555's latest activity
-
5555 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with
Like.
Clutch is done in my cobra. Starting to slip when cold, lugging. I believe I installed the Mcleod dual disk clutch around 2013, made... -
5555 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
With the machine barely working, I immediately want to change things. The Z-axis I'm using on the router has more play in it than I...
-
5555 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
Well, I have this VFD you can have for free.... Is the existing motor below 2 hp? Not many VFDs above that in 110V input configuration...
-
5I've been thinking to employ the Hitachi VFD that I acquired from where I have no idea on my 30's era, ~900 lbs drill press that...
-
5555 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
Got the VFD and spindle figured out. Trying to turn it too slow, improperly programmed VFD. User error, RTFM.:rolleyes: Misunderstood...
-
5555 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
After getting the drill press finished out, Spent some time on the CNC router. Step one was to RTFM, the whole thing, again. Step two...
-
5555 reacted to rattle_snake's post in the thread rattle_snake's random shop projects v0.1 with Like.
Finished out the drill press VFD swap to 110V. Don't have to put these VFDs that require a box in a box. but they should be. Otherwise...