cherrybomb's latest activity
-
C@Sparky Six Axis = The Tsunoda KBN150 consistently gets the highest marks from members here, followed by the smaller KBN125.
-
Ccherrybomb replied to the thread Let's see your Pegboard.Years ago,and I too suffer from CRS,Woodsmith magazine had an article on attaching wooden shelves to peg board.If you have a table saw...
-
Ccherrybomb reacted to d.mcfarland's post in the thread What are some of the tools manufacturers could make, but don't make? with
Like.
Honestly I have no idea why Klein has never made a hard handle version of their iconic handles. Offer it in both the yellow/black and... -
Ccherrybomb reacted to Retired dozer fixer's post in the thread Hydraulic fitting not accessible? with Like.
Looks like a flat face o-ring type fitting. If that’s the case no amount of tightening will stop leak. O-ring needs to be replaced. Mess...
-
Ccherrybomb reacted to Retired dozer fixer's post in the thread How come common metric sets only go to 19mm but common sae sets run to 1” which would be 25mm? with Like.
When you get to 5/8” bolts and larger you should be in 1/2” drive or larger territory for proper torque let alone tool longevity
-
CSorry for your loss. My Dad died almost 23 years ago and I still miss him. I saved a few of his tools to remember him by. This was the...
-
Ccherrybomb reacted to OccupantRJ's post in the thread Is there a socket for this motor thru-bolt head? with Like.
If you have a cheap socket smaller than the widest dimension of the flats of the bolt head grind a slot in it to fit. Just don’t tell...
-
Ccherrybomb reacted to mreisner's post in the thread Is there a socket for this motor thru-bolt head? with Like.
Pipe plug socket either four-sided or eight sided will work if you have the right size one, I've had to do that before..
-
Ccherrybomb reacted to jumbojak's post in the thread The uses and usefulness of different wrench types with Like.
You could describe them that way and be very precise doing so, but if you asked a dealer for some he'd look at you funny and then say...
-
CI bet they are a big seller. They’ve likely sold dozens of sets lol. I can actually think of a few places I’d use something like...
-
CI like semi deep. If I'm only going to grab one rail, it's them. I've got GW in 3/8 and 1/4. They were the only ones available that I...
-
CDamn ya’ll. Without making it complicated, can we all agree that any number, even one, American manufacturing job is something to care...
-
Ccherrybomb replied to the thread Walmart Getting Serious About Tools in 2026?.When you're having thoughts of going shopping at WM.go to the tube and watch ,Larry the Cable Guy and his video on WM after Midnight...
-
Ccherrybomb reacted to BlakeTheCarGuy's post in the thread Walmart Getting Serious About Tools in 2026? with Like.
I was around for the tail end of Popular Mechanics not that I’m old enough to remember them being new but I have a lot that my dad gave...
-
Ccherrybomb reacted to Gmonkee's post in the thread The uses and usefulness of different wrench types with Like.
The more complicated any tool gets, the more moving parts makes it more likely to fail. I had flex head ratcheting wrenches. I have...