Recent content by 8nford

I have in floor in the house 30x50 and its sweet . Brother in law keeps his garage at 50 then cranks it up when he is out there . Dragging my feet , but it ***** running a propane bullet way to much moisture coming off it .

Stingry what brand of water heater ? Power vent ?

As i mentioned tubing has been in since 2012 . 32x50x10 Insulated ceiling and walls . Slab has 2 inch pink HD under and on sides . Now at a stand still . Pricing some boilers and almost passed out ! Brother in law hung a propane ceiling heater in his garage and loves it . He is willing to help...

Only 6 and 1/14 R=19 im going to try and tack a plastic paint guide across and see if it,s better. If not i will break them down to 4 ft . Thanks guys

Sure do but batt wont stay up well enough to staple . Need both hands to hold batt up in position then the back half of batt flops down on top of me . Need to figure how to keep back half up so i can pull and staple the batt .

Finally started ceiling insulating . I have 23.5 inch wide by 39 ft long kraft faced batts . I cut them 8 and 8'11" to reach the peak 20 ft up. My issue is trying to keep batt in place . Starting on the eave side worked pretty well shoving batt in ad staying in place. Until the next batt...

Thanks guys for the feed back , some good ideas. I have the foam baffles stapled to the roof deck , a couple inches past the top plate into the soffit. Think i will get some 3/4 in high density and cut and foam in place . Probably take longer to do , but i know it will be sealed. Northern...

Putting up proper vent,s on inside of roof . The gap between the top plate and the proper vent is considerable . I see wind baffles are available for purchase . But don,t think they will cover the opening well enough to prevent wind washing. Can i take craft faced batt insulation ,roll it craft...

Well i figured it out, pretty simple really everything pulled apart with finger pressure.

I got the thing apart and don,t know how to proceed to remove the the grinding wheel from the plastic hub.Any body replace a wheel on their 250 ? Thanks Don

Using a blend of ATF and kero,the pump still works!

I live in northern Wi i have a 32x50 with no gutters,but i have a metal roof. Snow slides and ice.Not your problem, you have shingles. The leaves, with all those trees close by will be a problem ,without a cover screen over the gutter. For me gutters are in the future and snow brakes,don,t like...

Nice attention to detail.

Infloor heat [still not hooked up]

It has really good ball bearing drawer slides,came with a lot misc. tools mostly newer,some older. Paid 100.00