Recent content by anotherjoe

  1. A

    Ladder Rack Advice

    Im building a rack that will mount to the top of my fiberglass cap, it will have an internal frame for additional support. So the rack and internal frame would have a "sandwich plate" with matching hole patterns so that they will bolt to each other through the fiberglass cap. What I cant decide...
  2. A

    De Crown Welding Table

    wow that was easy, took about 15 minutes of heating with a oxy torch
  3. A

    De Crown Welding Table

    FWIW I will be a building a lower frame for it to sit on out of 2x2 tube. So possibly I could also put the top on the frame upside down(it is crowned down) and use some ratchet straps to aid while heating, but chances are the 2x2 will give before the 2x4.
  4. A

    De Crown Welding Table

    thanks for the tips, I did not check the steel before so its possible that each piece was crowned and I happened to orientate each side in the same direction. When using either the bead or torch technique how long should I wait between each weld or heating before repeating? So that I dont go to...
  5. A

    Milwaukee dry-cut saw discontinued

    anyone know where to get a replacement blade?
  6. A

    De Crown Welding Table

    I made this table top today, and just put a string line to it to find a 1/16(a big 1/6) inch crown. So I was wondering if there is any technique to use heat distortion as a correction, either by welding or with a torch? Also how could I avoid that in the future? Did I use the wrong sequence or...
  7. A

    Machinery Lock Out Switch

    Do you know if that key is a key switch? Or is it the type that has a cam on the back that pushes a button? As far as fob system I have that squared away, I do access control for a living but typically only control doors not machinery but the concept is the same.
  8. A

    Machinery Lock Out Switch

    Im trying to integrate a fob access control system with various machinery(mill, table saw, etc) So Im looking for something similar to what you see in home depot for the panel saw where you have to enter the combo to enable the power. Only instead of a combination it would turn on when a dry...
  9. A

    Service Body build

    looks cool, what kinda truck is it going on? I was going to build one of these at one point but after specing it out, it got real heavy real fast.
  10. A

    show me your DIY socket organizers

    Home made stuff is way cooler than **** from china
See more
Top Bottom