Recent content by aleccolin

Yeah, I saw that. I guess what I should have asked is after the replacement units are sent out will they be going back on sale, and when do you anticipate that to occur?

Okay so what's up with the pressure return valves? They don't appear on your website anymore. Were these taken out of production?

Yes, which is why I'm sistering another 2x4 (glued and screwed) across that area at each location. I'm not worried about the warranty which is probably out by now since it's 7 years old, I just want to strengthen it a bit so they don't crack when the blown insulation is going in. I'm taking...

Do I need a box at each fixture location? The lights I have were installed as shown, but I'm hanging sheetrock and need to know if I need a bunch of boxes or if I can poke the wires down through the sheetrock into the fixture when I put them back up. I have something like 22 fixtures total...

Yeah it's two per purchase, not sure why they do that but they'll let you do two transactions in the same visit usually. Food for thought, Eastwood's hydraulic dollies are the same price as the HF coupon price and accommodate up to 12" wide tires, the Daytona dollies are 11". They're...

$100 each through this Sunday 9/29 with coupon, limit 2 per purchase. https://vimeo.com/320082559

The light output is good for 90% of things, I’ll still use a stick light to get into nooks and crannies, but yeah plenty of light imo. Sent from my iPhone using Tapatalk

The next thing I want to try is taking apart the HF light to see what battery is actually in it, and then finding a way to make it swappable or just increase the capacity. The best thing about the Braun work lights they sell now is that they use standard button top 18650 batteries, makes it...

Glad I could help, I was surprised they sell the mount separately. Should be nice for detailing interiors as well.

I really like your garage.

Nothin' special, but I finally got it mounted again after selling the bench/toolbox I had it bolted to before. This is better. Also got some soft jaws. Need to clean and paint the mount. Receiver from Trick Tools.

Harbor Freight (Braun) underhood light plus Bayco mount = Great success HF light with coupon $30 https://www.harborfreight.com/845-Lumen-Underhood-Rechargeable-Work-Light-63990.html Bayco mounts on Amazon https://www.amazon.com/gp/product/B00HWQ4GPA/?tag=atomicindus08-20 $27 Total Cost...

Digging up an old thread, but for the guys who own one of these, is there no suspension on this thing, or am I missing something? Looks like the spindles bolt directly to the carriage with no springs or anything. Edit: nvm looks like they use torsion axles. Carry on

As far as I can tell the JawsFit feature would be most helpful with a screw that has some gunk or corrosion in it, preventing the blade of the driver from fully seating. In that case the serrations on the outer edge will provide a little extra bite and keep it from camming out. Same goes for...

Vesselmania!