The transfer switch is the same as in post #8, just 8 circuits instead of 10. It won’t cost him anything because I had it after replacing it with a 10 circuit transfer switch. Cost or should I say lack of, is the reason for going this route. Appreciate all suggestions so far.
larry4406 is spot on with my dilemma. My son is in NC and I’ll be going down next month to install the panel I have after upgrading to the 10 circuit transfer switch. He’s not inclined to remove the front of the panel. I’ll be curious to find out why there are so many handle tied breakers.
I will be installing an 8 circuit transfer switch for my son to hook up a generator when needed. I’ve installed several of these but all of the breaker boxes have been surface mounted. How would you go about installing a surface mounted transfer switch to a flush mounted circuit breaker box?
Thanks for the delay timer information. That helps with the delay issue.
The pool is 10 feet deep and about 40 feet from the pump so not sure the sump pump float would be feasible.
Thanks again for the suggestions.
We will be away for 2 weeks later this summer. I am looking to install a low/no flow cut off for the 240 volt pool pump for our in ground pool. The main issue is the timing for the pump to operate long enough (usually < minute) to build normal operating pressure. I assume I will need a relay and...
Good afternoon all. I’m toying with the idea of changing out the large/deep drawer on my KRA 2422. I’d like to replace it with 2 shallower drawers. Anyone do this before? Any other ideas to make the drawer more useful? Don’t need it to store bulky items and more drawer space would always be...
Ok, please tell me more about your experiences with Venta. I use 2 wick style humidifiers to avoid the dust but need to replace the wicks every week or so. The Venta seems expensive but certainly may be worth while.