well-known member
As a former Bestway Sprayer Territory Manager...ewwww on that Hardi
What tank and boom size? You didn't happen to buy it at Schwartzrock in Charles City, IA did ya?
What tank and boom size? You didn't happen to buy it at Schwartzrock in Charles City, IA did ya?
Sifan
Well-known member
"I try to hug the littles everyday and tell them they're doing a good job when they are and try to give as constructive feedback as possible when they're not. I'm trying to keep the "What the **** did you do it that way for ?!?!?!" to a bare minimum .... I got a lot of that type of feedback in my younger days and turned out okay so maybe I need to do that as well .... hmmm ...."
As a veteran of working with family farms off and on for 50 years, please allow a few observations and suggestions ... always remember that you and your Dad have worked together for many years, and what is obvious/natural for you is the first, second or third time for your kids. When giving instructions/directions, have them repeat your instructions/directions to you. That way you know you explained it right and they got it. Plus, as you have them repeat stuff to you, they are going to pick up on it and pay more attention because they know they are going to have to repeat it. And always, if you're not sure, ASK if you can't do it safe, STOP ask for help!
As a veteran of working with family farms off and on for 50 years, please allow a few observations and suggestions ... always remember that you and your Dad have worked together for many years, and what is obvious/natural for you is the first, second or third time for your kids. When giving instructions/directions, have them repeat your instructions/directions to you. That way you know you explained it right and they got it. Plus, as you have them repeat stuff to you, they are going to pick up on it and pay more attention because they know they are going to have to repeat it. And always, if you're not sure, ASK if you can't do it safe, STOP ask for help!
Yes it is !!! We were at a birthday party for one of the nephews and my BIL had this neat app on his phone watching the temp of the meat on the smoker. I poked a bit at the app and decided that it was exactly what I was looking for !! I think it was $99 and worked right out of the box. I tried to customize the labels but can't get rid of the "Rare" on the screenHey, is that temperature monitoring and graphing I see there? Apparently after you scratched your head and read twice...
There is so much going on with your equipment and managing it all, I would not assume for one second that you did not have mad skills on the technical side of things. I followed along a bit on the "Right to Repair" thing with John Deere and was not surprised at all that it was an issue. Of all the occupations I have mad respect for, it is guys in your line of work. Hard working, problem solving and apparently keeping your wives/partners, uh, very happy. It was a stat I read some time ago...ha.
On the Inkbird, are you just taping the sensors on the pipes, or using thermowells inline? How long is the path to the shop and house? Based on those return temps, I would guess that the plumbing is quite well insulated. I had to laugh at the "Rare" indication on the screen
The temp sensors are zip tied to the pipes coming out of the stove, wrapped with metal foil tape and wrapped with pipe insulation. The app shows 179 when the stove shows 180 so it's pretty close to what is actually going on. Thank you for the automation tips offer !! I may take you up on that sometime .....
My wife and I grew up on dairy farms so this lifestyle is second nature to us. I have a few good buddies from college and one from a car club, who is actually a member on here, that are city boys through and through. I have a great time showing them what we do out here and it always amazes me how amazed they are at what we all have to do on the farm to keep things moving. I enjoy it and the work/family balance has gotten both better and worse since I "retired" this spring from the off the farm job. Since there is always something to do my brain has gone into overdrive of sorts trying to get it all done. I need to make some lists and prioritize to keep myself sane I think .......
Never heard of a Bestway Sprayer before. Looked them up and there are definitely a few things that caught my eye !!As a former Bestway Sprayer Territory Manager...ewwww on that Hardi
What tank and boom size? You didn't happen to buy it at Schwartzrock in Charles City, IA did ya?
It's a 60'/90' boom with a 1,000 gallon tank. Hardi 5500 controller. I'm stoked to use it this year !! Should be a tad faster than the 45' sprayer we've been using forever. We purchased it at Dave's Repair in Hillls, MN.
That is the strategy I've been trying to go with !! Be patient, lots of feedback and always make sure they are comfortable with whatever it is
Loads of wood !!!
Miss Lily found a few trees she wants to cut down and bring home .... This is a monster
Goodness she's ambitious
More wood !!!
Three big poplar logs to cut up. Big, ugly poplar. This stuff almost rots as fast as it grows
What a mess !!! I cut them smaller than I normally would but I still can't lift them up into the splitter
Got the whole crew lined up ready to work !!
And a random picture of some Diamond Chain Wrenches just for funsies
Miss Lily found a few trees she wants to cut down and bring home .... This is a monster
Goodness she's ambitious
More wood !!!
Three big poplar logs to cut up. Big, ugly poplar. This stuff almost rots as fast as it grows
What a mess !!! I cut them smaller than I normally would but I still can't lift them up into the splitter
Got the whole crew lined up ready to work !!
And a random picture of some Diamond Chain Wrenches just for funsies
OutlawDrifter
Well-known member
The 60/90' boom is a pretty cool option, especially on the smaller pieces of ground. Makes it a more versatile piece of equipment for sure.
I'm not as familiar with the sprayer dealers north of the IA border, as that is where my territory stopped. At one point I worked for Brandt Holdings Company in Export Sales and Used Equipment Remarketing for their John Deere dealerships...they own a bunch of John Deere dealerships in the Dakotas, NE, and MN. The Kibble group, Crookston, Wheaton, etc. So I did travel near your area back then.
XJSuperman
Well-known member
Why are you bothering to split those chunks of log? I wasn't paying enough attention earlier in your install, but my old neighbor used to feed unsplit chunks into his furnace with his skidsteer. Just get a couple chunks in the bucket and then push them off into the cooker. No lifting, no splitting needed. Maybe your door is smaller than his furnace though.
We're going to keep the 45' sprayer as well so we can go with two and ya know, really get stuff done !! And I intend to set the old one up with some Y-drops to use it for in season N applications.
Stop on in if you get back up this way sometime !!!
If it fits in the 24x24 door it'll burn it but these damn things are too big. The 18" bar on the MS251 barely cut through the biggest ones. I tried to cut them in half and they're so soggy and wet it didn't work worth a ****.
I ordered a full chisel skip tooth chain for my MS250 so we'll see what that does. The micro-chisel chains on these saws now are nice but I'm excited to try something else. Literally from one end of the spectrum almost all the way to the other
They look like Cottonwood, won'be dry till...............2025!
dumb. Yes they are cottonwood. Not sure why my fat fingers typed poplar .... Twice 
patlun
Well-known member
It seems like you needed more power to pull that wagon... 
jollygreengiant
Well-known member
Gonna leave this right here
More to post soon on that beaut
That should be a nice upgrade for pulling the tile plow!
It seems like you needed more power to pull that wagon...
gonna need a larger dump trailer now I guess Yeah no kidding. Weighted down around 45,000lbs with new tires and another 175hp over what the STX325 has .....
The local dealer called a buddy and asked if he was interested in purchasing it and he said no but I known someone that is looking for that exact tractor. We met the semi in the yard when they brought it in and climbed all over it before they had a chance to gussy it up. Worked a deal out on it yesterday afternoon and it'll be in the shed in a few weeks.
1 owner, 4,289hrs, 24spd, 710 duals with a few hundred hours on them, 10,000lbs of weights on it, brown box with steering column, big hyd pump, and the deluxe cab/instrumentation package. Only thing we're nervous about is that it's chipped to be around 500hp but from the digging I've done and what the service manager said since it's a 24spd trans and not a power shift it'll likely be fine. Worst thing to take out would be a clutch as the motor is plenty well built to handle it.