Recent content by BlackdogJunkyard

Ok then run underground wire to a box set in the ground to your single plug. Open the box and plug it in when you need it and shut it when you don't. You will have a 6x6" square set into the ground. Not bothering anyone. Edit: obviously for any of these receptacles I would use water tight...

Why don't you just run a underground service wire to the green house and put a small sub panel on a post just inside the perimeter of your green house. Then you can run whatever you may want out there and you don't have a wire run across the yard to trip over. You could make it a 50amp panel...

I am NOT saying they should I am just saying that they do. All I had to do to get a deal at Home Depot was hand the coupon over. they did not care whether or not Harbor Freight sells wire. Every time they called over an assistant manager who would help them enter the coupon in. I have no idea...

Nope. I have done it t least 4 times. I used to work at that home depot and I know the employees are not new. I can't believe that you are skeptical of this. Obviously Home Depot is not going to accept free flashlight coupons however they do accept percentages off coupons. Also who said Home...

HD in my area takes the 20% coupons every time without fail. Just two weeks ago I bought 45' of 6/3 wire and some other electrical items and they took the coupon without question. Sent from Outer Space.

Hahaha You have just suggested the two ideas I had. My friend was concerned with the pump idea because he figured that ice would build up slowly regardless of running water. Sent from Outer Space!

I need to get water from my heated garage through 4 non heated garage bays into the 5th bay on the very end. The 5th bay will be heated. The bays are all in a line. It gets very very cold in Maine during the winter. How can I do it? I have some ideas but I don't want to contaminate the idea...

I agree with the above but maybe you could use some hardware from lazy Susan style cabinets. Sent from Outer Space!

I went with this plan. Crazy glue is hella cheap. This is my back up plan if the glue fails. Lololol I think this could be done with any of the ideas suggested however I think I will just end up getting an engine hoist. I always forget that with an over head pulling device, one pretty...

There we go. Thats pretty much what I was thinking but couldnt find any info anywhere about what kind or weight it could hold or if it would begin to be remotely safe. I will try and get a ten foot 8x8 piece of hemlock and some 12 inch timberloks. Btw The chain fall only weighs like 30#... I...

I wouldn't either... Thats why I am here asking the question:D Sent from Outer Space!

So I would like to hang a chain fall from my ceiling. I have 16' high ceilings in my 15x30 garage bay. I have a flat roof being supported by 2x6's 16" on center. I will use the hoist to pull motors from my Volkswagen and my friends Volkswagens. Motors average around 300# max. The cars...

Where I work we just keep 6 or so blades on hand and when we are on the last one we ship them out to be sharpened. Along with our router bits. Auger bits... Anything sharp or pointy. Superior Carbide in Lewiston Maine. Many companies use this guy. He is very very good and it is way cheaper than...

Their website. http://www.ngkmetals.com/index.cfm/m/62/fuseaction/store6products.productDetail/productID/409/merchantId/0/departmentId/0/categoryId/1/Adjustable-Pipe-Wrench Sent from Outer Space!

Just recently got this given to me. I was only told that it was made out of bronze and that it doesn't spark when using it. I looked it up... They are only made to order. $300 brand new for this one... :screwy::what: Pretty neat though. Sent from Outer Space!