Recent content by 12gauge

if you do decide to buy one, get a forged one. I have broken a 20$ cast one.

Are you selling "wolverine" product however still?

do brush seals just come in a roll, so that you can fit them to any size door? they only seem to sell them as kits to fit 2 door sizes on summit. I have 10x12's on my shop that i want to seal up better to keep the heat in & humidity out.

this is is exactly what i needed & used. i ended up finding this on my own. but hopefully this will help someone else when buying the mr heater.

I got the same deal. I'd go with the 75K if its not much more.

i'm not using the 90, so maybe that is the diffference. it looks like the only way i could make the b-vent fit the 4=2 adapter would be to cut out back the outer pipe or cut the heater itself. the vent is net centered worth a darn in mine.

I ordered the 75K mr heater big maxx & horizontal vent kit. the exit pipe is 2" diameter & there is 2" to 4" adapter that came with the heater. But nothing seems to really fit right from the vent kit? which piece is supposed to fit to what? nothing really seems right. the adapter that...

Well this started quite the firestorm, 12gauge just happens to be my my fantasy football team. easier to remember 1 login name. My questions were posed via email, because i was originally dealing with budget bob. He did respond to emails, I just did not get most of my questions answered...

i'd like to put on the record that Bill does not take a lot time to answer questions. I have not ordered product because the questions i have asked were not addressed.

Ksbee, I only wish i would have done that. i would have had the roof sprayed too & not used that roll-in thin insulation junk that pole building companies use. with 2 dehumidifiers running i am able to keep a 7 to 10% RH difference now between outside & the shop. drywall should be good &...

Erik, bob sent an email to you & your president on my behalf & he (pres)responded on christmas day with the following. "First, there are never guarantees in this situation. No other company would even think about touching this. BondTite is not sensitive to moisture when it is applied and the...

i just built a 12ft span 2nd floor in my shop using 2x10"s. I also added support beams attaching to the wall to help hold the load of the building. I'm sure your building wasnt designed to hold the additional load of a 2nd floor. i was told that 2x8" would have been sufficient by most places...

you will have the same problem as me with the R-21 Kraft in the wall. after much drinking & thought, i am thinking of taking the siding off & putting a 3/4" strip(plastic or treated wood) followed by plastic liner & then the siding again. at least this way the wood & insulation wood breathe...

make sure you plan ahead so you dont end up with a sweat box like me. Im just north of you & i built in stages & now that i've added insulation & drywall the inside of the siding is completely soaked with water & so is the insulation now with condensation. dont ask me the right way, i can...

i bought a 75pint dehumidifier last night at lowes. its a whirpool, dont know how well it works, but it pulled a good amount of water out last night. However, humidity was still about 77 in the building & 85 outside this morning. there is 5 inches of snow on the ground (i'm actually in...