Recent content by 03roadking

This tool is on clearance at Lowes right now for $45. I have found it to do a really good job and cleaning steel down to shiny metal. I made my own cable railing for my deck out of 2x2 tube and had a lot to clean up before taking to the powder coater. This thing worked awsome! I wanted a...

Hey guys go easy on me. I taught myself how to weld during covid and this was one of my early projects I made. My dad needed a support foot for a gate that he wanted to keep from sagging. This is what I came up with. Let me know what you think!

@Bsheffer I am a woodworker also and after I used the clarke floor maintainer with the daimabrush attachment on my garage floor I was surprised at just how smooth it was also. After the daimabrush and a powerwashing I would call it closer to 320 grit or higher as a comparison to sandpaper. all...

I didnt get any pics of the second coat so here are some pics of the third coat with flakes And here are a couple of close up pics with one coat of clear with the non slip additive in it. This was about 15hrs of dry time. Let me know what you guys think so far.

Here are some pics of the 1st coat going down 1st coat done Here is how much I used on the first coat of half my garage. I have no idea how much is left here.

Hey all I wanted to share my experience with rust bullet so far. I have half of my 3 car garage done so far. I looked into having it professionally installed but I couldn't get around the fact that I had to leave my stuff out of the garage for any amount of time. I have woodworking tools...

That looks awsome! Almost kicking myself for just going with grey and flakes! The white looks really good

I used 1/2" pvc. I am liking how it turned out so far. this thread shows some pics of it http://www.garagejournal.com/forum/showthread.php?t=239131

Thanks for the info pattenp! I am pretty sure I am withing the 3 feet guidline.

Thanks Mustang ha I had read about how pvc conduit starts to sag after a while. Plus I bought a box of the straps so I had an abundant amount of them.

C96 I had already purchased all of the pvc conduit and was committed to it. Here is what I ended up with. My cheap wire roll holder. I added the conduit straps after I took this photo.

Thanks for the reply Mustang, I will keep this in mind.

Thanks Charles I have purchased the roll of #12 green for this.

Hey all I would like to see some pics of how others are connecting their pvc conduit runs to their panels. I have a surface mounted subpanel in my finished attached garage and am not sure of the best way to attach conduit runs to it. I am thinking one of these and a nut on the bottom but am...

I would go with either of these from home depot. I have the 8' long with 4 4' bulbs. It is bright! http://www.homedepot.com/p/Lithonia-Lighting-4-Light-Fluorescent-White-Strip-Light-Fixture-TZR-2-54T5HO-MVOLT-1-4-GEB10PS/202516724#...