Recent content by cdestuck

Have a 20x24 addition I put on my brick house about 45 years ago. T1-11 siding which is actually in perfect condition but I decided to vinyl side. I don’t want to hand nail but shoot nails or staples. I my perfect choice I’d like to use a dewalt cordless coil or medium crown gun. All the...

I snowblower well into my yard area. Set the blower there, drag out the hose and squirt off all the snow. And keeps the blower looking like new.

I just purchased a new 60 gallon single stage air compressor and having a little questions as to a water separator. My air compressor is going to be under roof but on the exterior of my garage. As far as the placement of my water separator, I was thinking it would be proper to run an airline...

Can you post a pic of the end of one of those cords. Are they like three holes in a triangle? I had your exact same problem with losing connections btwn lights. I called the company and they sent me out like 6" patch cords and no all is perfect. Place I got mine was ledshoplights or something...

I’ve told my wife many times, after the funeral, pull what you want aside and call the auctioneer. Too easy.

Exactly. Yes to horizontal tracks the one of which only carries the top rollers of the top section. For some different reasons I’d really like to use the older track if it’s going to work with my door that originally was using low overhead hardware

I was able to find a nice metal 9 x 7 overhead door a friend needed for his storage garage. He now has a wooden door and wanted to replace it. His current door has extension springs and the door I found also had extension springs and also the track was for a low overhead installation. I was...

We’re lucky enough to have a place here that has a couple of these. Sweet machines. Up to 1 3/4 yds. Pull it with a pickup.

A friend bought me a box of these. Works great. No fog.

Ive installed about 6-8 of these for myself and some friends. Have been working great. 240-Degree 2485-Lumen Dual Detection Zone White Hardwired Integrated LED Motion-Activated Flood Light with Timer...

If you were going to have floor drains I would have it put into the contract that water will drain from all areas of the floor into the drains or it will be redone. When I had my garage built a portion behind my wife’s car will run to the back wall causing me to put in some trench drains to...

Id really run from aluminum. There’s a good reason they’re old school. Metal transmit any temperature very easily. So often with the rt temp and interior humidity, you’ll have frost inside on those metal frames.

Ck superbrightleds.com.

If you can stand losing 6” on each side, I’d be studding it out and insulating with 2x6 studs. Did 2x6 in my garage and glad I did here in central Pa. You get some temps lower than us and will benefit. I did osb for my wall material and like it better than dw in my garage

Don’t know if anyone stated but the hinges in the center of the door, ones not on the left and right edges are all usually #1 hinges.