Recent content by BartPeace

I plan to use 1 in sc 80 pvc for the main run into the building. about 20 feet then go to pex. thanks for the input

Okay. I am going to try it when I instal the bigger compressor. Thanks

I have a rear bench seat from a mini van on casters and two recliners on casters. They are nice for watching games and such. Also nice for the neighborhood experts to come over and tell me how they would do it. If they are in the way roll them out the door. (the chairs)

I have rebuilt a few Toyota motors using a manual. It can be done. Let me know if you have any questions. Good luck

If you heat your shop with wood, add a drip line from the oil storage to the firebox. Makes a hot fire, uses oil, saves wood. Control drip with a temp controled solenoid or needle valve.:thumbup:

I put a similar compressor in the attic. Used a short whip of hose to allow for the vibration. I used 1" pvc to the bench and to the other side of the shop. I put a regulator at each outlet. All line are in the attic or the walls. :thumbup: This has worked for two years. But still is loud. I am...

Can Pex tubing be used to supply air? It has a pretty high pressure rating for water.:headscrat