Recent content by camaro77

everlast

do not do 1/4 inch wall I would do 1/8 it will be plenty strong by time you get proper penetration for 1/4 inch steel you wont have much metal left from the factory frame rails. make sure before you start welding it all the factory frame is all level and square and everything on the camper...

honda has a 17 MM fill plug on the top of the trans

thank you this is a huge help seem to be the same like you said

hello guys I recently bought a enco 109-1005 and I do not have any owners manuals it could use a couple new drive belts does anyone have on of these that could help me to figure out where I can purchase the new belts I can not seem to find any info on this machine at all on the WEB

thanks tweaker this is what I was looking for looks like grainger has them.

wondering if any one has run into this I just fired my new to me compressor and the small air line that runs to the pressure switch blew off it appears to be a push lock fitting I have not taken it apart yet is the fitting replaceable or does it need a complete new on off switch assy?

does anyone know what shade of red will match a husky air compressor best? hoping to paint my bench to match with out to many trips to the home depot

hello guys im in the final stages of finishing up my garage I noticed that where the floor and foundation meet there is a small gap and I can feel the cold air leaking thru what can I use to seal this up. I also want to paint the foundation inside the garage with some type of moister sealer...

where are you guys buying the receiver tubes at for a good price

thanks guys for all the responses I will do it all in 1/2 inch I just like things neat and clean this is my second garage but first house/garage that I own. I build race cars sometimes I have a friend or second person working with me no blast cabinet just trying to keep all kinds of lines...

getting ready to plumb the garage for air have a 60 gallon tank and plan to add a extra 20 gallons because I have it garage is 24x24 going to have a 24 ft run the 90 to another 24 ft run with 4 drops. I plan to do the drops in 1/2 my question is do I run 3/4 for the main feed or keep it all 1/2...

I just did this in my garage we ran 6-3 wire to the first box and then the electrician used so e type of wire nut to join them together he used what he called a whip wire to connect to the first plug the recepticale is not big enough to have 2 # 6 wires slide into it. we did have to use 3 boxes...

google battery charging lugs we use them on the race cars...

Ok, maybe I was a little blunt and see that your defensive about it. I am sorry for that. FIREBRICK no worries at all I just spent way to much time installing this strapping alone to even want to think about pulling it down. I will know for the next time that I jumped to far ahead story of...